• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.1
• /
• pp.89-94
• /
• 1999

This experiment was carried out to determine harvest date and cultivar effects on growth characteristics, forage yield and quality of spring sown oats at the middle mountain(450m) area at the forage experimental field, Namweon Branch, National Livestock Research Institute. The experiment was arranged in a split plot design with three replication. The main plot consisted of the harvest date(9 June, 18 June). The subplots consisted of different maturities of oat cultivars such as Cayuse, Swan, Foothill, Cashel, Martlock and Winjardie. The results obtained are summarized as follows; A period of 50 days was required to be first headed from seeding with early maturity oats(Swan), but that of 77 days was required with late maturity(Foothill). The dry matter content of early maturity(Swan) oats at 9 June and 18 June were 24.01% and 35.69%, but that of late maturity cultivars(Foothill) were 14.02% and 22.84%. The fresh yield of late maturity(Foothill) oats at 9 June and 18 June were 62,666kg and 59,666kg, but that of early maturity(Cashel) were 54,222kg and 45,493kg(P<0.05). The dry yield of early maturity (Cashel) oats at 9 June was 10,169kg, but that of early maturity (Martlock) was 6,272kg. But no significant difference was found among cultivars at June 18. Crude protein content of oats were decreased from 14.0% to 11.1% as the growing stage progressed, ADF, NDF and CF contents were increased. And in vitro dry matter digestibility was decreased as the harvest date delayed. The present experiment indicated that spring sown oats(Foothill) can be successfully produced as fresh forage by seeding in middle March and harvesting in 10 and 20 June at the middle mountain (450m) area.

• The Journal of Korean society of community based occupational therapy
• /
• v.10 no.1
• /
• pp.51-61
• /
• 2020

Objectives : The purpose of this study is to investigate the effect of object size and reaching distance on kinematic factors of the upper limb while performing arm reaching for normal subjects. Methods : The subjects of this study were 30 university students who were in D university in Busan, and the measuring tool was CMS-70P(Zebris Medizintechnik Gmbh, Germany), a three-dimensional motion analyzer. The task had six conditions. The average velocity of motion, average acceleration, maximum velocity, and the velocity definite number of movements were measured according to changes in object size(2cm, 10cm) and reaching distance(15%, 37.5%, 60%) when they performed arm reaching. The general characteristics of the subject were technical statistics. One-way ANOVA measurement was used to compare variables when the arm reaching task was performed from two object sizes to three reaching distance, and the post-test was conducted with Tukey test. In addition, an independent t-test was used to analyze the kinematic differences according to the two object sizes at three reaching distances. A two-way ANOVA measurement (3×2 Two-way ANOVA measurement) was performed to identify the interaction of the reaching distance(15%, 37.5%, 60%) and the object size(2cm, 10cm). The statistical significance level α was set to .05. Results : When the size of the object increased, the velocity and maximum velocity also increased, but the definite number of velocity decreased. When the reaching distance increased, the velocity and maximum velocity increased, whereas the definite number of velocity decreased. Conclusion : The clinical significance of this study could be utilized as the baseline data for grading object size and reaching distances when the reaching training is implemented for patients whose central nervous system was damaged.

• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.528-536
• /
• 2016

This study was conducted to examine the effect of 0.4% of $CaCl_2$, $2H_2O$, $1mg{\cdot}L^{-1}$ of Calmodulin (CaM)-SH, 250-folds of coating agent (WE-36), 1,000-folds of $GA_{4+7}+BA$ and 3 types of paper bagging treatments on russet incidence and fruit quality attributes of 'Gamhong' apple. The pattern of russet occurrence was slightly different for 4 years (from 2012 to 2015) in 'Gamhong' apple. The russet occurrence was lowest in $GA_{4+7}+BA$ treatment at 20 days after full bloom (DAFB), compared with other treatments. The $GA_{4+7}+BA$ treatment increased fruit weight at 20 DAFB, while the other fruit quality attributes were not influenced. The russet occurrence was lower not only in a single bag application than in untreated ones but also in yellow bagging and discolored bagging applications than in a white bagging application. The russet occurrence in a bagging application was lower at 20 DAFB than at 30 and 40 DAFB, while fruit quality attributes were not affected by bagging applications. The russet incidence was lower in $GA_{4+7}+BA$ twice treatments at 20 and 30 DAFB, and calcium coated bag at 30 DAFB after $GA_{4+7}+BA$ treatment at 20 DAFB than in untreated fruit. The rate of russet incidence was lowest at equator region in $GA_{4+7}+BA$ treatment, compared with the other fruit regions. Overall, the results suggest that one and/or two applications of $GA_{4+7}+BA$ (1,000-folds) treatment at 20 DAFB should reduce the risk of russet incidence in 'Gamhong' fruit.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.273-279
• /
• 2010

