• Korean Journal of Poultry Science
• /
• v.46 no.2
• /
• pp.65-75
• /
• 2019

A number of Korean native chicken(KNC) populations were registered in FAO (Food and Agriculture Organization) DAD-IS (Domestic Animal Diversity Information Systems, http://www.fao.org/dad-is). But there is a lack of scientific basis to prove that they are unique population of Korea. For this reason, this study was conducted to prove KNC's uniqueness using 25 Microsatellite markers. A total of 548 chickens from 11 KNC populations (KNG, KNB, KNR, KNW, KNY, KNO, HIC, HYD, HBC, JJC, LTC) and 7 introduced populations (ARA: Araucana, RRC and RRD: Rhode Island Red C and D, LGF and LGK: White Leghorn F and K, COS and COH: Cornish brown and Cornish black) were used. Allele size per locus was decided using GeneMapper Software (v 5.0). A total of 195 alleles were observed and the range was 3 to 14 per locus. The MNA, $H_{\exp}$, $H_{obs}$, PIC value within population were the highest in KNY (4.60, 0.627, 0.648, 0.563 respectively) and the lowest in HYD (1.84, 0.297, 0.286, 0.236 respectively). The results of genetic uniformity analysis suggested 15 cluster (${\Delta}K=66.22$). Excluding JJC, the others were grouped in certain cluster with high genetic uniformity. JJC was not grouped in certain cluster but grouped in cluster 2 (44.3%), cluster 3 (17.7%) and cluster8 (19.1%). As a results of this study, we can secure a scientific basis about KNC's uniqueness and these results can be use to basic data for the genetic evaluation and management of KNC breeds.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.901-910
• /
• 2003

Using the G-, C-, and NOR-banding techniques, a karyotyping for Korean Native Pig was performed. Blood samples were collected from 50 male Korean Native Pigs that had been bred at the National Livestock Research Institute and then blood cells were prepared from in vitro cultures followed by karyotyping; G-, C-, and NOR-banding patterns of metaphase chromosomes were analyzed. The karyotype of Korean Native Pig is 38, XX or XY which consists of 5 pairs of submetacentric chromosomes(Group I), 2 pairs of acrocentric chromosomes with short p-arm(Group II), 5 pairs of medium metacentric chromosomes(Group III), 6 pairs of acrocentric chromosomes(Group IV) and metacentric X and Y sex chromosomes. On GTG-banding, the Korean Native Pig exhibited a typical and identical banding pattern in each homologous chromosomes. Overall chromosomal morphology and positions of typical landmarks of the Korean Native Pig were virtually identical to those of Committee for the Standardized Karyotype of the Domestic Pig(CSKDP). However, numbers of G-bands of the Korean Native Pig chromosomes were more than those of CSKDP. In chromosomes 1, 3, 5, 6, 7, 8, 13, 14, 15, 16, 17, 18 and X, the Korean Native Pig exhibited more separated bands as compared with CSKDP. In C-banding patterns, although the quantity of heterochromatin was variable in each chromosome, most of the Korean Native Pig chromosomes had heterochromatic C-bands on centromeres. However, the heterochromatic C-band was constantly observed on the whole Y chromosome. In AgNOR staining, the NORs were located at centromeres on the chromosomes 8 and 10. The number of NORs per metaphase ranged from 2 to 4 giving a mean value of 2.13. The number of NORs were distributed on all chromosome pair 10 but not on chromosome 8. The sizes of NORs were also differed between homologous chromosomes 8. Numbers of NORs of Korean Native Pig were significantly higher than those of Yorkshire. The pattern of pig NORs was polymorphic in breeds, individuals and cells, especially on chromosome 8.

