• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2008.11a
• /
• pp.297-300
• /
• 2008

Since the Three Dimensional Computer Aided Design(3D CAD) appeared in 1990s, Building Information Modeling(BIM) has got the great issue in the construction project nowadays. BIM is the process of managing and generating building information during life cycle of a construction project. And information can be moved to 3D modeling flexibly in BIM. As a result, a field of estimating has also been doing researches in the calculation of the amount of building materials from 3D modeling. And the Construction Cost Estimating Software which is generally used over the world has been trying to be applied to the Construction project in Korea. But, when we consider the productivity, it is less efficient than the existing way in Korea which use the 2D Drawings when they take off the Quantity. Also, there are lots of difference how to estimate the construction cost. between Korea and the others. Because it is a bit hard to apply the software used in the other countries to the construction project in Korea, people couldn't use it well in the construction project actually. In this study, for developing the appropriate construction cost estimating software rooted in 3D in Korea, we suggest 3D CAD Add-on Program for a Quantity Take-off which can move quantitative information to 3D CAD.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.5
• /
• pp.74-83
• /
• 2013

Most current BIM systems are focused on the visual information of work status in the design and construction stages. In a passive BIM system, 3D CAD tool can visualize the interference elements of design drawings, however, it cannot suggest a solution to solve the interference status. And 4D CAD tool in the construction stage can simulate the appearance of each activity by construction schedule, however, it cannot suggest an optimized schedule plan considering specified schedule condition of the project. Recently, many organizations need BIM solutions that can improve the work status beyond the level of simple visual information from BIM system. Active BIM system can provide the solutions to the project manager. This study suggests active BIM functions for the solutions and attempts to develop a 4D CAD engine to validate the usability of the functions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.12
• /
• pp.1694-1700
• /
• 2002

본 연구는 염색 과정 중에 발생하는 수질오염을 줄이고 또한 홀치기 염색기법에 의해 제작된 패턴을 모티브로 하여 수작업에서 얻지 못한 다색 의 사용을 가능케 함으로써 새로운 느낌 의 홀치기 문양 표현과 3D 모델링을 통하여 텍스타일디자인이 상품화 되었을 때의 효과를 CAD를 이용하여 살펴보고자 한 것이다. 연구방법으로는 가장 일반적인 실로 묶기, 전통적인 손바느질 느낌이 나는 시침질, 현대적 느낌이 강한 깡통에 의한 묶기와 기하학적 효과가 나는 접기 등의 홀치기염색 기법으로 수작업 한 다음 CAD를 이용하였다 연구의 결과는 다음과 같다. 첫째, 홀치기염색기법에 의해 제작된 패턴을 모티브로 하여 수작업에서 얻지 못하는 다색사용가능성이 주메뉴의 색정리, 색4전개, 색 바꾸기를 사용함으로써 가능하였다 둘째, 다양한 색을 얻기 위해서 홀치기염색의 수작업에서는 상당한 시간과 노력을 필요로 하지 만 CAD를 사용함으로써 이러한 작업 이 몇 가지 메뉴의 사용으로 짧은 시간 내에 쉽게 이루어질 수 있었다. 셋째, CAD를 통한 홀치기 염색패턴의 새로운 이미지 효과를 얻기 위해 Solarize와 Intensity Direct, Effect/Emboss를 사용함으로써 다양한 질감과 새로운 이 미지 의 홀치기염색패턴을 얻을 수 있었다. 넷째, 위의 작업 과정을 통하여 수작업에서 발생 하는 수질오염을 줄일 수 있었다. 다섯째, 이상에서 얻어진 염색패턴을 3D모델링을 통하여 상품의 제작과정과 소비자에게 착용되었을 때의 효과를 미리 볼 수 있음으로 인해서 생산자의 실패율을 줄여줄 수 있을 것으로 본다 여섯째, CAD를 이용한 이러한 일련의 과정들이 텍스타일산업 분야에 충분히 기여 할 수 있을 것으로 기대 된다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.7
• /
• pp.1111-1125
• /
• 2010

