• 한국초지조사료학회지
• /
• 제20권2호
• /
• pp.123-130
• /
• 2000

This study was carried out to examine the effects of animal manure on efficiency of the nitrogen utilization of silage corn (Zea mays L.) and soil fertility. The experiment was conducted on the field plot at Gongiam, Kwangju, Kyunggi-Do for 3 years, from 1996 to 1998, and arranged in split-plot design with three replications. The main plots were two kinds of composts such as swine manure fermented with sawdust (SMFWS) and swine manure fermented without sawdust (SMF). Subplots were the nitrogen fertilization rate (0, 100, 200, 300 and 400kgNhalyear). The nitrogen (N) yield increased as the nitrogen fertilization rate increased up to a rate of 300 kg Nha, but decreased at rate of 400 kg Nlha. Nitrogen yield in SMF treatments was higher than that of SMFWS treatments. But there were no significant differences between SMFWS and SMF treatments. Organic matter (OM) content of the soils in SMFWS was higher than that of SMF, &d was not significantly different between SMFWS and SMF treatments. OM content increased with increasing the nitrogen fertilization rate. Total nitrogen (TN) content of the soils increased as the nitrogen fertilization rate increased. No difference of TN content was found between SMFWS and SMF treatments. (Key words : Swine manure, Compost, Corn, Sawdust, Nutritive value)

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권6호
• /
• pp.891-894
• /
• 1999

A field experiment was conducted with Calliandra calothyrsus of fifteen provenances to evaluate the variation in the condensed tannin content of fresh leaves. Plants were raised in a nursery for three months and planted in the field. Experimental design was line planting of double hedgerows (3 m long plot, 1/2 meter interval, 45 plants in each plot) with 5 replicates. Plants were lopped every 5 months and samples (10 different plants within a plot; 4 newly flushed leaves, 4 partially expanded leaves and 4 mature full expanded leaves from each of 10 trees in a plot) were collected and were put on ice before transfer to the laboratory. Proanthocyanidine was extracted in aqueous acetone, and total extractable proanthcyanidine (TEPA) and total proanthocyanidine (TOPA) were measured. In addition, proximate analyses were made of different provenances. Crude protein contents varied from 19.74% to 16.45%; in vitro organic matter digestibility ranged from 36.09% to 23.32%. TEPA content ranged from 11.22 to 16.01 (measured as absorbance at $550nm,\;g^{-1}$ DM) and TOPA from 24.57 to 31.72 (measured as absorbance at $550nm,\;g^{-1}$ DM) TEPA and TOPA had a positive correlation, whereas crude protein content of Calliandra was negatively correlated with TEPA and TOPA. Provenances, such as Georgesville (Belize), local, Coban (Guatemala), Patulul (Guatemala), Bombana (Mexico) can be selected on the basis of nutritive value of fodder.

• 인터넷정보학회논문지
• /
• 제16권4호
• /
• pp.25-37
• /
• 2015

본 연구에서는 모바일 환경에서 사용자가 원하는 마커 위에 2D 이미지, 3D 모델, 동영상과 같은 가상객체를 증강시키고 인터랙션 이벤트를 연결시켜 주는 모바일 증강현실 콘텐츠 빌더(MARB ; Moblie AR contents Builder, 이하 MARB)를 개발하였다. MARB은 사용자가 원하는 마커 위에 다양한 가상객체를 증강시켜주며, 마커에 따른 여러 인터랙션 이벤트를 선택적으로 제공한다. 또한 모바일 환경에서 간편하게 구동하기 위해 모바일 콘텐츠 형태로 개발되었으며, 모바일기기에 설치하면 간단한 GUI(Graphical User Interface)를 이용한 저작이 가능하다. MARB은 기존 개발자뿐만 아니라 일반 사용자가 모바일 콘텐츠를 자유롭게 저작할 수 있도록 하여 다양한 모바일 증강현실 콘텐츠를 원하는 사용자들에 의해 다방면적으로 활용될 것으로 기대되며, 모바일 증강현실 시장 확장에 걸림돌이 되고 있는 모바일 증강현실 콘텐츠 개발의 어려움을 극복하는데 기여할 것으로 예상된다.

• Journal of Electrical Engineering and Technology
• /
• 제13권4호
• /
• pp.1586-1595
• /
• 2018

For the problem that the complexity of 3-D modeling and multi parameter optimization, as well as the uncertainty of the winding factor of axial flux permanent magnet generator with coreless windings. The complex 3-D model was simplified into 2-D analytic model, and an analytical formula for the winding factor that adapting different coreless stator winding is proposed in this paper. The analytical solution for air-gap magnetic fields, no-load back EMF, electromagnetic torque, and efficiency are calculated by using this method. The multiple objective and multivariable optimization of the maximum fundamental and the minimum harmonic content of back EMF are performed by using response surface methodology. The proposed optimum design method was applied to make a generator. The generator was tested and the calculated results are compared with the proposed method, which show good agreements.