• Horticultural Science & Technology
• /
• v.19 no.4
• /
• pp.521-525
• /
• 2001

This study investigated the effects of conventional predrying and modified atmosphere (MA) on the head quality and storability of Chinese cabbage 'Norang' cultivar. Immediately after harvest, heads were predried for 2 days and MA stored in $50{\mu}m$ PE film packages at $4^{\circ}C$. MA packaging restrained Hunter L and b values of Chinese cabbage more effectively than non-packaging during storage at $4^{\circ}C$. But there was little change between the two treatments. Fresh weight decreased less in heads treated with predrying and MA than non-treatment during storage. Predried Chinese cabbage heads kept a high level of soluble solids in 4 weeks of storage, while non-packaging maintained high contents of soluble solids for 6 weeks of storage period. Chinese cabbage heads contained 7.0 mg/gFW glucose, 6.3 mg/gFW fructose, and 0.6 mg/gFW sucrose as major soluble sugars at harvest. The content of sugars decreased immediately after predrying and increased steadily after 2 weeks storage. It was found inappropriate to assess head quality of Chinese cabbage by investigating was investigated by Hunter a, firmness, dry matters content, pH, and soluble sugars after predrying and MA package. Marketability of Chinese cabbage was lost when heads were stored at room temperature in 2 weeks. It showed poor appearance of heads stored at $4^{\circ}C$ in 7 weeks. Decay occurred in Chinese cabbage stored in MA under excessive relative humidity. Predried head showed good appearance during storage at $4^{\circ}C$ for 7 weeks. As a result, Chinese cabbage heads can be successfully stored for at least 7 weeks with predrying and MA storage.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.1
• /
• pp.89-94
• /
• 1999

This experiment was carried out to determine harvest date and cultivar effects on growth characteristics, forage yield and quality of spring sown oats at the middle mountain(450m) area at the forage experimental field, Namweon Branch, National Livestock Research Institute. The experiment was arranged in a split plot design with three replication. The main plot consisted of the harvest date(9 June, 18 June). The subplots consisted of different maturities of oat cultivars such as Cayuse, Swan, Foothill, Cashel, Martlock and Winjardie. The results obtained are summarized as follows; A period of 50 days was required to be first headed from seeding with early maturity oats(Swan), but that of 77 days was required with late maturity(Foothill). The dry matter content of early maturity(Swan) oats at 9 June and 18 June were 24.01% and 35.69%, but that of late maturity cultivars(Foothill) were 14.02% and 22.84%. The fresh yield of late maturity(Foothill) oats at 9 June and 18 June were 62,666kg and 59,666kg, but that of early maturity(Cashel) were 54,222kg and 45,493kg(P<0.05). The dry yield of early maturity (Cashel) oats at 9 June was 10,169kg, but that of early maturity (Martlock) was 6,272kg. But no significant difference was found among cultivars at June 18. Crude protein content of oats were decreased from 14.0% to 11.1% as the growing stage progressed, ADF, NDF and CF contents were increased. And in vitro dry matter digestibility was decreased as the harvest date delayed. The present experiment indicated that spring sown oats(Foothill) can be successfully produced as fresh forage by seeding in middle March and harvesting in 10 and 20 June at the middle mountain (450m) area.

• The Journal of Korean society of community based occupational therapy
• /
• v.10 no.1
• /
• pp.51-61
• /
• 2020

Objectives : The purpose of this study is to investigate the effect of object size and reaching distance on kinematic factors of the upper limb while performing arm reaching for normal subjects. Methods : The subjects of this study were 30 university students who were in D university in Busan, and the measuring tool was CMS-70P(Zebris Medizintechnik Gmbh, Germany), a three-dimensional motion analyzer. The task had six conditions. The average velocity of motion, average acceleration, maximum velocity, and the velocity definite number of movements were measured according to changes in object size(2cm, 10cm) and reaching distance(15%, 37.5%, 60%) when they performed arm reaching. The general characteristics of the subject were technical statistics. One-way ANOVA measurement was used to compare variables when the arm reaching task was performed from two object sizes to three reaching distance, and the post-test was conducted with Tukey test. In addition, an independent t-test was used to analyze the kinematic differences according to the two object sizes at three reaching distances. A two-way ANOVA measurement (3×2 Two-way ANOVA measurement) was performed to identify the interaction of the reaching distance(15%, 37.5%, 60%) and the object size(2cm, 10cm). The statistical significance level α was set to .05. Results : When the size of the object increased, the velocity and maximum velocity also increased, but the definite number of velocity decreased. When the reaching distance increased, the velocity and maximum velocity increased, whereas the definite number of velocity decreased. Conclusion : The clinical significance of this study could be utilized as the baseline data for grading object size and reaching distances when the reaching training is implemented for patients whose central nervous system was damaged.

