• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.156-158
• /
• 2010

선박운항자의 인적사고 방지 및 운항 훈련을 위한 방안으로 선박 운항 시뮬레이터가 사용된다. 선박운항 시뮬레이터에서 실시간 3D 가시화 기술은 현실감 있는 직관적인 영상을 제공하여 피교육자에 인지력을 향상시켜 시뮬레이터의 교육 효과를 높이는 중요한 요소이다. 본 논문에서는 선박 운항 시뮬레이터 장착된 실시간 가시화 시스템의 확장성 및 독립성을 확보하기 위해서, 가시화 시스템의 상업용 그래픽 엔진을 공개형 그래픽 엔진으로 대체하기 위해서 수행된 실시간 3D 가시화 시스템의 설계 결과에 대해서 설명한다. 실시간 3D 가시화 시스템은 요소 기능, 그래픽 데이터 활용, 타 시스템과의 연동 측면에서 도출된 운용 요구사항들을 만족하도록 설계되었고 시스템의 확장성과 상호운용성의 확보도 고려하였다.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.334-337
• /
• 2003

GSM / DCS1800 / PCS 대역에서 사용 가능한 9.5mm x 6.5mm 크기의 트리플 밴드 초소형 전압제어 발진기를 설계하였다. 설계된 트리플 밴드 VCO는 GSM(880∼915MHz) 대역에서 7±3dBm의 출력전력, DCS1800 (1720∼1785MHz) 대역에서 8±3dBm의 출력전력, PCS(1720∼1780MHz) 대역에서 0±3dBm의 출력전력의 특성을 보인다. 위상 잡음의 특성은 -110dBc @100KHz 이하의 만족할만한 성능을 보인다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.11b
• /
• pp.945-948
• /
• 2003

본 논문에서는 전자상거래 사이트 구축에 사용성 공학의 관정에서 3DMax, Shockwave3D, Lingo Script 기술을 사용하여 3D 가상 시뮬레이션을 설계하고 구현하였다. 특히 본 연구에서 구현한 렌탈 사이트의 ‘내방꾸미기’ 3D가상 시뮬레이션에서는 고객이 원하는 가구를 대여하기 전에 방의 크기와 스타일에 맞추어 3 차원 공간에 동적으로 다양하게 배치해 볼 수 있도록 하여 추후에 발생할 수 있는 문제점을 사전에 방지할 수 있도록 하였다.

• Journal of Energy Engineering
• /
• v.25 no.1
• /
• pp.108-112
• /
• 2016

This study is established the data-centric design concept, which is the latest design technique, by analyzing existing study literature for its application on the nuclear power plant industry in Korea. This study investigated the data-centric design cases in the advanced companies and suggests a data-centric design integrated system framework by analyzing the major functions of the commercial 3D CAD system, which is globally used in the plant architect engineering. In order to apply the data-centric design integrated system framework to the nuclear power plant industry in Korea, the main functions of a nuclear power plant design information integrated system framework, which can manage the design products of each EPC step and the related information in integrated way, is suggested by analyzing the supplier design, field design process and field design drawings, which have close relation with the plant Architect Engineering (A/E). It is expected that the result of this study would contribute in the dramatic enhancement in the job efficiency of nuclear power plant design process in Korea.

• Proceedings of the Korea Contents Association Conference
• /
• 2005.11a
• /
• pp.446-449
• /
• 2005

At developing 3D contests, there are problems that it is difficult to team skills about software developing 3D contents and to product different types of 3D contents using different softwares. In this paper for solving problems, we design the Wk based scenario manipulation language. And we are able to product 3D contents using XML based scenario by developing 3D contents manipulation system.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.583-590
• /
• 2008

