• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.440-446
• /
• 2010

Convergence of IT and BT is considered in many area, especially in medical care industry. The example of this trend is a capsule endoscope. But in a capsule endoscope, communication through human body has a few restrictions. At first, the transmit power should be limited not to have a bad effect on human organs and for the battery capacity. Second, the channel characteristic of human body has not been examined exactly. Third, general modulation / demodulation techniques which require a channel estimation cannot be used because of battery limit. There also may be a lot of interference signals because a capsule endoscope uses UWB bandwidth. In this paper, we introduce Chirp Spread Spectrum Differential Binary Phase Shift Keying(CSS-DBPSK) and propose Chirp Spread Spectrum On-Off Keying(CSS-OOK) which don't require a channel estimation and robust to interference signals. Using CSS-DBPSK or CSS-OOK, we can get 5 dB or 2~3 dB of Eb/N0 gain at 10-5 target BER. And if there are interference signals, those gains of CSS-DBPSK and CSS-OOK are increased.

• Journal of Food Hygiene and Safety
• /
• v.32 no.6
• /
• pp.460-469
• /
• 2017

The aim of this work was to study the comparison of anti-oxidative activity in a single serving size of commercial coffees and teas. Commercial regular coffees and teas, including, brand regular coffees ($BC_A$, $BC_B$, $BC_C$, $BC_D$, and $BC_E$), green tea ($GT_A$, $GT_B$, $GT_C$, and $GT_D$), black tea ($BT_A$, $BT_B$, and $BT_C$), pu-erh tea ($PT_A$, $PT_B$, and $PT_C$), chamomile tea ($CT_A$, $CT_B$, and $CT_C$), peppermint tea ($P_A$, $P_B$, and $P_C$), polygonatum odoratum tea ($POT_A$, $POT_B$, and $POT_C$), and jujube tea ($JT_A$, $JT_B$, and $JT_C$) were assayed for the levels of ascorbic acid, caffeine, total content of polyphenols and flavonoids, and ability to scavenge free radicals, using two in vitro antioxidant assays. The scavenging abilities of $BC_A$ and $BC_C$ were $664.91{\pm}48.87mg$ ascorbic acid equivalent/serving size and $624.36{\pm}16.18mg$ ascorbic acid equivalent/serving size, respectively. The four beverage samples ($BC_A$, $BC_C$, $GT_D$, and $BT_A$) significantly reduced the production of reactive oxygen species (ROS) and intracellular oxidative stress induced by $H_2O_2$. These results suggest that the beverages possess significant radical scavenging ability, which may be due to the presence of antioxidants. Furthermore, the significant reducing level of ROS evidences the potential antioxidant effects of these beverages in human cells.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.3
• /
• pp.375-380
• /
• 2000

The preliminary screening of several cyanobacteria, using mice bioassay, reveale the production of a hepatotoxin by the cyanobacterium Scytonema sp. strain BT 23 isolated from soil. An intraperitoneal injection of the crude toxin (LD50 56 mg/kg body wt) from this strain caused the death of the mice within 40 min, and the anmals showed slinical signs of mice within 40 min, and the animals showed clinical signs of hepatotoxicity. The toxin was purified and partially characterized. The active fraction appears to be nonpolar in nature and shows absorption peaks at 240 and 285 nm. The purified toxin had an LD50 of TEX>$100<\mu\textrm{g}/kg$ body wt and the test mice died within 40 min of toxin administration. The toxin-treated mice showed a 1.65-fold increase in liver weight at 40 min and the liver color chnged to dark red due to intrahepatic hemorrhage and pooling of blood. Furthermore, the administration of the toxin to test mice induced a 2.58, 2.63, and 2.30-fold increse in the activity of the serum enzymes alanine aminotransferase, lactate dehydrogenase, and alkaline phosphatase, respectively. Further experiments with the 14C-labeled toxin revealed a maximum accumulation of the toxin in the liver. The clinical symptoms in the mice were similar to those produced by microcystin-L.R. These results suggest that hepatotoxins may also be produced in non bloom-forming planktonic cyanobacteria.

