• Journal of Conservation Science
• /
• v.33 no.1
• /
• pp.43-49
• /
• 2017

The ancient paper document we chose as a case study for our research is "One Hundred Poets of the Tang Dynasty", which is housed in the Ryukoku University Library. The purpose of this research is to introduce a method to analyze the surface roughness and microstructure at a high resolution. In addition, we attempt to quantitatively measure the surface unevenness of the types and curve structure. We used a tridimensional digital microscopy as a non-contact and a non-destructive method to study ancient cultural paper. The information contained in the paper may be lost in the process of applying strong pressure to clean and lining or press. However, this microscopic measurement method can non-destructively analyze a large amount of data in old printed books. Moreover, it enables observing them directly with reflected light. Therefore, this method may be useful for collecting printed information remaining on the surface of the paper.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.14 no.2
• /
• pp.189-197
• /
• 1996

Digital Elevation Model, Ortho-image, and 3-D positional data of terrain features are indispensable elements for producing 3-D image information. In this research, digital pbotogrammetric studies were conducted to measure the 3-D positional data on high performance computer systems in order to replace analytical stereo-plotter-oriented tasks with those of digital workstations. Especially, technical approaches to measure these data on stereo workstation were developed and then the results were applied on SPOT satellite images. As the result of this study, the possibilities of the proposed technologies were tested and proved based on the ap-plication of the digital photogrammetric processes to extract 3-D ground coordinates of terrain features from digital satellite imagery.

• Journal of Digital Convergence
• /
• v.14 no.3
• /
• pp.329-335
• /
• 2016

This paper's objective is to investigate the display fatigue quantitatively according to watching 2D and 3D videos on the display. Though it has been known commonly that display fatigue by 3D is greater than one by 2D, there have been few researches with an aim to measure display fatigue scientifically. Flicker fusion frequency and cybersickness degree were measured before/after sixteen subjects(Male 8, Female 8) watch the 2D, 3D images. Two dependent variables affected by 2D and 3D videos were analyzed and compared statistically based on scientific evidences and researches. 3D showed a value 4 times as much as 2D in cybersickness increase rate, and the reduction rate of 3D was 2 times as much as that of 2D.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.765-772
• /
• 2011

In this paper, a simulation-based method is presented to dispose direction finders in three dimensional space for locating targets using the directional data. A direction finder(DF) is a military weapon that is used to find locations of targets that emit radio frequencies by operating two or more DFs simultaneously. If one or more DFs are operated in the air, the accuracy of location estimation can be enhanced by disposing them in a better configuration. By extending the line method, which is a well-known algorithm for 2-D location estimation, into 3-D space, the problem of 3-D location estimation is defined as an nonlinear programming form and solved analytically. Then the optimal disposition of DFs is considered with the presented method in which methods of simulation and search technique are combined. With the suggested algorithm for 3-D disposition of DFs, regions in which targets exist can be effectively covered so that the operation effect of DF be increased.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.31 no.4
• /
• pp.207-213
• /
• 2018

This paper investigates applicability of Microsoft $Kinect^{(R)}$, RGB-depth camera, to implement a 3D image and spatial information for sensing a target. The relationship between the image of the Kinect camera and the pixel coordinate system is formulated. The calibration of the camera provides the depth and RGB information of the target. The intrinsic parameters are calculated through a checker board experiment and focal length, principal point, and distortion coefficient are obtained. The extrinsic parameters regarding the relationship between the two Kinect cameras consist of rotational matrix and translational vector. The spatial images of 2D projection space are converted to a 3D images, resulting on spatial information on the basis of the depth and RGB information. The measurement is verified through comparison with the length and location of the 2D images of the target structure.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.969-970
• /
• 2008

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.7
• /
• pp.67-74
• /
• 2010

TIn this paper, it is designed the polarization selective antenna for UHF RFID system. The proposed antenna is consist of microstrip patch antenna with dual feeding and two SPDT switches and a SP4T switch and 3dB hybrid coupler. Through control of voltage of switches, the proposed reader antenna can select horizontally linear polarization, vertically linear polarization, left-hand circular polarization (LHCP) and right hand circular polarization (RHCP). The proposed reader antenna satisfied 2:1 VSWR at 902MHz~928MHz. and it has under 3dB AR(axial ratio). Peak gain of antenna is 7.71dBi, 7.55dBi with linear polarization and 7.31dBic, 7.81dBic with circular polarization at x-y plane. Also Axial ratio of antenna is 2.01~2.83dB and 2.02~2.60dB respectively. It is satisfied 3dB axial ratio.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.5
• /
• pp.1074-1079
• /
• 2004

So far, many sensors such as a structured grid pattern generator, a laser, and CCD camera to obtain 3D information have been used, but most of algorithms for a calibration are inefficient since a huge memory and experiment time are required. In this paper, the calibration algorithm of a structured grid pattern based on triangulation method is introduced to calculate 3D information in the real world. The beams generated from structured grid pattern generator established horizontally with the CCD camera are projected on the calibration plat. A CCD camera measures the intersection plane of a projected beam and an object plane. The 3D information is calculated using measured and calibration datum. This proposed method in this paper has advantages such as a memory saving and an efficient experimental time since the 3D information is obtained simply the triangulation method.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.6
• /
• pp.694-699
• /
• 2012

In this paper, semiconductor package inspection results using white light interferometer with large F.O.V., in order to apply semiconductor product inspection process, are shown. Experimental 3D data repeatability test results for the same special bumps of each substrate are shown. Experimental 3D data repeatability test results for all the bumps in each substrate are also shown. Semiconductor package inspection using white light interferometer with large F.O.V. is very important for the fast 3D data inspection in semiconductor product inspection process. This paper is surely helpful for the development of in-line type fast 3D data inspection machine.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.330-333
• /
• 2016

In this paper, we propose 77 GHz power amplifier for long range automotive collision avoidance radar using 65 nm CMOS process. The proposed circuit has a 3-stage single power amplifier which includes common source structure and transformer. The measurement results show 18.7 dB maximum voltage gain at 13 GHz 3 dB bandwidth. The measured maximum output power is 10.2 dBm, input $P_{1dB}$ is -12 dBm, output $P_{1dB}$ is 5.7 dBm, and maximum power add efficiency is 7.2 %. The power amplifier consumes 140.4 mW DC power from 1.2 V supply voltage.