In construction work's design process, we must carry out a topographical survey for construction reserved land and to the basis of this, production of profile is indispensable factor for the purpose of every construction work such as road, rail way, canal and etc. From this research, the production of profile about construction reserved land, using topographical information of digital topographical map produced by NGIS project, construct precision 3D terrain model and from this, propose plans for utilizing by producing automatic profile. With the aim of this, extract every layers of main facilities and altitude from digital topographical map and while producing 3D terrain model by using this, we product automatic profile from precision 3D terrain model. And we was carried out to check whether the automatic produced profile's accuracy could be accepted at actual estimation by mutual analysis. It is considered that the result of the research could be suggested as a new techniques concept which can reduce the designing period and expenses and increase the efficiency of affair in the design process for the construction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.10
• /
• pp.319-330
• /
• 2016

Recently, 3D printing technology has been applied to make a concept model and working mockup of an industrial application. On the other hand, this technology has limited applications in industrial products due to the materials and reliability of the 3D printed product. In this study, the components of a full cord switch module are proposed as a case of a 3D printed component that can be used as a substitute for a short period. These are hub-driven and lever lockup components that have the structural characteristics of breaking down frequently in the emergency operating status. To ensure the structural strength for a substitute period, research of structure optimization was performed because 3D printing technology has a limitation in the materials used. After optimizing the structure variables of the hub-driven component, reasonable results can be drawn in that the safety factors of the left and right switching mode are 1.243 (${\Delta}153.67%$) and 3.156 (${\Delta}404.96%$). The lever lockup component has a structural weak point that can break down easily on the lockup-part because of a cantilever shape and bending moment. The rib structure was applied to decrease the deflection. In addition, optimization of the structural variables was performed, showing a safety factor of 7.52(${\Delta}26%$).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.2 s.344
• /
• pp.24-33
• /
• 2006

The effective geometry processing IP architecture for mobile SoC that has real time 3D graphics acceleration performance in mobile information system is proposed. Base on the proposed IP architecture, we design the floating point arithmetic unit needed in geometry process and the floating point geometry processor supporting the 3D graphic international standard OpenGL-ES. The geometry processor is implemented by 160k gate area in a Xilinx-Vertex FPGA and we measure the performance of geometry processor using the actual 3D graphic data at 80MHz frequency environment The experiment result shows 1.5M polygons/sec processing performance. The power consumption is measured to 83.6mW at Hynix 0.25um CMOS@50MHz.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.147-154
• /
• 2018

This paper focuses on the development of a support system that can rapidly generate the design data of a hot-form die with cooling channels, commonly known as hot stamping technology. We propose a new process for designing hot-form dies based on our (automated) system, whose main features are derived from the analysis of the design requirements and design process in the current industry. Our design support system consists of two modules, which allow for the generation of a 3D geometry model and its 2D drawings. The module for 3D modeling automation is implemented as a type of CATIA template model based on CATIA V5 Knowledgeware. This module automatically creates a 3D model of a hot-form die, including the cooling channels, that depends on the shape of the forming surface and the number of STEELs (subsets of die product) and cooling channels. It also allows for both the editing of the positions and orientations of the cooling channels and testing for the purpose of satisfying the constraints on the distance between the forming surface and cooling channels. Another module for the auto-generation of the 2D drawings is being developed as a plug-in using CAA (CATIA SDK) and Visual C++. Our system was evaluated using the S/W test based on a user defined scenario. As a result, it was shown that it can generate a 3D model of a hot form die and its 2D drawings with hole tables about 29 times faster than the conventional manual method without any design errors.

• Journal of the Korea Convergence Society
• /
• v.9 no.5
• /
• pp.113-119
• /
• 2018

The purpose of this study is to verify the effect of participating in teaching material development program using 3D printer on the recognition of universal design for learning of early childhood special education pre-service teachers. This study was conducted on 30 early childhood special education pre-service teachers who participated in teaching material development program using 3D printer. The results of this study showed that the early childhood special education pre-service teachers use of the 3D printer-based teaching material development program resulted in statistically significant differences in the 4 low rank factors of the universal design for learning. This research shows that direct experience in developing teaching material using 3D printers is very effective to improve universal design for learning awareness. In addition, the experience of developing teaching material for pre-service early childhood teachers is important for improving the instructional design ability, and they need the practice of the development of the teaching material using the latest technology for teaching students with various needs.