• Science of Emotion and Sensibility
• /
• v.14 no.1
• /
• pp.39-48
• /
• 2011

There still is a limitation in the usage of 3D clothes model in the production line due to the lack of compatibility between 3D modeling software, and its accurate 2D pattern making software, especially for free formed dress with tight fitted zone and draped part. In this study, obstacles in the 3D direct dress design process was overcome by solving the compatibility among each step of 3D virtual design process as well as adopting 3D-2D direct pattern development program called 2C-AN. Efficacy of making 2D pattern from 3D dress design using 2C-AN program developed by the authors was examined during the course of actual dress making process. Accurate ease over the fitted dress part was examined by 3D scanning technology, and the actual appearance of the draped part was compared with the simulation image of dress model. It was confirmed that the entire 3D design process and direct 2D pattern development proposed in this study was accurate enough to use in the 3D design process.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.04a
• /
• pp.1037-1038
• /
• 2017

최근 급성장하는 로봇의 발달과 생체인식의 개발에 따라 패턴 인식기술 또한 급속히 발전하고 있으며, 그 범위가 2D에서 3D까지로 확장되고 있다. 3D 패턴인식은 기존 2D 패턴인식의 문제점을 해결하여 여러 각도에서는 인식되지 못했던 물체와 생체를 3D적으로 인식한다. 본 논문에서는 다양한 종류의 3D 패턴인식을 이용한 기술 현황을 알아본 후 그 전망을 소개한다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2001.06a
• /
• pp.185-188
• /
• 2001

본 논문에서는 의복의 2D패턴을 구성하여, 3D모델을 자동생성하는 방법을 제안한다. 먼저, 의복의 2D CAB 패턴으로부터 여러가지 의복 2D모델을 자동생성한 후, 의복 패턴별 2D모델을 붕합(Seaming)하여 3D모델을 생성한다. 봉합과정에서 B-Spline을 이용하여 인체의 굴곡과 의복의 공극을 고려하여 의복착용 후의 3D모델을 재구성하고, Z-buffer를 개량한 저리버퍼를 사용한 선적분을 통하여 3D모델을 구성하고 있다. 이때 의복의 3D 모델의 구조에 따라 부분적으로 의복 표면의 인체가 노출되는 현상을 검색하여( Collision Detection ), 의복 3D 모델을 부분적으로 수정하고 있다. 나아가서, 의복 원단에 대한 텍스처DB를 구축하여 다양한 색상의 의복을 코디할 수 있다.

• The Journal of the Korea Contents Association
• /
• v.10 no.8
• /
• pp.66-72
• /
• 2010

This paper is focus on 3D virtual building design technic that construction materials are showed by components and these components are part of patterns, and building design using pattern is possible. To use this technique in process of construction, design, analysis, change, assembly, etc, we will develop flexible building design system that it supports efficient building change and low cost by construction design simulation. Specially also the designer and the user use a pattern and easily will be able to change the building and according to change pattern information of the materials, design of the buildings which are changed creates automatic. Also we will implement knowledge retrieval engine which is necessary to personal skill or visualization.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.512-519
• /
• 2012

This paper proposes a 3-D pose (positions and orientations) estimation system based on the recognition of circular ring patterns. To deal with monocular vision-based pose estimation problem, we specially design a circular ring pattern that has a simplicity merit in view of object recognition. A pose estimation procedure is described in detail, which utilizes the geometric transformation of a circular ring pattern in 2-D perspective projection space. The proposed method is evaluated through the analysis of accuracy and precision with respect to 3-D pose estimation of a quadrotor-type vehicle in 3-D space.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.5
• /
• pp.871-876
• /
• 2006

In this thesis, to accurately measure 3D face information using the spatial encoding patterns, the new algorithm to segment the pattern images from initial face pattern image is proposed. If the obtained images is non-homogeneous texture and ambiguous boundary pattern, the pattern segmentation is very difficult. Furthermore. the non-encoded areas by accumulated error are occurred. In this thesis, the FCM(fuzzy c-means) clustering method is proposed to enhance the robust encoding and segmentation rate under non-homogeneous texture and ambiguous boundary pattern. The initial parameters for experiment such as clustering class number, maximum repetition number, and error tolerance are set with 2, 100, 0.0001 respectively. The proposed pattern segmentation method increased 8-20% segmentation rate with conventional binary segmentation methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4C
• /
• pp.381-390
• /
• 2006

