Browse > Article
http://dx.doi.org/10.12989/scs.2010.10.3.207

Performance-based structural fire design of steel frames using conventional computer software  

Chan, Y.K. (Charterwealth Professional Ltd.)
Iu, C.K. (Charterwealth Professional Ltd.)
Chan, S.L. (The Hong Kong Polytechnic University)
Albermani, F.G. (The University of Queensland)
Publication Information
Steel and Composite Structures / v.10, no.3, 2010 , pp. 207-222 More about this Journal
Abstract
Fire incident in buildings is common, so the fire safety design of the framed structure is imperative, especially for the unprotected or partly protected bare steel frames. However, software for structural fire analysis is not widely available. As a result, the performance-based structural fire design is urged on the basis of using user-friendly and conventional nonlinear computer analysis programs so that engineers do not need to acquire new structural analysis software for structural fire analysis and design. The tool is desired to have the capacity of simulating the different fire scenarios and associated detrimental effects efficiently, which includes second-order P-D and P-d effects and material yielding. Also the nonlinear behaviour of large-scale structure becomes complicated when under fire, and thus its simulation relies on an efficient and effective numerical analysis to cope with intricate nonlinear effects due to fire. To this end, the present fire study utilizes a second-order elastic/plastic analysis software NIDA to predict structural behaviour of bare steel framed structures at elevated temperatures. This fire study considers thermal expansion and material degradation due to heating. Degradation of material strength with increasing temperature is included by a set of temperature-stress-strain curves according to BS5950 Part 8 mainly, which implicitly allows for creep deformation. This finite element stiffness formulation of beam-column elements is derived from the fifth-order PEP element which facilitates the computer modeling by one member per element. The Newton-Raphson method is used in the nonlinear solution procedure in order to trace the nonlinear equilibrium path at specified elevated temperatures. Several numerical and experimental verifications of framed structures are presented and compared against solutions in literature. The proposed method permits engineers to adopt the performance-based structural fire analysis and design using typical second-order nonlinear structural analysis software.
Keywords
fire analysis; finite element method; steel structures; nonlinear analysis;
Citations & Related Records

