• 한국진공학회지
• /
• 제5권4호
• /
• pp.359-364
• /
• 1996

Pt/Ti/$SiO_2$/Si 기판 위에 r.f. 마그네트론 스퍼터링 방법으로 $300^{\circ}C$이하의 저온에서 SrTiO3 박막을 증착하였다. XRD, RBS, TEM, EPMA로 증착된 박막의 재료적 특성을 분석하였고, Al/$SrTiO_3$/Pt의 구조로 커패시터를 제작하여 전기적 특성을 분석하였다. 기판온도가 증가함에 따라 박막의 결정성과 유전율이 향상되었으나, $200^{\circ}C$이하의 기판온도에서는 Sr이 결핍된 조성을 갖게 되어 증착된 박막이 반도성을 나타내었다. 증착중에 기판에 양의 d.c. 전압을 10~30V 인가함으로써 박막의 결정성이 크게 향상되었고, 유전특성도 개선되었다. $300^{\circ}C$의 기판온도에서 20V의 d.c. bias를 인가하여 증착한 400nm 두께의 $SrTiO_3$ 박막은 <211> 우선방향성을 갖는 주상정 구조와 화학양론적인 조성을 나타내었고, 본 연구에서 가장 우수한 전기적 특성을 보였다. 100 kHz에서 유전율이 98, 유전손실이 3.4%였으며, 3V에서 누설전류는 $10^{-5}A/\textrm{cm}^2$였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 추계학술대회 논문집 전기물성,응용부문
• /
• pp.75-78
• /
• 2004

$Bi_{3.25}Eu_{0.75}Ti_3O_{12}$ (BET) thin films were deposited on the $LaNiO_3$ (LNO (100))/Si and Pt/Ti/$SiO_2$/Si substrates by the metal-organic decomposition method. Structural and dielectric properties of BLT thin films for the applications in nonvolatile ferroelectric random access memories were investigated. Both the structure and morphology of the films were analyzed by x-ray diffraction (XRD) and atomic force microscope (AFM). Even at low temperatures $650^{\circ}C$, the BET thinfilms were successfully deposited on LNO bottom electrode and exhibited (001) and (117) orientation. Compared with the Pt electrode films, the BET thin films on the LNO electrode annealed at $650^{\circ}C$ showed better dielectric constantsand remanent polarization. The BET thin films on the LNO electrode for the annealing temperature of $650^{\circ}C$, the remanent polarization Pr and coercive field were $45.6\;C/cm^2$ and 171 kV/cm, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 춘계학술대회 논문집 센서 박막재료 반도체재료 기술교육
• /
• pp.66-69
• /
• 2002

This paper presents deposition and characterizations of microcrystalline silicon$({\mu}c-Si:H)$ films prepared by hot wire chemical vapor deposition at substrate temperature below $300^{\circ}C$. The $SiH_{4}$ concentration$[F(SiH_{4})/F(SiH_{4})+F(H_{2})]$ is critical parameter for the formation of Si films with microcrystalline phase. At 6% of silane concentration, deposited intrinsic ${\mu}c-Si:H$ films shows sufficiently low dark conductivity and high photo sensitivity for solar cell applications. P-type ${\mu}c-Si:H$ films deposited by Hot-Wire CVD also shows good electrical properties by varying the rate of $B_{2}H_{6}$ to $SiH_{4}$ gas. The solar cells with structure of Al/nip ${\mu}c-Si:H$/TCO/glass was fabricated with single chamber Hot-Wire CVD. About 3% solar efficiency was obtained and applicability of HWCVD for thin film solar cells was proven in this research.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.131-131
• /
• 2000

We witnessed the enhancement of mangetoresistance (MR) in La0.75Ca0.25MnO3 thin films grown on Si (100) substrates by RF magnetron sputtering. The films are polycrystalline with (100) and (110) orientations. The lattice constants of films are reduced as much as 0.9% compared to the one of the bulk sample, which proves that the compressive stress on films was imposed by Si sbustrate. It is found that the MR value (Δ$\rho$/$\rho$0) of films are 0.33, 0.29 and 0.27 under a magnetic field of 1.5T for each films with deposition temperature of $700^{\circ}C$, 75$0^{\circ}C$ and 80$0^{\circ}C$, respectively. The correlation between the MR values and lattice constants of films is discussed. It is concluded that the compressive stress on films cause the enhancement of MR values of thin films grown on Si (1000 substrates. Some mechanism of compressive stress induced by Si substrate is suggested.

• 한국전기전자재료학회논문지
• /
• 제25권2호
• /
• pp.121-124
• /
• 2012

The characteristics of Ga-doped zinc oxide (GZO) thin films deposited at different deposition temperatures (TS~250 to $550^{\circ}C$) on 4H-SiC have been investigated. Structural and electrical properties of GZO thin film on n-type 4H-SiC(0001) were investigated by using x-ray diffraction(XRD), atomic force microscopy(AFM), Hall effect measurement, barrier height from I-V curve and Auger electron spectroscopy(AES). XRD $2\theta$ scan shows GZO thin film has preferential orientation with c-axis perpendicular to SiC substrate surface. The lowest resistivity ($\sim1.9{\times}10^{-4}{\Omega}cm$) was observed for the GZO thin film deposited at $400^{\circ}C$. As deposition temperature increases, barrier height between GZO and SiC was increased. Whereas, resistivity of GZO thin films as well as barrier height between GZO and SiC were increased after annealing process in air atmosphere. It has been found that the c-axis oriented crystalline quality as well as the relative amount of activated Ga3+ ions and oxygen vacancy may affect the electrical properties of GZO films on SiC.