Study is a basic analysis of a future virtual clothing system based on a comparative analysis of all the shirring, using a 3-dimensional apparel cad system. Frilled skirts shirred at the lower hemline were the subject of this study for a comparison of expression and shape of shirring. It compared the silhouette and details expressed in virtual and real skirts made of woolen fabrics and polyester satin, with different widths (1.5, 2 and 2.5 widths). It was found that the virtual skirt could not express shirring as exquisitely as the real skirt due to fabric thickness and other fabric characteristics. In addition, the increase in widths caused the frill shape to deform badly. In the case of a virtual skirt made of polyester satin, the increased multiplication factor let the frill spread out sharply (unlike the real skirt). Simulated skirts of polyester satin and woolen spread out to the sides with the sidelines of their frills hanging down markedly (unlike the real cloths) when the frills changed from 1.5 widths to 2 widths. When it came to the virtual skirt, side-line from the hip down all the way short of frill contorted with the wrinkle multiplication factor of 2 and 2.5 widths. This phenomenon was more notable in polyester satin skirts than in woolen skirts.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.10
• /
• pp.1627-1635
• /
• 2001

Virtual manufacturing is a technology facilitating effective development and agile manufacturing of products via sophisticated computer models representing physical and logical schema and behavior of real manufacturing systems including manufacturing resources, environments, and products. For the successful application of this technology, a virtual plant as a well-designed and integrated environment is essential fur sharing information and engineering collaboration among diverse engineering activities. The systematic approaches and effective methods for construction and application of a virtual plant are proposed in this paper, such as a 3-D CAD modeling, cell and line simulations, databases and some information technologies. Measuring and 3-D CAD modeling technologies of many equipments, facilities and structures of the building are developed, and effective information management system managing CAD models, related files and data is implemented in WWW environments. Finally, precise simulations of unit cell lines and the whole plant are performed. For the beginning of implementing a Virtual Automotive Plant, the Virtual Plant fur the Body Shop of a Korean automotive company is constructed and implemented. We could obtain the benefit of savings in time and cost in many manufacturing preparation activities in the new car development processes.

• Journal of Technologic Dentistry
• /
• v.39 no.1
• /
• pp.1-7
• /
• 2017

Purpose: The purpose of this in vitro study compared to evaluation of repeatability of scanning abutment tooth stone model and impression applied CAD/CAM ISO standard in dentistry. Methods: To evaluate repeatability of scanning abutment tooth stone model, were repeatedly scanned to obtain 11 data via 3D stereolithography (STL) files. 10 data (STL files) were compared with the first 3D data (STL file), and the error sizes were measured by using 3D superimposing software(n=10). Also, the repeatability of scanning abutment tooth impression was evaluated with the same procedure. Independent t test was performed to evaluate the repeatability of scanning abutment tooth stone model versus impression through root mean square(RMS) and standard deviation(SD)(${\alpha}=0.05$). Results: $RMS{\pm}SD$ with regard to repeatability were $14.7{\pm}2.5{\mu}m$, $17.1{\pm}4.0{\mu}m$, respectively, with scanning abutment tooth stone model and impression(p=0.129). Conclusion: This study results showed a little different repeatability of scanning abutment tooth stone model and impression applied CAD/CAM ISO standard in dentistry, will suggest futures good studies and clinical advantages.