• Journal of Korea Technology Innovation Society
• /
• v.19 no.4
• /
• pp.687-710
• /
• 2016

This study aims to empirically estimate distributed lag effects of expenditure by type of R&D on scientific publication in the national R&D program. To analyze the lag structure between them, we used a dataset comprised of panel data from 104 technologies categorized by 6T (IT, BT, NT, ST, ET, CT) from 2007 to 2014, and employed multiple regression analysis based on the polynomial distributed lag model. This is because it is highly likely to emerge multicollinearity, if a distributed lag model without special restrictions is applied to multiple regression analysis. The main results are as follows. In the case of basic research, its lag effects are relatively evenly distributed during four years. On the other hand, the applied research and experimental development have distributed lag effects for three years and two years respectively. Therefore, when it comes to analyzing performance of scientific publication, it is necessary to be performed with characteristics of the time lag by type of R&D.

• Journal of the Korean Ceramic Society
• /
• v.53 no.2
• /
• pp.162-166
• /
• 2016

0.75BF-0.25BT ceramics were prepared by sintering at $980-1040^{\circ}C$ in air or under atmosphere powder. A sample with 1 mole %-excess $Bi_2O_3$ was also prepared to compensate for $Bi_2O_3$-evaporation. Physical and piezoelectric properties of these three samples were compared. When the sintering temperature increased from $980^{\circ}C$ to $1040^{\circ}C$, the density of the sample sintered in air decreased continuously due to Bi-evaporation. Due to the suppression of Bi-evaporation, the sample sintered under atmosphere powder had a higher density at sintering temperatures above $1000^{\circ}C$ than did the sample sintered in air. The addition of 1 mole %-excess $Bi_2O_3$ successfully compensated for Bi-evaporation and kept the density at the higher value until $1020^{\circ}C$. Grain size increased continuously when the sintering temperature increased from 980 to $1040^{\circ}C$, irrespective of the sintering atmosphere. When the sintering temperature increased, the piezoelectric constant ($d_{33}$) and the electromechanical coupling factor ($k_p$) increased for all samples. The sample with 1 mole % excess-$Bi_2O_3$ showed the highest density and the best piezoelectric properties at sintering temperature of $1020^{\circ}C$.

• Journal of the Korean Society for Heat Treatment
• /
• v.4 no.2
• /
• pp.1-8
• /
• 1991

The spheroidization of cold rolled lamellar pearlite in annealing at the temperatures between 600 and $700^{\circ}C$ has been studied by quantitative micrography. It was foud that the spheroidization proceeded as two stageh. The first stage was the stage of relieving the stored energy by cold work, the second was the stage of reducing the interface energy between ferrite and cementite. The spheroidization rate combining the spheroidization rate of each stages is described by the following equation : $$d(1/S)/dt=k_3{\cdot}D/_{(1/s)}\{{\sigma}V/_{(1/s)}+k_4{\cdot}{\exp}(-bt)\}$$ Where, S is the total area of the interface between ferrite and cementite per unit volume, D is the diffusion coefficient, ${\sigma}$ is the boundary energy, V is the volume fraction of the cementite, and $k_3$, $k_4$, b are constants.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.189-189
• /
• 2008

Due to the environmental issue vast research is going on to replace the widely used lead contented piezoelectric materials. Bismuth sodium titanate (abbreviated as BNT) based bismuth sodium titanate-barium titanate (abbreviated as BNBT) ceramic was prepared by using modified method rather than conventional mixed oxide method. This modification was made to improve the properties of BNT based ceramic. In this procedure $BaTiO_3$ (abbreviated as BT) was prepared using conventional mixed oxide method. Analytical grade raw materials of $BaCO_3$ and $TiO_2$ were weighted and ball milled using ethanol medium. The mixed slurry was dried and sieved under 80 mesh. Then the powder was calcined at $1100^{\circ}C$ for 2 hours. This calcined BT powder was used in the preparation of BNBT. Stoichiometric amount of $Bi_2O_3$, $Na_2CO_3$, $TiO_2$ and BT were weighted and mixed by using ball mill. The used calcination temperature was $850^{\circ}C$ for 2 hours. Calcined powder was taken for another milling step. BNBT disks were pressed to 15 mm of diameter and then cold isostatical press (CIP) was used. Pressed samples were sintered at $1150^{\circ}C$ for 2 hours. The SEM microstructure analysis revealed that the grain shape of the sintered ceramic was polyhedral and grain boundary was well matched where as the sample prepared by conventional method showed irregular arrangement and grain boundary not well matched. And sintered density was better (5.78 g/cc) for the modified method. It was strongly observed that the properties of BNBT ceramic near MPB composition was found to be improved by the modified method compare to the conventional mixed oxide method. The piezoelectric constant dB of 177.33 pC/N, electromechanical coupling factor $k_p$ of 33.4%, dielectric constant $K_{33}^T$ of 688.237 and mechanical quality factor $Q_m$ of 109.37 was found.

