• Korean Journal of Food Science and Technology
• /
• v.26 no.3
• /
• pp.199-203
• /
• 1994

Software for refrigerator capable of both rapid fermentation and suitable storage of Kimchi was developed and its performance was investigated. Refrigerator system consists of an insulated fermentation room, heater, damper for the control of outer cold air and two sensors for recognizing temperature of heater and fermentation room, which control temperature and time period of affecting Kimchi fermentation. Effects of fermentation at different NaCl concentration and three fermentation function keys were studied; At key I, time which was elapsed to edible ripening state, pH 4.5 and total acid 0.6%, was about $3{\sim}4$, $4{\sim}5$ and $11{\sim}12$ days, respectively. At key II, time was about $2{\sim}3$, $3{\sim}4$, and $10{\sim}11$ days, and at key III, about 2, 3 and $9{\sim}10$ days, respectively. Effect of storage at three fermentation function keys was all maintained to the level of a palatable pH range until 14 days. Sensory evaluation of Kimchi showed also significant difference in a taste.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.3
• /
• pp.223-233
• /
• 2016

Design of a vegetation type sound barrier was presented as a noise barrier on the boundary of neighborhood facilities including schools, and apartments. The suggested noise barrier is made of unit blocks that are to be formed by stacking over the wall structure containing the plant and soils in the blocks. The advantage of the vegetation noise barrier is to acquire not only sound absorptive effects of plants and soils, but also sound diffusive effect caused by the irregular surface of the barrier which could eventually mitigate the noise. First, the optimum size of the units to obtain the highest noise reduction was investigated using 1/10 scaled model experiment, and sound attenuation experiments were carried out using a 1/2 mock-up model which is 2 m high and 5 m long. Total 1,137 unit blocks were made of synthetic woods with the size of $10{\times}10{\times}9cm$. These unit blocks were installed on the both side of the 1/2 mock-up steel framed noise barrier. As a result, it was revealed that the block typed vegetation noise barrier has 7 dB higher insertion loss in comparison with the general plane noise barrier. Also, it was found that the appropriate size of unit blocks is $20{\times}20cm$ which has large effect of sound insertion loss.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.2
• /
• pp.1-13
• /
• 2018

This work discusses the major roles of digital technologies in the history of landscape architectural drawing, and offers a critique of the dominant trend towards realism in recent digital landscape representations. During the period of transition from conventional drawing tools, computer technologies generally functioned as mechanical tools to imitate prior manual techniques. Specifically, the GIS was served as a mechanical tool to efficiently process the manual layer cake; CAD software generally functioned to translate physical models to two-dimensional construction documents while graphic software generally functioned as a tool to perform processes similar to those of manual collage and montage techniques. Recent digital landscape drawings tend to adopt a realistic depiction like the painting of landscape appearance. In the representations, discernible traces of cutting and assembling are removed via graphic software; thus, the complete representations are perceived as if they were a copy of an actual landscape. The realistic images are an easy way to communicate with the public. However, it is difficult to achieve a full embodiment of all of the multisensory characteristics of a landscape through these visuals. They often deceive viewers by visualizing idealized conditions of not-yet-actualized landscapes and production of the final images takes up a large portion of the overall design process. Alternatively, 3D digital modeling of landscape performance and creative uses of digital technologies during the overall design process, as well as hybridized techniques with different drawing techniques and technologies, provide the opportunity to explore various aspects of a landscape.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.331-339
• /
• 2013

LiDAR has been one of the widely used and important technologies for 3D modeling of ground surface and objects because of its ability to provide dense and accurate range measurement. The objective of this research is to develop a method for automatic detection and modeling of railroad power lines using high density LiDAR data and RANSAC algorithms. For detecting railroad power lines, multi-echoes properties of laser data and shape knowledge of railroad power lines were employed. Cuboid analysis for detecting seed line segments, tracking lines, connecting and labeling are the main processes. For modeling railroad power lines, iterative RANSAC and least square adjustment were carried out to estimate the lines parameters. The validation of the result is very challenging due to the difficulties in determining the actual references on the ground surface. Standard deviations of 8cm and 5cm for x-y and z coordinates, respectively are satisfactory outcomes. In case of completeness, the result of visual inspection shows that all the lines are detected and modeled well as compare with the original point clouds. The overall processes are fully automated and the methods manage any state of railroad wires efficiently.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.543-553
• /
• 2008

