• Journal of Plant Biotechnology
• /
• v.32 no.2
• /
• pp.117-121
• /
• 2005

Immature embryos of 3 cultivars (Du Me Chal, Mi Baek Chal, Heug Jeom Chal) and 5 genotypes (HW1, KL103, HW3, HW4, KW7) were cultured on medium containing MS salts, Eriksson's vitamins, 1 mg/L 2,4-dichlorophenoxyacetic acid, 25 mM proline, 100 mg/L casamino acid, 3 mM MES, 1.7 mg/L $AgNO_3$ and 20 g/L sucrose (SIM). Frequency of somatic embryo formation on explant of immature embryos showed in HW1 (45.20%), KL103 (5.75%), HW3 (37.20%), HW4 (30.10%), KW70 (55.20%), Mi Baek Chal (18.74%), Heug Jeom Chal (22.41%), Du Me Chal (36.72%) and Hi II type (<10%), respectively. Yellowish friable embryogenic callus (YFEC) such as type II callus of Hi II genotype only produced from the HW3 and Heug Jeom Chal, whereas other cultivars and genotypes were directly formed somatic embryos with late-embryonic stages or expanded yellowish compact somatic embryo with morphological abnormality. The yellowish friable embryogenic callus (YFEC) could be proliferated on the same medium, which were maintained embryogenic capacity for 6 months over. Upon transfer to first regeneration and second regeneration medium, somatic embryos converted to plantlets at a frequency of approximately 100%. However, the expanded somatic embryos with abnormal morphology were slowly proliferated when subcultured on the same medium, and some of them were degenerated or converted to plantlets at a frequency of approximately 25%. Accordingly, The Heug Jeom Chal and HW3 genotype will be further used for development of high frequency transformation system in domestic maize germplasm.

• Journal of Korean Society of Forest Science
• /
• v.23 no.1
• /
• pp.1-8
• /
• 1974

The seed quality testing for Korean white pine (Pinus koraiensis), their pre-germination and embryo growing process were investigated and the abnormal embryo groups were discriminated by the use of soft X-ray photograph. The study results were as follows ; 1. The embryo reflection was clearly observed for air dried seeds (moisture content was 6.3%) at 30 sec, stratificated seeds at 60 sec (moisture content 24.0-36.0%) and immature seed (moisture content 41.0-64.0%) at 90sec., then the photographing variation for soft X-ray was the radiographing distance at 42cm focus M, voltage 19.5 K.V.P. and Ampere 8 mA. By the above result, the radiographing time for discriminating the embryo reflection was increased by the increase of moisture content in the seeds. 2. The embryo reflection could be clearly observed from the last ten days of June and the embryo length ratio to endosperm length was growing to 65% at the first ten days of September. By the result obtained the soft X-ray photograph was thought to be effective method for the study of inner morphology of seeds. 3. The clear reflection seeds for embryo and endorsperm were observed to 69.7% and the seeds were practically germinated to 75.2% The difference in number between the discriminated seeds by the soft X-ray photograph and the practically germinated seeds was only 6%. According to this results, the soft X-ray photograph was thought to be a effective methods for the germination diagnosis in the shortest time and with the exactness comparatively. 4. Because of the possibility of clearness for observation of pre-germination process, the soft X-ray photograph could be used for the study on the physiology of seed germination. 5. The frequency of abnormal embryos was observed of total 4.4% and their types and subtypes could be classified into twenty groups. Among these groups, single abnormal embryo type was divided into eight subtypes and observed of 2.0 percent, twin embryo was six subtypes and 1.8 percent, triple embryo was five subtypes and 0.5 percent, and inverse type was 0.12 percent.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.8
• /
• pp.989-994
• /
• 2007