• Horticultural Science & Technology
• /
• v.34 no.4
• /
• pp.528-536
• /
• 2016

This study was conducted to examine the effect of 0.4% of $CaCl_2$, $2H_2O$, $1mg{\cdot}L^{-1}$ of Calmodulin (CaM)-SH, 250-folds of coating agent (WE-36), 1,000-folds of $GA_{4+7}+BA$ and 3 types of paper bagging treatments on russet incidence and fruit quality attributes of 'Gamhong' apple. The pattern of russet occurrence was slightly different for 4 years (from 2012 to 2015) in 'Gamhong' apple. The russet occurrence was lowest in $GA_{4+7}+BA$ treatment at 20 days after full bloom (DAFB), compared with other treatments. The $GA_{4+7}+BA$ treatment increased fruit weight at 20 DAFB, while the other fruit quality attributes were not influenced. The russet occurrence was lower not only in a single bag application than in untreated ones but also in yellow bagging and discolored bagging applications than in a white bagging application. The russet occurrence in a bagging application was lower at 20 DAFB than at 30 and 40 DAFB, while fruit quality attributes were not affected by bagging applications. The russet incidence was lower in $GA_{4+7}+BA$ twice treatments at 20 and 30 DAFB, and calcium coated bag at 30 DAFB after $GA_{4+7}+BA$ treatment at 20 DAFB than in untreated fruit. The rate of russet incidence was lowest at equator region in $GA_{4+7}+BA$ treatment, compared with the other fruit regions. Overall, the results suggest that one and/or two applications of $GA_{4+7}+BA$ (1,000-folds) treatment at 20 DAFB should reduce the risk of russet incidence in 'Gamhong' fruit.

• The Journal of Korean Academy of Prosthodontics
• /
• v.48 no.4
• /
• pp.273-279
• /
• 2010

Purpose: The purpose of this in vitro study was to compare the marginal adaptation of a ceramic-pressed-to-metal restoration with traditional metal-ceramic restoration. Materials and methods: Duplicating the prepared resin tooth, 20 metal dies were fabricated. Twenty metal copings of 2 groups which were metal ceramic restoration and pressed to metal restoration were fabricated. The marginal opening of each coping was measured with Microscope (BX 60M-36E $41D^{(R)}$: Olympus, Japan). After porcelain build-up, the marginal opening of metal ceramic restoration and pressed to metal restoration ($PoM^{(R)}$: Ivoclar vivadent., Liechtenstein) were also evaluated in the same method. The measurements were analyzed using Wilcoxon Signed Ranks test and Mann-Whitney U test. Results: Within the limits of this study, the results were as follows. 1. Metal-ceramic restorations in coping state ($64.93{\pm}12.48\;{\mu}m$) in compared with Metal ceramic restorations after porcelain build-up ($63.43{\pm}12.86\;{\mu}m$) had no significant difference in marginal adaptation. 2. Pressed-metal-ceramic restorations in coping state ($50.00{\pm}12.28\;{\mu}m$) in compared with Pressed metal ceramic restorations after porcelain build-up ($56.72{\pm}13.80\;{\mu}m$) had no significant difference in marginal adaptation. 3. Metal-ceramic restorations in compared Pressed-metal-ceramic restorations had no significant difference in marginal adaptation. Conclusion: Pressed-metal-ceramic restorations have the advantage of being technically less change through using of the lost-wax technique and this allows for the convenience of a full-contour ceramic wax-up as opposed to the more technique-sensitive layering method. Pressed-metal-ceramic restorations may be considered in clinic on the basis of the result of this study and the advantage of this system.

• Progress in Medical Physics
• /
• v.23 no.1
• /
• pp.8-14
• /
• 2012

In order to develop a Patient respiratory management system includinga biofeedback function for4-dimentional radiation therapy, this study investigated anoptimal tracking algorithmfor moving target using IR (Infra-red) camera as well as commercial camera. A tracking system was developed by LabVIEW 2010. Motion phantom images were acquired using a camera (IR or commercial). After image process were conducted to convert acquired image to binary image by applying a threshold values, several edge enhance methods such as Sobel, Prewitt, Differentiation, Sigma, Gradient, Roberts, were applied. The targetpattern was defined in the images, and acquired image from a moving targetwas tracked by matching pre-defined tracking pattern. During the matching of imagee, thecoordinateof tracking point was recorded. In order to assess the performance of tracking algorithm, the value of score which represents theaccuracy of pattern matching was defined. To compare the algorithm objectively, we repeat experiments 3 times for 5 minuts for each algorithm. Average valueand standard deviations (SD) of score were automatically calculatedsaved as ASCII format. Score of threshold only was 706, and standard deviation was 84. The value of average and SD for other algorithms which combined edge detection method and thresholdwere 794, 64 in Sobel, 770, 101 in Differentiation, 754, 85 in Gradient, 763, 75 in Prewitt, 777, 93 in Roberts, and 822, 62 in Sigma, respectively. According to score analysis, the most efficient tracking algorithm is the Sigma method. Therefore, 4-dimentional radiation threapy is expected tobemore efficient if threshold and Sigma edge detection method are used together in target tracking.