Shipbuilding is a kind of ETO(Engineering To Order) industry which designs and produces a product in accordance to various requirement of customers, rules and regulations. Recently, the number of ordered ships has been increased by up to two or three times in each domestic shipyards. Most shipyards have been adopted 3D ship CAD, ERP(Enterprise Resource Planning) and APS(Advanced Planning System) to get an efficient product development and manufacturing system. However, not only the effective operation of 3D ship CAD, ERP and APS but also the production efficiency can be achieved only if product information management which can manages the product data is implemented in an integrated environment. Present study has suggested a systematic approach to implement a PLM system to manage the product data in early design shipbuilding. Also, a prototype of PLM is implemented to manage the product data in a basic ship-design. In the prototype system, a product structure and architecture of PLM is considered.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.1025-1032
• /
• 2006

Sensor modeling of high-resolution satellites is a prerequisite procedure for mapping and GIS applications. Sensor models, describing the geometric relationship between scene and object, are divided into two main categories, which are rigorous and approximate sensor models. A rigorous model is based on the actual geometry of the image formation process, involving internal and external characteristics of the implemented sensor. However, approximate models require neither a comprehensive understanding of imaging geometry nor the internal and external characteristics of the imaging sensor, which has gathered a great interest within photogrammetric communities. This paper described a comparison between rigorous and various approximate sensor models that have been used to determine three-dimensional positions, and proposed the appropriate sensor model in terms of the satellite imagery usage. Through the case study of using IKONOS satellite scenes, rigorous and approximate sensor models have been compared and evaluated for the positional accuracy in terms of acquirable number of ground controls. Bias compensated RFM(Rational Function Model) turned out to be the best among compared approximate sensor models, both modified parallel projection and parallel-perspective model were able to be modelled with a small number of controls. Also affine transformation, one of the approximate sensor models, can be used to determine the planimetric position of high-resolution satellites and perform image registration between scenes.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.35 no.8
• /
• pp.1088-1096
• /
• 2006

The purpose of this study was to identify the service encounter blueprint by types of restaurants in order to manage moment of truth when customers who visit a restaurant encounter services. The service encounter blueprint gives an overall picture of the service provision to visualize an entire service process and its integrated structure. The blueprint is used for service process analysis technique. The random samples of 15 customers were observed by types of restaurants and the records were collected for three-days' observation. Interviews were performed by 3 managers, 3 service encounter employees, 3 cashiers, 3 cooks and 10 customers by types of restaurants. After drawing the first service blueprint, it was revised by the interview with the 3 managers and 6 service encounter employees. In this paper, restaurant service processes are reviewed and analyzed. By use of service blueprint, the processes are analyzed to find a fail point, customer wait, employee decision. As a result of making a blueprint of service encounter by types of restaurant, blueprints of fine-dining restaurants and family restaurants were similar, while fast-food restaurants showed a little difference. In particular, difference was indicated in a point where interaction of service encounter occurred. Difference was indicated depending on types of restaurants. Therefore, the efforts to improve this problem were needed. The blueprint is a map or flowchart (called a process chart in manufacturing) of all transactions constituting the service delivery process. The results showed that service encounter blueprint can be used to improve the service process in the restaurant's encounter.