This study was designed to investigate whether Sasa borealis leaves extracts (SLE) may inhibit yeast ${\alpha}-glucosidase$ and ${\alpha}-amylase$ activities and postprandial hyperglycemia in STZ-induced diabetic mice. Freeze-dried SLE was extracted with 70% methanol and followed by a sequential fractionation with dicholoromethan, ethylacetate, butanol, and water. Both ethylacetate and butanol fractions showed high inhibitory activities against the ${\alpha}-glucosidase$ and ${\alpha}-amylase$ enzymes. The $IC_{50}$ of ethylacetate and butanol fractions against ${\alpha}-glucosidase$ were 0.54 and 0.63 mg/mL, respectively, indicating a greater inhibition effect than acarbose (0.68 mg/mL) (p<0.05). Likewise, the two fractions exhibited a smaller $IC_{50}$ against ${\alpha}-amylase$, compared with acarbose (p<0.05). However, the yield of ethylacetate fraction of SLE was relatively small. Postprandial blood glucose testing of normal mice and STZ-induced diabetic mice by starch soln. loading (2 g/kg B.W.) showed that postprandial blood glucose level at 30, 60, and 120 min were markedly decreased by single oral administration of SLE butanol fraction (200 mg/kg B.W.) in both normal (p<0.0l) and diabetic mice (p<0.0l). Furthermore, the incremental area under the curve (AUC) was significantly lowered via SLE administration (5,745 versus 12,435 $mg{\cdot}mim/dL$) in the diabetic mice (p<0.0l). The incremental AUC in normal mice corroborated the hypoglycemic effect of SLE (p<0.0l) found in the diabetic mice. These results suggest that SLE may delay carbohydrate digestion and thus glucose absorption. In addition, SLE may have the potential to prevent and treat diabetes via its ability on lowering postprandial hyperglycemia.

• Korean Journal of Ichthyology
• /
• v.25 no.2
• /
• pp.82-89
• /
• 2013

The spawning behavior, development of eggs and larvae of the Five striped damselfish, Abudefduf vaigiensis were studied. The Five striped damselfish were caught at Dolsan Island, Yeosusi, Jeollanamdo from May in 2011. As a result of observation, male fish attracted female after cleaning the rock. Female left after spawning and male protected their eggs until they had hatched out. The fertilized eggs were elliptical in shape (mean long diameter: 1.06 mm; mean short diameter: 0.55 mm) and transparent. Larvae hatched at 53 hrs after fertilization in $24.5{\sim}26.5^{\circ}C$(mean $25.0^{\circ}C$). The newly hatched larvae were 2.55~2.86 mm (mean 2.71 mm, n=10) in total length and their mouth and anus were already opened. They began to eat rotifer and transformed to postlarva stage. 3 days after hatching postlarva was measured 2.74~2.97mm(mean 2.84 mm, n=10) in total length. 10 days after hatching postlarva was measured 3.85~4.20mm(mean 4.00 mm, n=10) in total length with dosal fin rays IV-5; ventral fin rays I-3; caudal fin rays 1~2.

• Clinical and Experimental Reproductive Medicine
• /
• v.26 no.2
• /
• pp.231-238
• /
• 1999

The objective of this study was to examine the effect of developmental stage and embryo age of in vitro produced bovine blastocysts after vitrification and thawing. In vitro cultured day 8 blastocysts after IVF were equilibrated 20% ethylene glycol (EG) for 3 min. and were vitrified using EFS40, which is consisted of 40% EG, 18% ficoll, 0.3M sucrose and 10% FBS added in mDPBS for 30 sec. before being plunged into $LN_2$. Also, survival in vitro was assessed by re-expansion and hatching or hatched at 24 hand 48 h postwarming, respectively. The results obtained in these experiments were summarized as follows; 1) When the embryos were cultured for 8 day after IVF, 41.0% of the cleaved embryos developed to the blastocysts (early; 7.6%, expanded; 22.9%, hatching; 4.6% and hatched; 5.9%). 2) When the embryos were exposed or vitrified to the freezing solution, the re-expansion of vitrified embryos (73.3%) was significantly lower than that of control and exposed embryos (100, 97.0%) (p<0.05). But the formation rate of hatching or hatched blastocysts of vitrified embryos (66.7, 46.7%) at 48h after thawing was similar to that of exposed embryos (66.7, 39.4%) but not control (100, 100%) (p<0.01). However, in the total cell numbers of those developed hatched blastocysts, there were not significantly different among the treatment groups. 3) When the embryo survival rates by different developmental stage were examined, the re-expansion was not different among the groups $(64.5{\sim}75.6%)$. After warming 48 h, the hatching and hatched formation of early blastocysts (25.8, 9.7%) was significantly lower than those of expanded (69.7, 39.4%) and hatching blastocysts (53.3, 43.3%) (p<0.05). 4) In addition, when the expanded blastocysts at day 7, 8 and 9 were vitrified, the re-expansion of day 8 and 9 embryos was significantly lower than that of day 7 (day 7; 93.9%, day 8; 75.8% and day 9; 87.5%) (p<0.05). However, the rates of development to hatched blastocysts were no difference among the groups (day 7; 36.4%, day 8; 36.4% and day 9; 31.3%). These results suggested that in vitro produced expanded or hatching blastocysts can be efficiently cryopreserved by the two-step vitrification method using EFS40.