Purpose: The purpose of this in vitro study was to compare the marginal adaptation of a ceramic-pressed-to-metal restoration with traditional metal-ceramic restoration. Materials and methods: Duplicating the prepared resin tooth, 20 metal dies were fabricated. Twenty metal copings of 2 groups which were metal ceramic restoration and pressed to metal restoration were fabricated. The marginal opening of each coping was measured with Microscope (BX 60M-36E $41D^{(R)}$: Olympus, Japan). After porcelain build-up, the marginal opening of metal ceramic restoration and pressed to metal restoration ($PoM^{(R)}$: Ivoclar vivadent., Liechtenstein) were also evaluated in the same method. The measurements were analyzed using Wilcoxon Signed Ranks test and Mann-Whitney U test. Results: Within the limits of this study, the results were as follows. 1. Metal-ceramic restorations in coping state ($64.93{\pm}12.48\;{\mu}m$) in compared with Metal ceramic restorations after porcelain build-up ($63.43{\pm}12.86\;{\mu}m$) had no significant difference in marginal adaptation. 2. Pressed-metal-ceramic restorations in coping state ($50.00{\pm}12.28\;{\mu}m$) in compared with Pressed metal ceramic restorations after porcelain build-up ($56.72{\pm}13.80\;{\mu}m$) had no significant difference in marginal adaptation. 3. Metal-ceramic restorations in compared Pressed-metal-ceramic restorations had no significant difference in marginal adaptation. Conclusion: Pressed-metal-ceramic restorations have the advantage of being technically less change through using of the lost-wax technique and this allows for the convenience of a full-contour ceramic wax-up as opposed to the more technique-sensitive layering method. Pressed-metal-ceramic restorations may be considered in clinic on the basis of the result of this study and the advantage of this system.

• Progress in Medical Physics
• /
• v.23 no.1
• /
• pp.8-14
• /
• 2012

In order to develop a Patient respiratory management system includinga biofeedback function for4-dimentional radiation therapy, this study investigated anoptimal tracking algorithmfor moving target using IR (Infra-red) camera as well as commercial camera. A tracking system was developed by LabVIEW 2010. Motion phantom images were acquired using a camera (IR or commercial). After image process were conducted to convert acquired image to binary image by applying a threshold values, several edge enhance methods such as Sobel, Prewitt, Differentiation, Sigma, Gradient, Roberts, were applied. The targetpattern was defined in the images, and acquired image from a moving targetwas tracked by matching pre-defined tracking pattern. During the matching of imagee, thecoordinateof tracking point was recorded. In order to assess the performance of tracking algorithm, the value of score which represents theaccuracy of pattern matching was defined. To compare the algorithm objectively, we repeat experiments 3 times for 5 minuts for each algorithm. Average valueand standard deviations (SD) of score were automatically calculatedsaved as ASCII format. Score of threshold only was 706, and standard deviation was 84. The value of average and SD for other algorithms which combined edge detection method and thresholdwere 794, 64 in Sobel, 770, 101 in Differentiation, 754, 85 in Gradient, 763, 75 in Prewitt, 777, 93 in Roberts, and 822, 62 in Sigma, respectively. According to score analysis, the most efficient tracking algorithm is the Sigma method. Therefore, 4-dimentional radiation threapy is expected tobemore efficient if threshold and Sigma edge detection method are used together in target tracking.