• Animal Bioscience
• /
• 제36권10호
• /
• pp.1536-1545
• /
• 2023

Objective: The objective was to evaluate the effects of UV-B irradiated vitamin D-enriched yeast supplementation on milk yield, milk composition, vitamin D in milk, milk fatty acids, blood chemistry, and 25(OH)D status in dairy cows. Methods: Six Thai Friesian cows (milk production, 11.2±2.0 kg/d; body weight, 415.0±20.0 kg; and days in milk, 90.0±6.0) were allocated to each treatment in a 3×3 Latin square design, with three treatments and three periods. Each period of the Latin square lasted 49 days consisting of 14 days for diet adaptation and 35 days for sample collection. Dairy cows were randomly assigned to one of three treatments: i) feeding a basal diet without yeast (CON); ii) basal diet + 5 g of live yeast (75 IU/head/d of vitamin D₂; LY); and iii) basal diet + 5 g of UV-B irradiated vitamin D enriched yeast (150,000 IU/head/d of vitamin D₂; VDY). Feed intake and milk production were recorded daily, milk sample collection occurred on days 14 and 35 of each collection period, and blood plasma was collected on days 0, 7, 14, 21, 28, and 35 of each collection period. Results: The results show that after a trial period of 14 and 35 days, the VDY group had significantly higher vitamin D content in milk than the LY and CON groups (376.41 vs 305.15, 302.14 ng/L and 413.46 vs 306.76, 301.12 ng/L, respectively). At days 7, 14, 21, 28, and 35 of the experiment, cows fed the VDY group had significantly higher 25(OH)D₂ status in blood than the CON and LY groups (51.07 vs 47.16, 48.05 ng/mL; 54.96 vs 45.43, 46.91 ng/mL; 56.16 vs 46.87, 47.16 ng/mL; 60.67 vs 44.39, 46.17 ng/mL and 63.91 vs 45.88, 46.88 ng/mL), respectively. Conclusion: In conclusion, UV-B irradiated vitamin D-enriched yeast supplementation could improve vitamin D content in the milk and 25(OH)D status in dairy cows during the lactation period.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 2002년도 총회 및 춘계학술발표회
• /
• pp.73-76
• /
• 2002

Biofilter performance to reduce C $H_4$ emissions from MSW landfills was tested under a variety of environmental and design conditions. The optimum soil moisture content for C $H_4$ oxidation in a loamy sand was 13% by weight. The addition of N $O_3$-N did not affect the C $H_4$ oxidation rate. Soil depths of 30cm and 60cm were equally efficient in C $H_4$ oxidation. When the C $H_4$ loading rate was decreased, the percentage of C $H_4$ oxidized increased. The maximum C $H_4$ oxidation rate was 27.2 mol $m^{-2}$ $d^{-1}$ under optimum conditions (loamy sand soil, 13% moisture content, 30cm soil depth, and an loading rate of 32.8 mol $m^{-2}$ $d^{-1}$). Based on the above results, the installation of a properly sized and managed biofilter above a landfill cover should be capable of achieving a major reduction in atmospheric methane emissions from MSW landfills built with RCRA covers.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.201-211
• /
• 2015

Purpose: Designing equipment for processing, sorting, and other post-harvest operations of agricultural products requires information about their physical properties. This study was conducted to investigate some of the mechanical and physical properties of Moringa oleifera L. pods and seeds. Methods: Properties such as the length, width, thickness, bulk density, porosity, mass, static coefficient of friction, and angle of repose were determined as a function of moisture content. Statistical data and force-deformation curves obtained at each loading orientation and moisture level were analyzed for bioyield point, bioyield strength, yield force, rupture point, and rupture strength using a testrometric machine. Result: The basic dimensions (length, width, and thickness) of moringa pods and seeds were found to increase linearly from 311.15 to 371.45 mm, 22.79 to 31.22 mm, and 22.24 to 29.88 mm, respectively, in the moisture range of 12 to 49.5% d.b. The coefficient of friction for both pods and seeds increased linearly with an increase in moisture content on all the surfaces used. The highest value was recorded on mild steel, with 0.581 for pods and 0.3533 for seeds, and the lowest on glass for pods, with a value of 0.501, and of 0.2933 for seeds on galvanized steel. The bioyield and rupture forces, bioyield and rupture energies, and deformation of the pods decreased with an increase in moisture content to a minimum value, then increased with further decrease within the moisture content range, while the yield force increased to a maximum value and then decreased as the moisture content increased. Conclusion: These results will help to determine the most suitable conditions for processing, transporting, and storing moringa pods, and to provide relevant data useful in designing handling and processing equipment for the crop.