• Korean Journal of Microbiology
• /
• v.46 no.4
• /
• pp.313-318
• /
• 2010

Deinococcus radiodurans RecA protein, when bound to DNA, exhibits a DNA-dependent ATPase. In the absence of DNA, the rate of RecA protein-promoted ATP hydrolysis drops 1,000-fold under the physiological concentrations of salt. This DNA-independent activity can be stimulated to levels approximating those observed with DNA by adding high concentrations (approximately 1.6 M) of a wide variety of salts. This effect was characterized by varying salt concentration and comparing the effects of different ion types. The higher concentrations of salt stimulated the ATP hydrolysis by RecA protein in the absence of DNA. At 1.6 M chloride, the observed stimulation showed the following cation trend $K^+{\geq}Na^+$ > $NH_4^+$ and the following anion sequence was observed: $glutamate^- \; > \; C1^- \;> \; acetate^-\; > \;PO_4^-$ at 1.6 M $K^+$. The catalytic properties of the salt-stimulated ATP hydrolysis reaction was optimal between pH 7.0 and 8.0, which was similar to the double stran nded DNA-dependent ATPase activities of Deinococcus radiodurans RecA protein. In the absence of DNA the active species for ATP hydrolysis by RecA protein was shown to be an aggregate of three RecA protein molecules.

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.4
• /
• pp.414-421
• /
• 2024

In this paper, we design and verify a system that can detect piping leakage noise in an environment with significant reverberation and reflection using a multi-channel acoustic sensor module as a technology to prevent major plant accidents caused by leakage. Four-channel microphones arranged in a tetrahedron are designed as a single sensor module to measure three-dimensional sound intensity vectors. In an environment with large effects of reverberation and reflection, the measurement error of each sensor module increases on average, so after placing multiple sensor modules in the field, measurement results showing locations with large errors due to effects such as reflection are excluded. Using the intersection between three-dimensional vectors obtained from several pairs of sensor modules, the coordinates where the sound source is located are estimated, and outliers (e.g., positions estimated to be outside the site, positions estimated to be far from the average position) are detected and excluded among the points. For achieving aforementioned goal, an excluding algorithm by deciding the outliers among the estimated positions was proposed. By visualizing the estimated location coordinates of the leakage sound on the site drawing within 1 second, we construct and verify a system that can detect the location of the leakage sound in real time and enable immediate response. This study is expected to contribute to improving accident response capabilities and ensuring safety in large plants.

• Korean Journal of Food Science and Technology
• /
• v.41 no.1
• /
• pp.106-110
• /
• 2009

In order to reduce the bitter taste and improve the bioavailability of red ginseng extract(RGE), inclusion complexes (RGE-CD) of the extract with ${\alpha}-,\;{\beta}-,\;{\gamma}$-cyclodextrin were prepared and studied for their sensory quality and bioavailability compared to RGE. By complexation, the bitter taste-reducing efficacies of ${\alpha}$-CD and ${\beta}$-CD were much lower than that of ${\gamma}$-CD. In comparative sensory analysis for the bitter taste, RGE-${\gamma}$-CD10, prepared using 10%(w/w) of ${\gamma}$-CD, showed a score of 1.93(decreased by about 78%) compared to RGE as the control. In addition, in sensory analysis for flavor, RGE-${\gamma}$-CD10showed a score of 5.60. Upon increasing the amount of ${\gamma}$-CD to 15%(w/w) and 20%(w/w), respectively, the bitter taste of RGE-${\gamma}$-CD was removed and the flavor of RGE disappeared(scores of 2.67 and 1.67, respectively). Therefore RGE-${\gamma}$-CD10 was chosen as an optimum. The same dosages of RGE and RGE-${\gamma}$-CD10 were orally administered to SD(Sprague-Dawley) rats on a saponin basis, and the plasma concentrations of ginsenoside Rg1 and Rb1 were measured over time to estimate the average AUC(area under the plasma concentration versus time curve) of the ginsenosides. After the oral administration, there were no significant differences in the AUC values of the RGE and RGE-${\gamma}$-CD 10 groups for ginsenoside Rg1. However, AUC values for ginsenoside Rb1 were $25.8{\mu}g{\cdot}hr/mL$ in the RGE group and $81.5{\mu}g{\cdot}hr/mL$ in the RGE-${\gamma}$-CD 10 group, respectively. Therefore, the bioavailability of ginsenoside Rb1 in the RGE-${\gamma}$-CD 10 group was significantly higher by up to 315% compared with that in the RGE group(p = 0.0029). These results show that the bitter taste of RGE can be simultaneously removed by the complexation of RGE and ${\gamma}$-CD(RGE-${\gamma}$-CD) along with increased bioavailability.