• Journal of the Korean earth science society
• /
• v.30 no.6
• /
• pp.699-708
• /
• 2009

Recently as the interest in the development of domestic ore deposits has increased, we can easily find some studies on exploration geophysics-based ore-deposit survey in literature. Based on the fact that mineralized zone are generally more conductive than surrounding media, electrical resistivity survey among several geophysical surveys has been applied to investigate metallic ore deposits. Most of them are grounded on 2-D survey. However, 2-D inversion may lead to some misinterpretation for 3-D geological structures. In this study, we investigate the feasibility of the 3-D electrical resistivity survey to 3-D vein-type ore deposits. We first simulate 2-D dipole-dipole survey data for survey lines normal to the strike and 3-D pole-pole survey data, and then perform 3-D inversion. For 3-D ore-body structures, we assume a width-varying dyke, a wedge-shaped, and a fault model. The 3-D inversion results are compared to 2-D inversion results. By comparing 3-D inversion results for 2-D dipole-dipole survey data to 3-D inversion results for 3-D pole-pole survey data, we could note that the 2-D dipole-dipole survey data yield better inversion results than the 3-D pole-pole data, which is due to the main characteristic of the pole-pole array. From these results, we are convinced that if we have certain information on the direction of the strike, it would be desirable to apply 2-D dipole-diple survey for the survey lines normal to the strike. However, in most cases, we do not have any information on the direction of the strike, because we already developed the ore deposit with the outcrops and the remaining ore deposits are buried under the surface. In that case, performing 3-D pole-pole electrical resistivity survey would be a reasonable choice to obtain more accurate interpretation on ore body structure in spite of low resolution of pole-pole array.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.101-111
• /
• 2016

It is possible that aggregates add on to geopolymer based fly ash to mix mortar and concrete like cement. This is necessary to evaluate mineral composition, particle shape, surface, size distribution, density and absorption ratio for fine aggregates due to few detailed research to examine influence of fine aggregates properties on unhardened geopolymer concrete. In this research, used two different fine aggregates, Jumunjin sand(having quartz, mica, feldspar, pyroxene in mineral composition, more than 96% of total size between -0.60 and +0.30mm, angular shape and rough surface) and ISO sand(having almost all quartz in mineral composition, more than 51% size between -1.40 and +0.60mm, simultaneously varied size distribution, spherical shape and smooth surface). After an experimental result of the varied ratio of Si/Al=1.0-4.1 geopolymer paste, mix proportion respectively applied Si/Al=1.5 having the highest compressive strength to mortar and Si/Al=3.5 having the highest consistency to concrete. Geopolymer mortar by mixing with Jumunjin and ISO sand in varied range of 20-50wt.% showed flow size increase between 69.5 and 112.0mm, between 70.5 and 126.0mm respectively. Geopolymer concrete at an addition of 77wt.% of total aggregates ratio showed that average compressive strength was 32MPa and the consistency was favorable to molding. Since ISO sand observing varied size distribution, spherical shape, smooth surface, low absorption ratio resulted in advantageous properties on consistency of geopolymer, geopolymer concrete can be suitable for using the fine aggregates similar to ISO sand.

