• 한국생활과학회지
• /
• 제24권2호
• /
• pp.255-266
• /
• 2015

In this study, we have developed the ergonomic pattern from the 3D human body reflecting cycling posture and extensibility of the stretch fabrics. Adjusting pressure level in the construction of athlete's tight-fitting stretch garments by reducing the original pattern is a challenging subject, which influence on the performance of the wearer directly. Therefore, in this study, relationships between the reduction rates of the 2D pattern obtained from the 3D human scan and resultant clothing pressure were explored to improve the fit and pressure exerted by reduced clothing pattern. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on two consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Comparing 2/3T-pattern with T-pattern, the latter was superior to 2/3T-pattern in terms of adhere well to the waist and hip area in the 0.032 significance level. T-pattern was superior to 2/3T-pattern in terms of fitting and wear comfort. As results, the pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the skin while cycling posture, so that the extra ease for movement and good fit was not need to be considered. The optimized reduction rates were determined with the proposed reduction rate, the resultant pressure range was within the range of $0.5{\sim}3.0gf/cm^2$ at eight locations on the body except front waist band and thigh band.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2001년도 International Symposium on Signal transduction in Toxicology
• /
• pp.117-117
• /
• 2001

The aim of this study was to assess a possible alternative method as replacement for in vivo phototoxicity test. The 3T3 mouse fibroblast neutral red uptake phototoxicity assay (3T3 NRU PT assay) is a screening method for studying DNA or cellular damage. Photohemolysis assay is a mechanistic study for investigating oxygen-dependent membrane damage.(omitted)

• 대한기계학회논문집A
• /
• 제25권9호
• /
• pp.1325-1333
• /
• 2001

Critical defects in pressure vessels and pipes are generally found in the form of a semi-elliptical surface crack, and the analysis of which is consequently an important problem in engineering fracture mechanics. Furthermore, in addition to the traditional single parameter K or J-integral, the second parameter like T-stress should be measured to quantify the constraint effect. In this work, the validity of the line-spring finite element is investigated by comparing line-spring J-T solutions to the reference 3D finite element J-T solutions. A full 3D-mesh generating program for semi-elliptical surface cracks is employed to provide such reference 3D solutions. Then some structural characteristics of the surface-cracked T and L-joints are studied by mixed mode line-spring finite element. Negative T-stresses observed in T and L-joints indicate the necessity of J-T two parameter approach for analyses of surface-cracked T and L-joints.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권2호
• /
• pp.5-7
• /
• 2016

We present an experimental investigation of the superconducting transition temperatures, $T_c$, of superconductor/ferromagnet bilayers with varying the thickness of ferromagnetic layer. FeN was used for the ferromagnetic (F) layer, and NbN and Nb were used for the superconducting (S) layer. The results were obtained using three different-thickness series of the S layer of the S/F bilayers: NbN/FeN with NbN thickness, $d_{NbN}{\approx}9.3nm$ and $d_{NbN}{\approx}10nm$, and Nb/FeN with Nb thickness $d_{Nb}{\approx}15nm$. $T_c$ drops sharply with increasing thickness of the ferromagnetic layer, $d_{FeN}$, before maximal suppression of superconductivity at $d_{FeN}{\approx}6.3nm$ for $d_{NbN}{\approx}10nm$ and at $d_{FeN}{\approx}2.5nm$ for $d_{Nb}{\approx}15nm$, respectively. After shallow minimum of $T_c$, a weak $T_c$ oscillation was observed in NbN/FeN bilayers, but it was hardly observable in Nb/FeN bilayers.