Times Cited By Web Of Science : 1  (Related Records In Web of Science)
Times Cited By SCOPUS : 1
연도 인용수 순위
1 Plank, R.J., Burgess, I.W. and Bailey, C.G. (1996), "Modeling the behaviour of steel-framed building structures by computer", Proceedings of the 2nd Cardington conference: Fire, static and dynamic tests of building structures, 2, 145-160.
2 Rubert, A. and Schaumann, P. (1986), "Structural steel and plane frame assemblies under fire action", Fire. Safety. J., 10(3), 173-184.   DOI   ScienceOn
3 Saab, H.A. and Nethercot, D.A. (1991), "Modelling steel frame behaviour under fire conditions", Eng. Struct., 13(4), 371-382.   DOI   ScienceOn
4 Sanad, A.M., Rotter, J.M., Usmani, A.S. and O'Connor, M.A. (2000), "Composite beams in large buildings under fire: numerical modeling and structural behaviour", Fire Safety. J., 35(3), 165-188.   DOI   ScienceOn
5 Vila Real, P.M.M., Lopes, N., Simoes da Silva, L., Piloto, P. and Franssen, J.M. (2004), "Numerical modeling of steel beam-columns in case of fire-comparisons with Eurocode3", Fire Safety. J., 39(1), 23-39.   DOI   ScienceOn
6 Kirby, B.R. (1996), "British steel technical European fire test programme: design, construction and results", Proceedings of the 2nd Cardington conference: Fire, static and dynamic tests of building structure, 2, 111-126.
7 Kirby, B.R. (1997), "Large-scale fire tests: the British steel European collaborative research programme on the BRE 8-storey frame", Fire safety science: Proceedings of the fifth international symposium, 5, 1129-1140.
8 Landesmann, A., Batista, E.M. and Drummond Alves, J.L. (2005), "Implementation of advanced analysis method for steel-framed structures under fire conditions", Fire. Safety. J., 40(4), 339-366.   DOI   ScienceOn
9 Liew, J.Y.R., Tang, L.K., Holmaas, T. and Choo, Y.S. (1998), "Advanced analysis for the assessment of steel frames in fire", J. Constr. Steel. Res., 47(1), 19-45.   DOI   ScienceOn
10 Liew, J.Y.R. (2004), "Performance based fire safety design of structures - A multi-dimensional integration", Adv. Struct. Eng., Multi-Science, 7(4), 111-133.   DOI
11 Lim, L., Buchanan, A., Moss, P. and Franssen, J.M. (2004a), "Computer modeling of restrained reinforced concrete slabs in fire conditions", J. Struct. Eng., 130(12), 1964-1971.   DOI   ScienceOn
12 Lim, L., Buchanan, A., Moss, P. and Franssen, J.M. (2004b), "Numerical modeling of two-way reinforced concrete slabs in fire", Eng. Struct., 26(8), 1081-1091.   DOI   ScienceOn
13 Ma, K.Y. and Liew, J.Y.R. (2004), "Nonlinear plastic hinge analysis of three-dimensional steel frames in fire", J. Struct. Eng. -ASCE, 130(7), 981-990.   DOI   ScienceOn
14 Najjar, S.R. and Burgess, I.W. (1996), "A nonlinear analysis for three-dimensional steel frames in fire conditions", Eng. Struct., 18(1), 77-89.   DOI   ScienceOn
15 NIDA (2007), Non-linear integrated design and analysis (NAF-NIDA), version 7.
16 Franssen, J.M. (1990), "The unloading of building materials submitted to fire", Fire. Safety. J., 16(3), 213-237.   DOI   ScienceOn
17 Schleich, J.B., Dotreppe, J.C. and Franssen, J.M. (1986), "Numerical simulations of fire resistance tests on steel and composite structural elements or frames", Fire Safety Science: Proceedings of the First International Symposium, 311-323.
18 Eurocode 3. (1993), Design of steel structures, Pt. 1.2: structural fire design(draft). European Committee for Standardization.
19 Franssen, J.M. (1987), Etude du comportement au feu des structures mixtes acier-beton (CEFICOSS). A study of the behaviour of composite steel-concrete structures in fire, These de Doctorat Belgique University de Liege.
20 Franssen, J.M., Kodur, V.K.R. and Mason, J. (2000), User's manual for SAFIR: a computer program for analysis of structures submitted to fire. Internal Report SPEC/2000_03, Belgium, University of Liege, Ponts et Charpentes.
21 Huang, Z., Burgess, I.W. and Plank, R.J. (1999), "Nonlinear analysis of reinforced concrete slabs subjected to fire", ACI Struct. J., 96(1), 127-135.
22 Huang, Z., Burgess, I.W. and Plank, R.J. (2000), "Three-dimensional analysis of composite steel-framed buildings in fire", J. Struct. Eng. -ASCE, 126(3), 389-397.   DOI   ScienceOn
23 ISO 834(1985): Fire resistance test - elements of building construction, International Standards Organization.
24 Iu, C.K. and Chan, S.L. (2004), "A simulation-based large deflection and inelastic analysis of steel frames under fire", J. Constr. Steel Res., 60(10), 1495-1524.   DOI   ScienceOn
25 Iu, C.K., Chan, S.L. and Zha, X.X. (2005), "Nonlinear pre-fire and post-fire analysis of steel frames", Eng. Struct., 27(11), 1689-1702.   DOI   ScienceOn
26 Iu, C.K., Chan, S.L. and Zha, X.X. (2007), "Material yielding by both axial and bending spring stiffness at elevated temperature", J. Constr. Steel Res., 63(5), 677-685.   DOI   ScienceOn
27 ARBED - Research, Luxembourg, University of Liege, Belgium, Buckling curves in case of fire. CEC reseach 7210-SA/515/931/316/618, 1992/95.
28 Jeanes, D.C. (1982), Predicting fire endurance of steel structures, Preprint 82-033, ASCE Convention, Nevada, April 26-30, ASCE.
29 Jeanes, D.C. (1985), "Applications of the computer in modeling the endurance of structural steel floor systems", Fire. Safety. J., 9(1), 119-135.   DOI   ScienceOn
30 ARBED - Research, Luxembourg/ Department of Bridge and Structural Engineering, University of Liege, Belgium - REFAO/CAFIR, computer assisted analysis of the fire resistance of steel and composite steelconcrete structures. CEC research 7210-SA/ 502, Technical reports 1 to 6, 1982/85.
31 BS5950 Part 8 (1990), Structural use of steelwork in building: Code of practice for fire resistant design.
32 Bailey, C.G. (1998), "Development of computer software to simulate the structural behaviour of steel-framed building in fire", Comput. Struct., 67(6), 421-438.   DOI   ScienceOn
33 Chan, S.L. (1988), "Geometric and material nonlinear analysis of beam-columns and frames using minimum residual displacement method", Int. J. Numer. Meth. Eng., 26(12), 2657-2669.   DOI   ScienceOn
34 Chan, S.L. and Zhou, Z.H. (1995), "Second order elastic analysis of frames using single imperfect element per member", J. Struct. Eng.-ASCE, 121(6), 939-945.
35 Crisfield, M.A. (1981), "A faster incremental-iterative solution procedure that handles snap-through", Comput. Struct., 13(1-3), 55-62.   DOI   ScienceOn
36 Dotreppe, J.C., Franssen, J.M. and Schleich, J.B. (1982), Computer aided fire resistance for steel and composite structures, Review acier/Stahl/Steel No. 3.
37 El-Zanaty, M.H. and Murray, D.W. (1983), "Nonlinear finite element analysis of steel frames", J. Struct., 109(2), 353-368.   DOI   ScienceOn