• 패션비즈니스
• /
• 제15권5호
• /
• pp.103-114
• /
• 2011

During a wearer's movement, the apparel fabric layers collide each other in a highly complicated manner. The collision involves cloth-cloth, and cloth-body collision. The diversity of the textile fabrics, including silk, wool, cotton, and other synthetic fibers, together with the complex details of the apparel construction, makes the collision and other calculation procedure involved in the 3-dimensional clothing software system much more complicated. Therefore, there is a need to measure the behavior of the fabrics during the fabric collision cycles. In this study, as a first step, static measurements pertinent to the factors governing the appearance of the apparel fabrics were implemented. The drape profile, stiffness(Sd and Sf), tensile properties, thickness, and the air permeability were measured. The correlation between the parameters were calculated and reviewed. It is found that there is a high correlation of 0.97 between the actual fabric drape parameters and the 3D virtual fabric drape parameters. The measured drape coefficients of the fabrics show relatively good correlation with the measured fabric stiffness.

• 문화기술의 융합
• /
• 제9권3호
• /
• pp.407-413
• /
• 2023

본 연구는 디지털 패션디자인 영역이 확장되고 있는 현시점에서 자수 특유의 시각적 표현효과를 보다 쉽고 다양하게 의복 디자인에 접목할 수 있는 기초자료를 제공하고자 자수 디자인의 디지털화에 의한 시각적 표현 효과가 실제 의상과 가상의상에서도 동일한 효과를 나타내는지 비교하였다. 컴퓨터 자수기를 이용한 실제 자수 모티브와 디지털화에 의한 DTP 자수 모티브, 디지털 모티브를 생성하였으며 의복에서의 시각적 표현효과를 비교하고자 각각의 자수 모티브가 들어간 패치포켓 형태의 T-셔츠를 제작하였다. 자수기로 제작한 자수가 삽입된 의복과 디지털화된 자수 모티브를 디지털텍스타일프린팅하여 제작된 의복의 시각적 효과를 비교한 결과, 색상(3.5), 질감(4.0), 광택(3.8), 두께(3.5)에서 자수원사의 컬러와 두께감 등 시각적으로 충분히 자수의 질감, 광택의 표현 효과를 나타낼 수 있음을 알 수 있었다. 가상의복의 자수 표현효과에 있어서도, 색상(3.8), 질감(4.3), 광택(3.9), 두께(3.6)의 높은 일치도를 보여, 우리는 디지털화된 자수모티브도 기존 자수 특유의 시각적 표현 효과를 충분히 구현할 수 있는 도구임을 확인할 수 있었다.

• 패션비즈니스
• /
• 제25권5호
• /
• pp.73-87
• /
• 2021

This study aimed to develop fashion designs by applying the PO (Provocative Operation) method as a 3D virtual clothing program and to derive the PO application method in fashion design. The first T-shirt design was presented as an existing thinking method, and the second design was developed by applying escape, reversal, exaggeration, distortion, and hopeful thinking techniques, which are techniques for 'provocation' of the PO method, to the first design. Thus, 18 T-shirt designs were developed as 3D virtual clothing, with 3 sets of 6 designs, including the 1st and 2nd designs. The method of using the 'provocation' techniques of the PO method in the development of fashion design derived from this was as follows. First, the 'escape' technique was designed in such a way that a part of the detail or structure was deleted, or a part of the structure or expression element of another item was applied. Second, the 'inversion' technique was expressed by inverting the position or shape of a detail or structure up, down, left, and right; fitting the structural detail or reversing the shape; or converting the structure and form. Third, the 'exaggeration' technique exaggerated the size, length, and volume of a structure's form or detail. Fourth, the 'distortion' technique was expressed as a distortion of lines or shapes or a visual distortion using the Trompe l'oeil technique. Fifth, the 'hopeful thinking' technique was developed and expressed from the idea of an hypothetical 'if' it was absurd, irrational, and unrealistic.