• Fashion & Textile Research Journal
• /
• v.26 no.1
• /
• pp.65-77
• /
• 2024

This study aimed to propose effective ways to integrate CLO into educational settings by conducting a comparative analysis of pattern functions in YUKA and CLO, specifically focusing on skirt prototypes and variations. CLO, being a 3D virtual sample CAD tool, is mainly used in education to facilitate the creation of 3D virtual clothing. In order to explore the applicability of CLO's pattern functions in pattern education, CAD education experts were asked to produce two types of skirt prototypes and two skirt variations. Subsequently, in-depth interviews were conducted. In addition, the skirt pattern creation process was recorded on video and used for comparative analysis of YUKA and CLO pattern functions. The comparison revealed that CLO provides the pattern tools necessary for drafting skirt prototypes. The learning curve for acquiring the skills necessary for drafting and transforming skirt prototypes was found to be relatively shorter for CLO compared to YUKA. In addition, due to CLO's surface-based pattern drawing method, it is difficult to move or copy only specific parts of the outline, and there are some limitations in drawing right angle lines. In the pattern transformation process, CLO's preview function proved to be advantageous, and it was highly rated on user convenience due to the intuitive UI. Thus, CLO shows promise for pattern drafting education and is deemed to have high scalability as it is directly linked to 3D virtual clothing.

• Archives of design research
• /
• v.14
• /
• pp.109-119
• /
• 1996

One of the most important factors in the work environment of the industrial design is the design process which can systematically synthesize the informations of related fields. Because the computer technology is being radically developed, industrial should not only positively be able to cope with new technologies, but also should positively be able to take part in the development of the integrated system for the process by the new technologies. Recently in the industrial design field, designers are often using the computer~applied-3D modeling techniques in the development process of industrial design products, especially in the visualization level of the design development. In this paper, we studied the workstation modeling process to understand the computer~applied-3D modeling and presented the methods of transfer of the 3D-modeling data of a workstation(SGI) to the AutoCAD data of a personal computer which is generally being used as a drawing tool in mechanism parts. Through the development process of an electronic taxi meter as a practical case study, we check the possibility whether the 3D-modeling data transferred from an industrial design part to a mechanism part can directly be used as the mechanism data. For this, we transferred the 3D-modeling data of an electronic taxi meter created with a workstation(SGI) to the AutoCAD data of a personal computer and checked the usefulness of data transferred from an industrial design part to a mechanism part. Through these processes of data transfer, we aimed to find out the basic principles which can be rationally applied to a mechanism part or a production part.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.4
• /
• pp.57-66
• /
• 2011

The advent of BIM(Building Information Modeling) design process based on the digital media has brought innovation to the production and management of AEC industry. Accordingly the need for educating BIM professionals has been radically increased both in the real world practice and in academia. Some developed countries have already been studying and establishing the optimized curriculum in the academic architecture courses for BIM based education with multi_efforts using the digital media as design processing tools focused on educating architectural professionals with creativity and productivity. However in the domestic education systems, it is hardly found that researches and curriculums deal with the BIM education in the academia. Thus the objective of this paper is to investigate the architectural design pedagogy in the advanced digital media setting in response to the urgent need for BIM education. This study focuses on developing the curriculum based on practical adaptation of BIM programs for architectural education. It aims to provide students with the basic understanding of BIM theory and the practice of BIM tools as an instrument enhancing the creativity for architectural design. Thus this study proposes an BIM curriculum for the students who first encounter the notion and knowledge of BIM during their academic years. And the education result after the application of this curriculum has been analysed through the students questionnaires before and after the lecture.

• The Journal of Korean Academy of Prosthodontics
• /
• v.61 no.4
• /
• pp.367-378
• /
• 2023

With the recent development of computer-aided design-computer-aided manufacturing technology and 3D printing technology, and the introduction of various digital techniques, the accuracy and efficiency of top-down definitive prosthetic restoration are increasing. In this clinical case, stable occlusion support was obtained through the placement of a total of 9 maxillary and mandibular posterior implants in patient with anterior-posterior crossed occlusion. The edentulous area of the maxillary anterior teeth, which showed a tendency of high resorption of the residual alveolar bone, was restored with a Kennedy Class IV implant assisted removable partial denture to restore soft tissue esthetics. Computed tomography guided surgery was used to place implants in the planned position, double scan technique was used to reflect the stabilized occlusion in the interim restoration stage to the definitive prostheses, and metal 3D printing was used to manufacture the coping and framework. This clinical case reports that efficient and predictable top-down full mouth rehabilitation was achieved using various digital technologies and techniques.