• Journal of the Korean Electrochemical Society
• /
• v.18 no.3
• /
• pp.121-129
• /
• 2015

The platinum anode for the electrolytic reduction process is generally surrounded by a nonporous ceramic shroud with an open bottom to offer a path for $O_2$ gas produced on the anode surface and prevent the corrosion of the electrolytic reducer. However, the $O^{2-}$ ions generated from the cathode are transported only in a limited fashion through the open bottom of the anode shroud because the nonporous shroud hinders the transport of the $O^{2-}$ ions to the anode surface, which leads to a decrease in the current density and an increase in the operation time of the process. In the present study, we demonstrate the electrolytic reduction of 1 kg-uranium oxide ($UO_2$) using the porous shroud to investigate its long-term stability. The $UO_2$ with the size of 1~4mm and the density of $10.30{\sim}10.41g/cm^3$ was used for the cathode. The platinum and 5-layer STS mesh were used for the anode and its shroud, respectively. After the termination of the electrolytic reduction run in 1.5 wt.% $Li_2O-LiCl$ molten salt, it was revealed that the U metal was successfully converted from the $UO_2$ and the anode and its shroud were used without any significant damage.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.4
• /
• pp.394-405
• /
• 2009

Statement of problem: Crestal bone loss, a common problem associated with dental implant, has been attributed to excessive bone stresses. Design of implant's transgingival (TG) part may affect the crestal bone stresses. Purpose: To investigate if concavely designed geometry at a dental implant's TG part reduces peri-implant bone stresses. Material and methods: A total of five differently configured TG parts were compared. Base model was the ITI one piece implant (Straumann, Waldenburg, Switzerland) characterized by straight TG part. Other 4 experimental models, i.e. Model-1 to Model-4, were designed to have concave TG part. Finite element analyses were carried out using an axisymmetric assumption. A vertical load of 50 N or an oblique load of 50 N acting at $30^{\circ}$ with the implant's long axis was applied. For a systematic stress comparison, a total of 19 reference points were defined on nodal points around the implant. The peak crestal bone stress acting at the intersection of implant and crestal bone was estimated using regression analysis from the stress results obtained at 5 reference points defined along the mid plane of the crestal bone. Results: Base Model with straight configuration at the transgingival part created highest stresses on the crestal bone. Stress level was reduced when concavity was imposed. The greater the concavity and the closer the concavity to the crestal bone level, the less the crestal stresses. Conclusion: The transgingival part of dental implant affect the crestal bone stress. And that concavely designed one may be used to reduce bone stress.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.11
• /
• pp.1528-1534
• /
• 2009

This study was designed to evaluate the anti-obesity and hypoglycemic effects of Gugija (Lycium chinense Mill) extracts in 3T3-L1 adipocytes. We investigated the $\alpha$-amylase and $\alpha$-glucosidase inhibitory activities of extracts from Gugija. Gugija was extracted by 70% EtOH and 80% MeOH and aqueous, respectively. A single oral dose of Gugija extract inhibited the increase of blood glucose levels significantly at 0, 30, 60, 90 and 120 min and decreased incremental response areas under the glycemic response curve. These results suggest that Gugija 70% EtOH extracts may delay carbohydrate digestion and reduce postprandial hyperglycemia. In addition, triglyceride content in 3T3-L1 adipocytes decreased at higher concentrations of Gugija 70% EtOH extract. Free fatty acid content in 3T3-L1 adipocytes was increased at higher concentrations of Gugija 70% EtOH extract. Also, glucose transporter 4 (GLUT4), the key insulin signaling pathway transcription factor, was remarkably increased by the Gugija 70% EtOH extract when compared to those of control cells in protein expression levels. Therefore, Gugija can be developed as an effective anti-obesity and hypoglycemic agent.