• Journal of Gastric Cancer
• /
• v.8 no.1
• /
• pp.27-34
• /
• 2008

Purpose: Many recent studies have reported on the feasibility and usefulness of laparoscopy assisted distal gastrectomy (LADG) for treating early gastric cancer. On the other hand, there has been few reports about laparoscopy assisted total gastrectomy (LATG) because upper located gastric cancer is relatively rare and the surgical technique is more difficult than that for LADG, We now present our procedure and results of performing LATG for the gastric cancer located in the upper or middle portion of the stomach. Materials and Methods: From Jan 2005 to Sep 2007, 96 patients underwent LATG by four surgeons at the Asan Medical Center, Seoul, Korea. Among them, 48 consecutive patients who were operated on by asingle surgeon were analyzed with respect to the clinicopathological features, the surgical results and the postoperative courses with using the prospectively collected laparoscopy surgery data. Results: There was no conversion to open surgery during LATG. For all the reconstructions, Roux-en Y esophago-jejunostomy and D1+beta lymphadenectomy were the standard procedures. The mean operation time was $212{\pm}67$ minutes. The mean total number of retrieved lymph nodes was $28.9{\pm}10.54$ (range: $12{\sim}64$) and all the patients had a clear proximal resection margin in their final pathologic reports. The mean time to passing gas, first oral feeding and discharge from the hospital was 2.98, 3.67 and 7.08 days, respectively. There were 5 surgical complications and 2 non-surgical complications for 5 (10.4%) patients, and there was no mortality. None of the patients needed operation because of complications and they recovered with conservative treatments. The mean operation time remained constant after 20 cases and so a learning curve was present. The morbidity rate was not different between the two periods, but the postoperative course was significantly better after the learning curve. Analysis of the factors contributing to the postoperative morbidity, with using logistic regression analysis, showed that the 8MI is the only contributing factor forpostoperative complications (P=0.029, HR=2.513, 95% CI=1.097-5.755). Conclusions: LATG with regional lymph node dissection for upper and middle early gastric cancer is considered to be a safe, feasible method that showed an excellent postoperative course and acceptable morbidity. BMI should be considered in the patient selection at the beginning period because of the impact of the BMI on the postoperative morbidity.

• Archives of design research
• /
• v.17 no.4
• /
• pp.241-250
• /
• 2004

In this research, the copper alloy plates C2200, C5210, C7701, C8113 were selected to make datum and to identify further usage of metal craft experimentation. For its experimentation, the general welding and TIG welding methods were researched; for 2nd experimentation, the Reticulation and Electroforming skill's differences in color and temperature were researched. With these methods 3 different kinds of works are introduced for sample studies. For this research, Dr. Lee, Dong-Woo who works in Poongsan Metal Co, supported 4 kinds of copper alloy metals. Which are Commercial bronze (Cu-Zn), Deoxidiged Copper(Cu-Sn-P), Nickel Silver (Cu-Ni-Zn), and White Bronze (Cu-Ni); they were applied partly and wholly by the method of Laminatin, Reticulation, Fusing, and Electroforming skills. In case of C2200, the brass, the A. C. TIG welding method is better under 2mm slight plate; the D.C. TIG welding is better upper 2mm plate; and 250~300$^{\circ}C$ is recommended for remain heat treatment. In case of C5210, not having Hydrogen in high temperature return period, doesn't need Oxygen in high temperature and hardening in comparative high temperature neither, it is good for welding. It contains Sn 2-9% ad P 0.03-0.4% generally; and in accordance with the growth rate of Sn contain amount, the harden temperature boundary become broad. In case of cold moment after welding, they are recommended that higher speed TIG welding, smaller melting site and less than 200$^{\circ}C$ for pre-heating temperature. In case of C7701, the 10-20% Ni, 15-30% Zn are widely used.. If it is upper 30% Zn, it become (${\alpha}+{\beta}$) system and adhesive power rate become lower, and the productivity become lower in low temperature but the productivity become higher in high temperature. Nickel Silver's resistance of electricity is well; and the heatproof and incorrodibility is good, too. Lastly, in case of C8113, good at persistence in salty and grind; high in strength of high temperature. In case of white brass, contain 10-30% Nickel and hardened in high temperature and become single phrase. For these reason, the crystallization particles easily become large, if the resistance become higher small amount of Pb, P, S separation rate become higher.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.60 no.1
• /
• pp.23-28
• /
• 2015