• 한국콘텐츠학회논문지
• /
• 제9권8호
• /
• pp.166-177
• /
• 2009

의학 기술의 발달과 저 출산 현상으로 인구의 고령화가 진행되어감에 따라, 실버세대를 위한 다양한 문화와 산업이 대두되고 있다. 실버 세대는 상대적으로 많은 여가시간을 보내기 위해 다양한 사회 활동과 문화 콘텐츠를 경험하길 원하지만, 노령화에 따른 신체적 심리적 정신적 기능 저하로 인해 제약이 따르게 된다. 본 논문에서는 실버 세대들이 사회활동에서 가장 필요로 하는 이동성 확보에 도움이 되는 하체 단련과 체력 증진 기능을 갖춘 체감형 자전거 게임 콘텐츠를 제안한다. 제안된 게임 콘텐츠는 실버세대에게 익숙한 자전거라는 기구를 이용하여 노인들에게 적합한 게임 구성과 디자인을 통해 게임에 대한 흥미를 유발시킬 수 있다. 노인들은 게임의 몰입감을 증대시키기 위해 개발된 체감형 인터페이스와 실시간 3D 그래픽스 디스플레이를 통해 놀이와 운동을 동시에 즐기며 여가시간을 활용할 수 있다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권10호
• /
• pp.1429-1436
• /
• 2006

Fermentation characteristics, nutrient retention and aerobic stability of barley silages prepared using 6 commercial inoculants were evaluated using 126 mini-silos (3-L) in a completely randomized design. Whole barley forage was chopped, wilted to 39% DM and treated with water (control, S) or one of six inoculants: A (containing Lactobacillus plantarum); B (L. plantarum and Enterococcus faecium); C (L. plantarum and Pediococcus cerevisiae); D (L. plantarum, Pediococcus pentosaceus and Propionibacterium freudenreichii, plus hydrolytic enzymes); E (Lactobacillus buchneri plus hydrolytic enzymes); F (L. buchneri and P. pentosaceus plus hydrolytic enzymes). Samples of treated forage were collected for analysis at the time of ensiling, and then 18 silos of each treatment were filled, capped and weighed. Triplicate silos were weighed and opened after 1, 3, 5, 7, 33, and 61 d. On d 61, $400{\pm}5g$ of material from each silo was placed in 1-L styrofoam containers, covered with cheesecloth and held at room temperature. Silage temperature was recorded hourly for 14 d via implanted thermocouple probes. Chemical composition of the forage at ensiling was consistent with previously reported values. At d 61, pH was lowest (p<0.01) in silage S. Ammonia-N was lower (p<0.05) in silage A than in silages S, B, E, or F. Compared to pre-ensiling values, water soluble carbohydrate concentrations were elevated in silages S, A, B, C and D, and decreased in E and F. Lactic acid concentrations were similar (p>0.10) across treatments. Acetic acid levels were highest (p<0.01) in silage E and lowest (p<0.01) in silage D. Recovery of DM was lower (p<0.01) in silage F than in silages S, A, B, C, or D. On d 61, yeasts were most numerous (p<0.01) in silage D, which was the only silage in which temperature rose more than $2^{\circ}C$ above ambient during aerobic exposure. Silage D also had the highest (p<0.01) pH and ADIN content after aerobic exposure. Lactic acid and WSC content of silage D decreased dramatically during the 14-d aerobic exposure period. Yeast counts (at d 14 of exposure) were lowest (p<0.01) in silages E and F. In general, the commercial inoculants did not appear to enhance the fermentation of barley silage to any appreciable extent in laboratory silos.

• 실천공학교육논문지
• /
• 제13권2호
• /
• pp.221-232
• /
• 2021

본 연구는 코로나 19로 인하여 발생한 비대면 수업 환경에서 학습자들의 요구 분석을 토대로 플립 러닝과 메이커 교육 기반 인공지능 융합 교양 교과목의 설계 방향을 탐색하는데 그 목적이 있다. 이를 위해 메이커 교육 기반 인공지능융합 교양 교과목을 수강한 학생들과 수강하지 않은 학생들을 대상으로 플립 러닝에 대한 학생들의 인식과 함께 학습자의 교육 요구도를 조사하였다. 이를 바탕으로 Borich 교육 요구도와 The Locus for Focus Model 모델을 활용하여 교과목 내용 요소에 대한 우선 순위를 분석함으로써 교과목 설계를 위한 기초 자료로 활용하였다. 연구 결과는 다음과 같다. 첫째, 메이커 교육 기반의 인공지능 교양 교과목 내용 요소는 총 9개 영역으로 구성되었으며 플립 러닝을 활용하는 수업으로 설계되었다. 둘째, 교육 요구가 가장 높은 영역은 '인공지능 이론', '인공지능 프로그래밍 실습', '피지컬 컴퓨팅 이론', '피지컬 컴퓨팅 실습'이, 차 순위는 '융합프로젝트', '3D 프린팅 이론', '3D 프린팅 실습'으로 결정되었다. 셋째, 플립 러닝을 활용하여 메이커 교육 기반 인공지능융합 교양 교과목을 운영하는 것은 수강 경험의 유무와 상관없이 대부분 긍정적인 응답이었으며 수강 경험이 있는 학생들의 경우에는 만족도가 매우 높았다. 이를 바탕으로 플립러닝과 메이커교육을 활용한 인공지능 기반의 융합 교양 교과목이 설계되었다. 이는 학생들의 요구를 반영하여 교양 교육에서 인공지능 융합 교육의 기초를 마련하고 대학생의 인공지능 소양 함양의 기회를 제공한다는데 의의가 있다.