• Journal of Animal Science and Technology
• /
• 제47권5호
• /
• pp.769-782
• /
• 2005

Holstein 거세송아지 24두를 대상으로 육성 및 비육전기의 조사료 급여형태에 따라 3개 처리(T1: 농후사료+볏짚, T2: 농후사료+목건초, T3: 맥주박 TMR)를 두어 6개월령부터 23개월령까지 18개월간 사양시험 후 도체조사를 실시한 결과, 처리별 출하체중 및 일당증체량은 각각 751-802 kg(평균 782.3 kg) 및 1.064-1.159 kg(평균 1.122 kg)으로 모두 T2 > T3 > T1 순으로 높았고, T2의 일당증체량이 T1에 비해 8.9%가 개선되었다. 도체율, 등지방두께 및 등심단면적은 각각 60.6-60.9 %, 6.50-7.13mm 및 82.9-84.1cm2 이었고, 근내지방도 및 육색은 각각 3.1-3.3 및 4.0-4.1 이었으며, 쇠고기의 전단력 및 보수력은 각각 4.6-4.7 및 50.7-50.9로 이들 모두는 처리간에 유의차는 없었으나, 소득은 두당 882.8-991.7천원으로 T2 및 T3가 T1 보다 12-7% 더 높았다.이상과 같은 결과들을 종합해 볼 때 Holstein 거세우를 23개월령까지 비육할 경우, 근내지방도가 높은 쇠고기 생산이 가능하며, 육성 및 비육전기에 목건초나 맥주박위주의 TMR을 급여하면 볏짚보다 출하체중을 높여 소득을 향상시킬 것으로 판단된다.

• 대한수학회보
• /
• 제32권2호
• /
• pp.303-308
• /
• 1995

We consider a torus T, that is, a compact surface with genus 1 and $\Omega = D^2 \times S^1$ topologically with $\partial\Omega = T$, where $D^2$ is the open unit disk and $S^1$ is the unit circle. Let $\omega = (x,y)$ denote the generic point on T. For a smooth immersion $u : T \to R^3$, we define the Dirichlet functional by $$ E(u) = \frac{2}{1} \int_{T} $\mid$\nabla u$\mid$^2 d\omega $$ and the volume functional by $$ V(u) = \frac{3}{1} \int_{T} u \cdot u_x \Lambda u_y d\omege $$.

• 한국축산식품학회지
• /
• 제32권4호
• /
• pp.512-519
• /
• 2012

본 시험은 육계에게 맥섬석 또는 한방제재를 첨가하여 육계의 생산성과 육질에 미치는 효과를 알아보기 위하여 브로일러 600수를 공시하여 4처리구당 50수씩${\times}$3반복으로 나누어, 대조구(0%), T1구(맥섬석 0.3%), T2구(한방소재0.3%), T3구(맥섬석0.3%+한방소재0.3%)를 5주 동안 첨가 급여한 결과는 다음과 같다. 총 증체량과 일당증체량은 다른 처리구에 비하여 T2구가 가장 높았고(p<0.05), 폐사율은 대조구(8%)가 처리구보다 크게 높아 통계적인 유의차가 나타났다(p<0.05). 혈중 콜레스테롤은 대조구(111.8 mg/dL)가 처리구(102.5-107.7 mg/dL)보다 더 높았으나, 혈중 IgG는 처리구(5.23-6.71 mg/dL)가 대조구(4.5 mg/dL)보다 더 높게 나타났다(p<0.05). 계육의 가열감량과 전단력은 처리구(각각 15.25-16.55%, 1.47-1.55 $kg/cm^2$)가 대조구(17.08%, 1.91 $kg/cm^2$)보다 더 낮았으나, 보수성은 오히려 처리구(55.97-56.01%)가 대조구(54.40%)보다 더 높았다(p<0.05). 가슴육의 콜레스테롤 함량은 대조구에 비하여 처리구(80.81-83.59 mg/100 g)가 더 낮아 통계적인 유의차가 나타났다(p<0.05), 결론적으로 육계에게 맥섬석과 한방제재 참가급여는 계육의 콜레스테롤 함량을 저하시키는 개선의 효과가 있었다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2004년도 춘계학술발표대회
• /
• pp.447-450
• /
• 2004