• 한국의상디자인학회지
• /
• 제23권3호
• /
• pp.1-10
• /
• 2021

Harnesses are used in a variety of industries, such as rescue operations, medicine, and entertainment. However, conventional harnesses have problems as they are uncomfortable to wear and causes continuous pain. Therefore, in this study, the load and pressure applied to the body in the flying state when using a conventional harness were measured in real time and the distribution change was observed. Load and pressure were measured using a modified corset harness, a pressure sensor, and a human mannequin to measure the maximum and average pressure on the waist. As a result, it was confirmed that the load concentrated on the waist in the flying state was 104 N, and the pressure was applied to the left and right sides was 800 kPa or greater. The pressure distribution showed a pressure of 3-45 kPa in 73% in all measurable pressures. The results of the load and pressure distribution are presented as basic data for improving the wearability and reducing the discomfort of harnesses in the future, aid in the development of a harnesses that can minimize discomfort for various activities, and increase the concentration on experiential activities. In addition, using the CLO 3D program, which is a 3D virtual wearing system, a harness was put on a virtual model, and the compression level was checked and compared with the actual pressure distribution. As a result of comparing the measured pressure values in the flying state with the clothing pressure wearing the harness in the CLO 3D program, the total pressure value was found to be about 68% of the actual measured value. This helps develop a harness that can minimize discomfort during activities by predicting the load and pressure on the body by first applying new designs to a virtual wearing system during development. These new harness patterns can solve the problems of conventional harnesses.

• 한국의상디자인학회지
• /
• 제24권2호
• /
• pp.131-146
• /
• 2022

The purpose of this study is to implement the textile design applying the floral pattern shown in Korean traditional fabrics and the New-Hanbok Chulic Dress in 3D through a virtual fitting system. As a research method, first, we analyzed the floral pattern types of fabrics in the literature related to traditional Korean textiles. Second, we developed textile designs of traditional flower motifs using 13 extracted flower types. Third, we applied the floral textile designs to the 3D original form of new-Hanbok Dress produced based on design preference survey results. The findings derived through this study are as follows. First, among Korean traditional patterns, the type of flowers used in textiles were blossom of chrysanthemum, orchid, camellia, apricot, peony, peach, pomegranate, hydrangea, narcissus, lotus, plum, chinese rose, and rosa rugosa. Second, this study found that the value of traditional culture can be further increased by using traditional flower patterns as an infinite source of creative design. Third, it was confirmed that the new-Hanbok can be developed endlessly as a clothing design that combines various morphological modifications and patterns without departing from traditional designs. In the future, if the research on costume design using various items of traditional clothing and the development of textile designs based on traditional culture continues, the development of new clothes design that leads to the development of Korean traditional clothing culture and meets the sensibilities of modern people will be endless.

• 한국의류산업학회지
• /
• 제15권2호
• /
• pp.247-255
• /
• 2013

This study develops size sections and specifications for females 7-18 years old. The specifications will contribute to the development of precise virtual models that represent basic data for the size alteration of 3D virtual models. A total of 33 items from the $5^{th}$ Size Korea data set were adopted and analyzed. Two representative factors (Obesity and Height Factors) were identified through a factor analysis of the 33 items. Waist circumference and stature were selected as representative variables for Obesity and Height Factors, respectively, and conducted cross tabulations between waist circumference and height for the age groups of 7-12 and 13-18 year-olds. Size sections were developed for the development of 3D models based on the results. A regression analysis then developed size specifications for each section with independent variables of waist circumference and height as well as dependent variables of reference body size. Subsequently, Obesity Factors were better explained by waist circumference and Height Factors were better explained by stature. Finally, size specifications for each section were developed.

• 한국의상디자인학회지
• /
• 제25권4호
• /
• pp.147-161
• /
• 2023

This study used 3D anthropometric data from the 8th Size Korea to type and analyze whole body shapes of obese women in their 20s and 30s, and constructed dimensional data for human body items needed to create a 3D human body model for each type. The data analysis used data from 148 obese women in their 20s and 30s, and a total of 48 index values, drop values, and angle items were subjected to factor analysis and one-way variance analysis to categorize body types and verify significant differences by type. As a result of the factor analysis, 12 factors were extracted and divided into 4 body types. Type 1 is a 'standard type with a curved torso with balanced upper and lower body lengths', Type 2 is a 'bending forward type with a short, thick lower body, and an uncurved torso', Type 3 is a 'lean back type with a long and thin lower body and an H-shape torso', Type 4 is a 'sway back type with a long and thick lower body and abdominal obesity'. The representative body type of obese women in their 20s and 30s was identified as Type 1. The constructed body shape information will be used as basic data for future 3D human body modeling.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2012년도 추계학술대회
• /
• pp.355-356
• /
• 2012