• 한국재료학회지
• /
• 제4권4호
• /
• pp.416-427
• /
• 1994

비정질 $SiO_{2}$위에서 증착시킨 $Si_{1-x}Ge_x$합금의 증착온도에 따른 결정성, 미세구조와 조성의 균일성을 X선 회절법과 투과 전자현미겨으로 조사하였고, $Si_{1-x}Ge_x/Sio_2$계면을 고분해능 투과 전자현미경을 이용하여 원자단위로 관찰하였다. Ge의 몰분율을 0.3으로 놓고 증착온도를 $300^{\circ}C,400^{\circ}C,500^{\circ}C,600^{\circ}C,700^{\circ}C$로 변화시키며 Si-MBE로 증착된 박막은 , 분석 결과 $300^{\circ}C$에서는 비정질상만이 존재하였고 $400^{\circ}C$에서는 결정상과 비정질상이 공존하고 있었다. 두상은 $SiO_2$위에 함께 증착되었으나 초기 성장에서는 비정질상이 주로 성장되었으며 박막의 두께가 비정질층이 관찰되었다. $600^{\circ}C$이상에서는 결정상으로만 증착되었다. 증착된 다결정상은 주상성장을 하였다. 증착된 박막의 조성은 중착온도에 관계없이 균일하였으며, $Si_{1-x}Ge_x/Sio_2$계면은 다결정상이나 비정질상에 관계없이 평탄하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.26-26
• /
• 2000

High quality epitaxial Y2O3 thin films were prepared on Si(111) and (001) substaretes by using ion beam assisted deposition. As a substrate, clean and chemically oxidized Si wafers were used and the effects of surface state on the film crystallinity were investigated. The crystalline quality of the films were estimated by x-ray scattering, rutherford backscattering spectroscopy/channeling, and high-resolution transmission electron microscopy (HRTEM). The interaction between Y and Si atoms interfere the nucleation of Y2O3 at the initial growth stage, it could be suppressed by the interface SiO2 layer. Therefore, SiO2 layer of the 4-6 layers, which have been known for hindering the crystal growth, could rather enhance the nucleation of the Y2O3 , and the high quality epitaxial film could be grown successfully. Electrical properties of Y2O3 films on Si(001) were measured by C-V and I-V, which revealed that the oxide trap charge density of the film was 1.8$\times$10-8C/$\textrm{cm}^2$ and the breakdown field strength was about 10MV/cm.

• Journal of Korean Vacuum Science & Technology
• /
• 제6권1호
• /
• pp.46-50
• /
• 2002

C-SiC films with different content of SiC on stainless steel substrate were prepared with ion beam mixing. It was found that hydrogen concentrations in C-SiC coatings was higher than that in stainless steel after H$\^$+/ ion implantation followed by thermal annealing. Infrared (IR) transmission measurement was used to study the mechanism of hydrogen retention by C-SiC films. The vibrational features in the range between 400 and 3200 cm$\^$-1/ in IR transmission spectra show the Si-CH$_3$, Si-CH$_2$, Si-H, CH$_2$and CH$_3$bonds, which are responsible for retaining hydrogen.

• 한국진공학회지
• /
• 제5권2호
• /
• pp.133-138
• /
• 1996

단일 선구물질인 1, 3 -디실라부탄을 사용하여 고진공 하의 온도 영역 900-$1000^{\circ}C$에서 탄화규소 환충층이 형성된 Si(001) 기질 위에 입방형 탄화규소 박막을 적층 성장시켰다. 얻어진 탄화규소 박막의 화학량론적 비, 양질의 결정성 및 표면형태의 특성을 반사 고에너지 전자 회절, Xtjs 광전자 분광법, X선 회절, Xtjs 극접도, 주사 전자 현미경 및 투과 전자 현미경으로 확인하였다. 이들 결과로부터 단일 선구물질인 1, 3-디실라부탄이 입방구조를 가지는 탄화규소 박막의 적층 성장에 적절한 물질임을 밝혔다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집
• /
• pp.387-390
• /
• 2002

This paper presents deposition and characterizations of microcrystalline silicon(${\mu}$c-Si:H) films prepared by hot wire chemical vapor deposition at substrate temperature below 300$^{\circ}C$. The SiH$_4$ concentration[F(SiH$_4$)/F(SiH$_4$).+(H$_2$)] is critical parameter for the formation of Si films with microcrystalline phase. At 6% of silane concentration, deposited intrinsic ${\mu}$c-Si:H films shows sufficiently low dark conductivity and high photo sensitivity for solar cell applications. P-type ${\mu}$c-S:H films deposited by Hot-Wire CVD also shows good electrical properties by varying the rate of B$_2$H$\_$6/ to SiH$_4$ gas. The solar cells with structure of Al/nip ${\mu}$c-Si:H/TCO/g1ass was fabricated with single chamber Hot-Wire CVD. About 3% solar efficiency was obtained and applicability of HWCVD for thin film solar cells was proven in this research.