• Journal of Gastric Cancer
• /
• v.8 no.1
• /
• pp.27-34
• /
• 2008

Purpose: Many recent studies have reported on the feasibility and usefulness of laparoscopy assisted distal gastrectomy (LADG) for treating early gastric cancer. On the other hand, there has been few reports about laparoscopy assisted total gastrectomy (LATG) because upper located gastric cancer is relatively rare and the surgical technique is more difficult than that for LADG, We now present our procedure and results of performing LATG for the gastric cancer located in the upper or middle portion of the stomach. Materials and Methods: From Jan 2005 to Sep 2007, 96 patients underwent LATG by four surgeons at the Asan Medical Center, Seoul, Korea. Among them, 48 consecutive patients who were operated on by asingle surgeon were analyzed with respect to the clinicopathological features, the surgical results and the postoperative courses with using the prospectively collected laparoscopy surgery data. Results: There was no conversion to open surgery during LATG. For all the reconstructions, Roux-en Y esophago-jejunostomy and D1+beta lymphadenectomy were the standard procedures. The mean operation time was $212{\pm}67$ minutes. The mean total number of retrieved lymph nodes was $28.9{\pm}10.54$ (range: $12{\sim}64$) and all the patients had a clear proximal resection margin in their final pathologic reports. The mean time to passing gas, first oral feeding and discharge from the hospital was 2.98, 3.67 and 7.08 days, respectively. There were 5 surgical complications and 2 non-surgical complications for 5 (10.4%) patients, and there was no mortality. None of the patients needed operation because of complications and they recovered with conservative treatments. The mean operation time remained constant after 20 cases and so a learning curve was present. The morbidity rate was not different between the two periods, but the postoperative course was significantly better after the learning curve. Analysis of the factors contributing to the postoperative morbidity, with using logistic regression analysis, showed that the 8MI is the only contributing factor forpostoperative complications (P=0.029, HR=2.513, 95% CI=1.097-5.755). Conclusions: LATG with regional lymph node dissection for upper and middle early gastric cancer is considered to be a safe, feasible method that showed an excellent postoperative course and acceptable morbidity. BMI should be considered in the patient selection at the beginning period because of the impact of the BMI on the postoperative morbidity.

• Archives of design research
• /
• v.17 no.4
• /
• pp.241-250
• /
• 2004

In this research, the copper alloy plates C2200, C5210, C7701, C8113 were selected to make datum and to identify further usage of metal craft experimentation. For its experimentation, the general welding and TIG welding methods were researched; for 2nd experimentation, the Reticulation and Electroforming skill's differences in color and temperature were researched. With these methods 3 different kinds of works are introduced for sample studies. For this research, Dr. Lee, Dong-Woo who works in Poongsan Metal Co, supported 4 kinds of copper alloy metals. Which are Commercial bronze (Cu-Zn), Deoxidiged Copper(Cu-Sn-P), Nickel Silver (Cu-Ni-Zn), and White Bronze (Cu-Ni); they were applied partly and wholly by the method of Laminatin, Reticulation, Fusing, and Electroforming skills. In case of C2200, the brass, the A. C. TIG welding method is better under 2mm slight plate; the D.C. TIG welding is better upper 2mm plate; and 250~300$^{\circ}C$ is recommended for remain heat treatment. In case of C5210, not having Hydrogen in high temperature return period, doesn't need Oxygen in high temperature and hardening in comparative high temperature neither, it is good for welding. It contains Sn 2-9% ad P 0.03-0.4% generally; and in accordance with the growth rate of Sn contain amount, the harden temperature boundary become broad. In case of cold moment after welding, they are recommended that higher speed TIG welding, smaller melting site and less than 200$^{\circ}C$ for pre-heating temperature. In case of C7701, the 10-20% Ni, 15-30% Zn are widely used.. If it is upper 30% Zn, it become (${\alpha}+{\beta}$) system and adhesive power rate become lower, and the productivity become lower in low temperature but the productivity become higher in high temperature. Nickel Silver's resistance of electricity is well; and the heatproof and incorrodibility is good, too. Lastly, in case of C8113, good at persistence in salty and grind; high in strength of high temperature. In case of white brass, contain 10-30% Nickel and hardened in high temperature and become single phrase. For these reason, the crystallization particles easily become large, if the resistance become higher small amount of Pb, P, S separation rate become higher.