This study was performed to investigate the adequate standard pot and number of plants per tree of raising seeding pot on the foxtail millet transplanting culture in the southern province. Due to the various application of wellbeing-health food recently, for upbringing of the foxtail millet, millet and sorghum in minor cereals, R & D and policy support is being promoted actively. The foxtail millet growing season is so short from 90 to 130 days, and it is large variations for a growth temperature. The main results are as follows. When it comes to foxtail millet transplantation, seedling quality of 406 holes, 200 holes and 162 holes of raising seeding pot type were not all significant, and field rooting percentage is accounted for all 94 to 95%. Yield of a foxtail millet was exposed in 406holes 305 kg/10a>162holes 303 kg> 200holes 302 kg order, and it was no significance between test processing. When it's the raising seeding transplanting culture, in case of pot culture, 406holes pot culture were reduced the bed soil cost 63%, pot 50%, working hours 18% for 200holes pot. Transplanting seedling quality per a foxtail millet transplanting culture method, dry weight was high inclination as transplanting number of plant is less, and field rooting percentage displayed more than all 95%. Yield appeared to 2 plants seedling transplanting 315kg/10a> 3 plants seedling transplanting 304kg>1 plant seedling transplanting 256kg order. The projected cost per the pot-sort on the raising seeding transplanting culture of foxtail millet, the seedling transplanting culture of 406holes was reduced 40% percentages compared to 200holes as 76,230won/10a. As a result, 406holes pot and 2plants seedling transplanting culture, labor-saving culture was possible.

• Radiation Oncology Journal
• /
• v.11 no.1
• /
• pp.51-58
• /
• 1993

We tried to establish the theoretical basis of clinical use of combined modality of hyperthermia and radiation therapy. For this purpose, we made an in vitro experiment in order to get the synergistic and/or additive effects on the cell killing of hyperthermia combined with radiation therapy by using the microwave-hyperthermia machine already installed at our department. In our experiment, we use two human cell lines: MKN-45 (adenocarcinoma of stomach) and K-562 (leukemia cell lines). In cases of combined treatments of hyperthermia and gamma-irradiation, the therapeutic effect was the highest in the simultaneous trial. Hyperthermia after gamma irradiation showed slightly higher therapeutic effect than that before irradiation without significant difference, but its effect was the same in the interval of 6 hours between hyperthermia and irradiation. The higher temperature and the longer treatment time were applied, the higher therapeutic effects were observed. We could observe the thermoresistance by time elapse at $43^{\circ}C$. When hyperthermia was done for 30 minutes at the same temperature, thermal enhancement ratio (TER) at DO. 01 (dose required surviving fraction of 0.01) were $2.5{\pm}0.08,\;3.75{\pm}0.18$, and $5.0{\pm}0.15\;at\;436{\circ}C,\;44^{\circ}C,\;and\;45^{\circ}C$ respectively in K-562 leukemia cell lines. Our experimental data showed that more cell killing effect can be obtained in the leukemia cell lines, although they usually are known to be radiosensitive, when treated with combined hyperthermia and radiation therapy. Furthermore, our data show that leukemia cell lines may have various intrinsic radiosensitivity, especially in vitro experiments. The magnitude of cell killing effect, however, will be less than that of MKN-45.

• Food Science and Preservation
• /
• v.23 no.6
• /
• pp.804-810
• /
• 2016

This study aimed to compare the quality characteristics of developed rice Jochung (E) with those of commercial-rice Jochung (A, B, C, and D). The total soluble solid, reducing sugar, and dextrose equivalent of developed rice Jochung were $80^{\circ}Brix$, 44.53%, and 56.94%, respectively. The pH and titrable acidity were 6.25 and 0.19%, respectively. The color difference value (${\Delta}E$) of developed rice Jochung was 74.42, which was significantly lower than the other samples investigated. The light transmittance and total polyphenol contents of developed rice Jochung were 56.4%T and 108.23 mg GAE/100 g, respectively. The adhesiveness values of various commercial-rice Jochung products were 29.0~66.0 sec, while that of developed-rice Jochung was 61 sec, showing good textural properties for use in manufacturing Hangwa, a Korean traditional cookie. The electron-donating values of various rice Jochung were 20.4~50.3%, among which the developed-rice Jochung showed the highest value. The reducing powers of various rice Jochung products were 0.44~0.72, while that of the developed product was 0.72, which was significantly higher than the other values. Sensory evaluation revealed that the color scores of developed- and commercial-rice Jochung products were 6.70~6.80. Flavor scores of rice Jochung products ranged from 6.00 to 7.00. Taste and mouth feeling scores of developed-rice Jochung did not significantly differ from those of commercial Jochung products. Compared to commercial-rice Jochung products, developed-rice Jochung made with malt extract exhibited high polyphenols content. However, there were no significant differences in the overall acceptability scores between commercial-rice Jochung products and the developed product. The developed-rice Jochung analyzed in this study may be useful as a traditional sweetener for various Hangwa products as a substitute for corn syrup or Jochung.