B2C 전자상거래 분야의 대표격인 인터넷쇼핑몰은 유통산업의 구조에 큰 영향을 미침에 따라 쇼핑몰의 성공적 구축 및 운영이 주된 이슈로 떠오르고 있다. 본 연구에서는 최근 웹사이트 평가모델로 주목 받고 있는 3C-D-T 모델을 기반으로 보완하여 국내 인터넷쇼핑몰 웹사이트 평가에 보다 최적화된 평가모형을 제시하였다. 평가모형의 보완은 주로 평가영역 부분에서 이루어졌는데, 인터넷 쇼핑몰 웹사이트에서 비교적 비중이 적은 Community 영역의 평가점수가 전체 웹사이트 평가에 주는 영향을 최소화 시키는 의미가 있었다. 그리하여 3C-D-T 모델의 평가영역의 Commerce 항목과 Community 항목을 통합하여 새로이 Com&Com 항목을 구성했고, 그것으로 보다 최적화 된 인터넷쇼핑몰 웹사이트 평가모형을 구축할 수 있었다. 그리고 이 새로운 평가모델로 국내 메이저 종합쇼핑몰 웹사이트들을 분석, 비교평가 하였다.

• 한국응용과학기술학회지
• /
• 제18권3호
• /
• pp.197-213
• /
• 2001

Conjugate trienoic acids (CTA) occurred in triacylglycerols (TGs) of the seed oils of Trichosanthes kirilowii, Momordica charantia and Aleurites fordii, and they were easily converted to their methyl esters in a mixture of sodium methoxide-methanol without any structural destruction. The main fatty acids in triacylglycerol (TG) fraction of the seed oils of Trichosanthes kirilowii are $C_{18:2{\omega}6}$ (32.2 mol %), $C_{18:3{\;}9c.11t,13c}$ (38.0 mol %) and $C_{18:1{\omega}9}$ (11.8 mol %), followed with $C_{16:0}$ (4.8 mol %) and $C_{18:0}$ (3.1 mol %). The TG fraction was resolved into 20 TG molecular species according to the partition number (PN) by reversed-phase (RP)-HPLC. The main TG species were $DT_{c2}$, $MDT_{c}$ and $D_{2}T_{c}$, of which amounts reached 63 mol % of total TG molecular species. The TG sample was fractionated into 11 fractions according to the number of double bond in the molecule by $Ag^{+}-HPLC$ and the species of $DT_{c2}$, $MDT_{c}$ and $D_{2}T_{c}$ were also eluted as main components. The TG species containing CTA showed unusual behaviours in the order of elution by HPLC ; first, TG moleular species of $DT_{c2}$ (D; dienoic acid, $T_{c}$; punicic acid, $T_{ci}$; ${\alpha}-eleostearic$ acid, M ; monoenoic acid, $S_{t}$; stearic acid) was eluted earlier than $Mt_{c2}$, although they have the same PN number of 40, and, secondly, the species of $DT_{ci2}$ with eight double bonds was eluted earlier than that of $D_2T_{ci}$ with seven double bonds. Intact TG of the seed oils of Momordica charantia contained mainly fatty acids such as $C_{18:3{\omega}9c,11t,13t}$ (57.7 mol %), $C_{18:1{\omega}9}$ (17.4 mol %), $C_{18:0}$ (12.3 mol %) and $C_{18:2{\omega}6}$ (10.6 mol %), and was classified into 13 fractions by RP-HPLC. The main TG species were as follows ; $MT_{ci2}$ [$(C_{18:1{\omega}9})(C_{18:3\;9c,11t,13t})_{2}$, 39.1 mol %] and $S_{t}T_{ci2}$ [$(C_{18:0})(C_{18:3\;9c,11t,13t})_2$, 33.9 mol %] comprising about 73 mol % of total TG species, accompanied by $DT_{ci2}$ [$(C_{18:2{\omega}6})(C_{18:3\;9c,11t,13t})_{2}$, 7.3 mol %], $D_{2}T_{ci}$ [$ (C_{18:2{\omega}6})_{2}(C_{18:3\;9c,11t,13t})$, 3.6 mol %] and $MDT_{ci}$ [$(C_{18:1{\omega}9})(C_{18:2{\omega}6})(C_{18:3\;9c,11t,13t})$, 3.5 mol %]. Simple TG species of $T_{ci3}$ [$(C_{18:3\;9c,11t,13t})_3]$ was present in a small amount of 1.4 mol %, but other simple TG species were not detected. The TG was also resolved into 11 fractions according to the number of double bond by $Ag^{+}-HPLC$, and the species were mainly occupied by $MT_{ci2}$ [$(C_{18:1{\omega}9})(C_{18:3\;9c,11t,13t})_{2}$, 39.4 mol %] and $S_tT-{ci2}$ [$(C_{18:0})(C_{18:3\;9c,11t,13t})_{2}$, 35.4 mol %] $DT_{ci2}$ species with eight double bonds was also developed faster than $D_2T_{ci}$ one with seven double bonds as indicated in the analysis of TG of the seed oils of T. kirilowii, and $MT_{ci2}$ species with cis, trans, trans-configurated double bond was eluted earlier than $MT_{c2}$ species with cis, trans, cis-configurated double bond. The main components of fatty acid in total TG fraction isolated from the seed oils of of Aleurites fordii were in the following order ; $C_{18:3\;9c,11t,13t}$ (81.2 mol %)> $C_{18:2{\omega}6}$ (8.5 mol %)> $C_{18:1{\omega}9}$ (5.4 mol %)$. With resolution of the TG by RP-HPLC, eight fractions such as $T_{ci3}$, $Dt_{ci2}$, $D_{2}T_{ci}$, $MT_{ci2}$, $PT_{ci2}$ (P; palmitic acid), $PMT_{ci}$, $PDT_{ci}$ and $S_{t}T_{ci2}$ ($S_{t}$; stearic acid) were isolated, respectively. TG species of $T_{ci3}$ [$(C_{18:3\;9c,11t,13t})_{3}$, 54.2 mol %], $DT_{ci2}$ [$(C_{18:2{\omega}6})(C_{18:3\;9c,11t,13t})_{2}$, 15.0 mol %] and $MT_{ci2}$ [$(C_{18:1{\omega}9})(C_{18:3 9c,11t,13t})_{2}$, 14.8 mol %] were present as main species.