• Animal Bioscience
• /
• v.35 no.1
• /
• pp.87-95
• /
• 2022

Objective: This study was conducted to investigate the effect of associating calcium butyrate with tannin extract, compared to an antimicrobial on the growth performance, incidence of diarrhea, intestinal histology, immune-expression of cyclooxygenase-2 (COX-2) and tumor necrosis factor α (TNF-α) in piglets. Methods: Seventy-two piglets (36 barrows and 36 gilts) weaned at 28±2 d and initial body weight of 7.17±1.07 kg were allocated to 3 treatments in a randomized complete block design with 8 replicates per treatment and 3 animals per experimental unit. Treatments were composed of NC, negative control: basal diet without additives; PC, positive control: basal diet + 40 mg/kg of colistin sulfate; or BT, basal diet + calcium butyrate + tannin extract. The butyrate and tannin inclusion levels were 0.15% in the pre-starter phase and 0.075% in the starter phase. Incidence of diarrhea was monitored daily, and on d 14 and 35 of experiment, 1 animal from each experimental unit was slaughtered to collect intestinal samples. Results: No significant differences were observed for growth performance. The butyrate-and tannin-based additive resulted in reduced (p<0.05) incidence of diarrhea in piglets during d 1 to 14 and d 1 to 35 in comparison with the other treatments. Piglets that consumed the diet containing the calcium-butyrate and tannin showed a lower (p<0.05) crypt depth in the duodenum than those receiving the NC treatment at 14 d of experimentation. The BT treatment provided a lower (p<0.05) immune-expression of COX-2 at 14 d and TNF-α at 35 d in the duodenum. Conclusion: Association between calcium butyrate and tannin extract resulted in a significant decrease in the incidence of diarrhea and inflammatory process in the duodenum of piglets. Therefore, calcium-butyrate combined with tannin could be a part of an alternative program to reduce the use of antimicrobials in the diet of weaned piglets.

• Journal of the Korean Ceramic Society
• /
• v.41 no.11
• /
• pp.858-863
• /
• 2004

The thermoelectric power, dc conductivity and magnetic properties of the cubic L $a_{2}$ 3/Ti $O_{2.84}$ were investigated. The thermoelectric power was negative below 350 K. The measured thermoelectric power of L $a_{2}$ 3/Ti $O_{2.84}$ increased linearly with temperature, in agreement with model proposed by Emin and Wood, and was represented by A+BT. Temperature dependence indicates that the charge carrier in this material is a small polaron. L $a_{2}$ 3/Ti $O_{2.84}$ exhibited a cross over from variable range hopping to small polaron hopping conduction at a characteristic temperature well below room temperature. The low temperature do conduction mechanism in L $a_{2}$ 3/Ti $O_{2.84}$ was analyzed using Mott's approach. Mott parameter analysis gave values for the density of state at Fermi level [N( $E_{F}$)] = 3.18${\times}$10$^{20}$ c $m^{-3}$ e $V^{-1}$ . The disorder energy ( $W_{d}$) was found to be 0.93 eV, However, it was noted that the value of the disorder energy was much higher than the high temperature activation energy. The exist linear relation between log($\sigma$T)와 1/T in the range of 200 to 300 K, the activation energy for small polaron hopping was 0.15 eV.

• Journal of Magnetics
• /
• v.2 no.2
• /
• pp.38-41
• /
• 1997

Spinel ferrite thin films Fe3-x MnxO4 (x=0.000, 0.006, 0.0010, 0.015, 0.023) were prepared on the coverglass by ferrite plating technique. To investigate the uniaxial anisotrpy of the samples, the saturation and effective magnetization of the thin films were measured by VSM(vibrating sample magnetometer) and FMR(ferromagnetic resonance) measurements respectively. The spectroscopic splitting g factor were estimated from the ferromagnetic resonance curves. For x=0.000, 0.006, the effective magnetization was measured of temperatures form T=77 K to T=300 K. The results were analyzed in terms of Bloch's law Ms(T) = Ms(0) (1-BT3/2-CT5/2). The Bloch coefficient B, C were determined by fitting. Ms(0) was obtained by extrapolating Meff to 0 K. From this result, the spin wave stiffness constants D was also determined.