최근에는 패션 분야에서는 컴퓨터 그래픽을 이용하여 의상을 재현하는 디지털 클로딩 기술이 활성화되고 있고, 패션의 흐름을 3D 기술과 접목하려는 연구가 많이 진행되고 있다. 패션산업에서 스마트폰을 이용하여 트렌드 변화를 정확하게 파악하여 감성적인 요인들을 추가시켜야 성공적인 패션산업을 이룰 수 있다. 기존의 3D 피팅 서비스는 아바타나 가상 거울이 설치된 매장이나 인터넷 사이트에서 가능하였다. 본 논문에서는 아이폰을 이용하여 소비자 입장에서 시간적, 체력적 소모가 줄일 수 있는 패션 피팅 서비스 시스템을 제안한다. 본 시스템은 기업측면에서는 마케팅을 쉽게 할 수 있고, 소비자는 제품을 다양하게 선택하여 어울림을 확인하였다.

• 한국의류산업학회지
• /
• 제23권4호
• /
• pp.504-514
• /
• 2021

This study attempted to extract and structure the job skills required for 3D designers, which have been recently introduced to the fashion industry. The study aimed to materialize and objectify the 3D designer's job, using a focus group interview for the survey. The 3D designer has the TD task of making 3D virtual samples using the pattern files developed in Pattern CAD. Graphic design and fabric digitization are also major tasks for the 3D designer. CLO is mainly used for 3D virtual sample production, and PixPlant, Substance, Photoshop, Cinema 4D, Daz studio, and 3ds MAX are used for image and avatar editing. As per the job skills required for 3D design work, basic knowledge about patterns and sewing, skill in 3D virtual clothing technology, ability to use various software, and English skills were considered important, in that order. In particular, the need for knowledge about patterns and sewing became more important than the skill in 3D virtual clothing technology itself. To train 3D designers, it was found that not only 3D virtual clothing software, but also education on patterns and clothing construction, CAD developer's curriculum certification system, and 3D designer qualification management were required. In addition, 3D designers are recognized as an essential job in fashion vendors, and the demand for domestic brands is increasing. The biggest limitation of the 3D virtual clothing system is the perfection of the digital fabric. Also, technical improvement is needed.

• 감성과학
• /
• 제14권1호
• /
• pp.39-48
• /
• 2011

3D스캔-인체 및 의복 모델링-시뮬레이션-패턴 제작 및 검증의 전체 3D 의복제작 프로세스를 원활히 활용할 수 있도록 하기 위하여 3D 그래픽과 CAD 시스템 그리고 3D-2D 직접 패턴 전개 시스템을 이용해야 하는 데 이 때 장애가 되는 것은 3D 시뮬레이션한 가상의복으로부터 정확한 패턴을 추출하는 것이 어렵고, 전반적 과정의 호환이 쉽지 않다는 것이다. 이에 본 연구에서는 인체에 정확히 밀착된 부분과 드레이프가 있는 비대칭형 드레스를 대상으로 전체 프로세스를 원활하게 구동할 수 있는 방법을 모색하였다. 연구 방법으로는 3D 스캔 데이터를 이용하여 Maya로 범용성 3D 인체 모델을 만들고 이 3D 바디 모델에 맞는 3D 드레스를 디자인하고 모델링한 후, Rapidform, 2C-AN 프로그램과 YukaCAD를 이용하여 정확한 2D 패턴을 제작하는 과정의 호환성을 해결하며 진행하였다. 이 과정에서 도출한 패턴을 실제 의상으로 제작하여 착의 시킨 후 3D 의복 모델과의 여유분 분포를 3차원 측정 기술로 검증하였고 실물 드레스의 드레이프의 모양과 시뮬레이트된 드레스의 모양을 검토하였다. 그 결과 제시한 방법을 활용하면 전반적으로 만족스럽게 정량적인 3D 의복 제작 프로세스를 운영할 수 있음을 확인하였다.