• 디자인학연구
• /
• 제17권1호
• /
• pp.241-252
• /
• 2004

CAD는 이미 디자인 분야에서도 중요하게 사용되는 도구로 동시 공학적 프로세스 상에서 전통적인 디자인 방법은 점점 사라져 가고 있다. 하지만, 리버스 엔지니어링(Reverse Engineering) 방식의 CAD 도구는 디자이너들의 작업을 위해 사용하는 도구로는 아직 많은 문제점들을 가지고 있다. 특히 디자인 프로세스 초기 단계의 직관적인 작업의 특성으로 인해 디자이너들이 기존의 CAD 도구들을 이 단계에서 적용하기는 거의 불가능하다. 최근 이러한 정성적인 문제들에 대해 구체적으로 접근하려는 연구들이 소프트웨어 뿐 아니라 하드웨어적 측면에서도 이루어지고 있다. 이 글에서는 디자인 프로세스 상에서 사용되는 기존의 3D CAD 도구의 문제점들과 최근 연구되고 있는 새로운 인터페이스 접근 방법들에 대해 알아보았다. 또한 디자이너들을 위한 CAD 개발을 위한 가이드라인을 제시하고 이를 통해 유비쿼터스 컴퓨팅 환경에서 효율적으로 사용할 수 있는 디자인 도구를 개발하기 위한 방안을 제시하였다.