This paper proposes a new technque of the camera calibration to be computed a homography between the planar patterns taken by a single image to be located at the three planar patterns from uncalibrated images. It is essential to calibrate a camera for 3-dimensional reconstruction from uncalibrated image. Since the proposed method should be computed from the homography among the three planar patterns from a single image, it is implemented to more easily and simply to recover 3D reconstruction of an object than the conventional. Experimental results show the performances of the proposed method are the better than the conventional. We demonstrate examples of recovering 3D reconstruction using the proposed algorithm from uncalibrated images.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.6
• /
• pp.143-154
• /
• 2020

In this study, four types of bodice patterns of elderly males in their 70s and 80s were made, and appearance evaluation was conducted through 3D simulation. For objective evaluation, airgap, cross section, color distribution, etc. were analyzed to compare differences between patterns. The pattern shape of bodice for elderly males was a pattern without darts except for the L pattern. As a result of appearance evaluation for 3D simulation, the elderly males' pattern was found to have a significant difference among the patterns on the front, side, and back items, and the H pattern was analyzed as the best pattern in all items except the armhole shape on the side. As a result of evaluating the airgap, color distribution, and cross-section, the most suitable pattern for the elderly male's body type was analyzed as the H pattern. Based on the H pattern, it is thought that the development of a pattern suitable for the upper body shape of elderly male should be made.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2014.06a
• /
• pp.79-80
• /
• 2014

본 논문에서는 다방향 패턴을 이용한 구조광(structured light)방식의 3차원 스캔 기법을 적용하여 3차원 스캐너의 3차원 형상 취득의 정밀도를 높이는 방법을 제안한다. 기존의 단방향 패턴을 이용한 3차원 구조광 방식의 스캔 기법으로 3차원 형상을 취득하는 경우, 스캔 대상 표면의 법선벡터가 패턴의 방향과 수평 할수록 부정확한 형상이 복원된다. 본 논문에서는 스캔 대상의 경사면에 따른 법선 벡터(normal vector) 검출 및 검출된 벡터를 통한 최적의 패턴 방향 선출(quantization), 그리고 각 화소의 최적의 패턴방향을 이용한 선별적인 구조광 방식의 3차원 스캔 기법을 통하여 3차원 형상 취득의 정확성을 높이는 기법을 제안한다.

• Journal of Music and Human Behavior
• /
• v.13 no.2
• /
• pp.67-83
• /
• 2016

This study investigated the tonal characteristics in Korean emotion words by analyzing the pitch patterns transformed from word utterance. Participants were 30 women, ages 19-23. Each participant was instructed to talk about their emotional experiences using 4-syllable target words. A total of 180 utterances were analyzed in terms of the frequency of each syllable using the Praat. The data were transformed into meantones based on the semi-tone scale. When emotion words were used in the middle of a sentence, the pitch pattern was transformed to A3-A3-G3-G3 for '즐거워서(joyful)', C4-D4-B3-A3 for '행복해서(happy)', G3-A3-G3-G3 for '억울해서(resentful)', A3-A3-G3-A3 for '불안해서(anxious)', and C4-C4-A3-G3 for '침울해서(frustrated)'. When the emotion words were used at the end of a sentence, the pitch pattern was transformed to G4-G4-F4-F4 for '즐거워요(joyful)', D4-D4-A3-G3 for '행복해요(happy)', G3-G3-G3-A3 and F3-G3-E3-D3 for '억울해요(resentful)', A3-G3-F3-F3 for '불안해요(anxious)', and A3-A3-F3-F3 for '침울해요(frustrated)'. These results indicate the differences in pitch patterns depending on the conveyed emotions and the position of words in a sentence. This study presents the baseline data on the tonal characteristics of emotion words, thereby suggesting how pitch patterns could be utilized when creating a melody during songwriting for emotional expression.