참고문헌
- Breton, D., Carles-Gibergues, A., Ballivy, G., Grandet, J. (1993). Contributions to the formation mechanism of the transition zone between rock cement paste, Cement Concrete Research, 23, 335-346. https://doi.org/10.1016/0008-8846(93)90099-U
- Chindaprasirt, P., Pre De Silva, Hanjitsuwan. (2014). Effect of high-speed mixing on properties of high calcium fly ash geopolymer paste, Arab Journal Science Engineering, 39(8), 6001-6007. https://doi.org/10.1007/s13369-014-1217-1
- Davidovits, J. (1994). Geopolymers: inorganic polymeric new materials, Journal Material Engineering, 16, 91-139.
- De Rooij, M.R. (2000). Syneresis in Cement Paste Systems, Ph.D Thesis, Delft University Press, The Netherlands.
- Duxson, P., Provis, J.L., Lukey, G.C., Van Deventer, J.S.J. (2007). The role of inorganic polymertechnology in development of green concrete, Cement and Conrete Research, 37, 1590-1597. https://doi.org/10.1016/j.cemconres.2007.08.018
- Duxson, P., Provis, J.L., Lukey, G.C., Mallicoat, S.W., Kriven, W.M., Van Deventer, J.S.J. (2005). Understanding the relationship between geopolymer composition, microstructure and mechanical properties, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 269, 47-58.
- Giaccio, G., Zerbino, R. (1998). Failure mechanism of concretecombined effects of coarse aggregates and strength level, Advanced Cement Based Materials, 7, 41-48. https://doi.org/10.1016/S1065-7355(97)00014-X
- Guo, X., Shi, H., A. Dick, W. (2010). Compressive strength and microstructural characteristics of class C fly ash geopolymer, Cement and Concrete Composites, 32, 142-147. https://doi.org/10.1016/j.cemconcomp.2009.11.003
- Hardjito, D., Wallah, S.E., Rangan, B.V. (2002). Research into engineering properties of geopolymer concrete, International Conference' Geopolymer 2002 - Turn Potential to Profit, Melbourne, Australia.
- Hardjito, D., Wallah, S.E., Sumajouw, D.M.J., Rangan, B.V. (2003). Properties of geopolymer concrete with fly ash as its source material, Concrete in The Third Millenium, The 21st Biennial Conference of The Concrete Institute of Australia.
- Hardjito, H., Rangan, R.V. (2005). Development and properties of low-calcium fly ash based geopolymer concrete, Research report GC1. Perth, Australia: Faculty of Engineering, Curtin University of Technology.
- Heyes, G.W., Kelsall, D.F., Stewart, P.S.B. (1973). Continuous grinding in a small wet rod mill Part I. Comparison with a small ball mill, Powder Technology, 7, 319-325. https://doi.org/10.1016/0032-5910(73)80043-9
- Joseph, B., Mathew, G. (2012). Influence of aggregate content on the behavior of fly ash based geopolymer concrete, Scientia Iranica A, 19(5), 1188-1194. https://doi.org/10.1016/j.scient.2012.07.006
- Kim, J.J., Moon, J.H., Youm, K.S., Lee, H.E., Lim, N.H. (2014). Analysis of microstructures in cement matrix of nanosilica blended concrete, The Korean Society for Railway, 1578-1581 [in Korean].
- Koh, K.T., Ryu, G.S., Yoon, G.W., Han, C.G., Lee, J.H. (2006). Influence of the type of fine aggregate on concrete properties, Journal of the Korea Concrete Institute, 18(4), 459-467 [in Korean]. https://doi.org/10.4334/JKCI.2006.18.4.459
- Lee, S., Jou, H.T., Chon, C.M., Kang, N.H., Cho, S.B. (2013). Developing and assessing geopolymers from Seochun pond ash with a range of compositional ratios, Journal of the Korea Ceramic Society, 50(2), 134-141 [in Korean]. https://doi.org/10.4191/kcers.2013.50.2.134
- Lee, S., Kang, N.H., Chon, C.M., Jou, H.T. (2014). Grinding effects of coal-fired pond ash on compressive strength of geopolymers, Journal of Korean Institute of Resources Recycling, 23(6), 3-11 [in Korean]. https://doi.org/10.7844/kirr.2014.23.6.3
- Lee, S., Seo, M.D., Kim, Y.J., Park, H.H., Kim, T.N., Hwang, Y., Cho, S.B. (2010). Unburned carbon removal effect on compressive strength development in a honeycomb briquette ash-based geopolymer, International Journal of Mineral, 97, 20-25. https://doi.org/10.1016/j.minpro.2010.07.007
- Lee, S.B., Lee, D.H., Jee, N.Y., Lee, L.H. (1997). Design of mix proportion for concrete with crushed sand by very fine sand and particle shape, Journal of the Architectural Institute of Korea, 13(5), 289-297 [in Korean].
- Lee, S.T., Choi, Y.C., Park, K.T., Seo, D.W., You, Y.J. (2014). Effect of steam curing on the properties of recycled aggregate concrete, Journal of the Korea Institute for Structural Maintenance and Inspection, 18(2), 99-107 [in Korean]. https://doi.org/10.11112/jksmi.2014.18.2.099
- Lee, W.K.W., Van Deventer, J.S.J. (2004). The interface between natural siliceous aggregates and geopolymers, Cement Concrete Research, 34(2), 195-206. https://doi.org/10.1016/S0008-8846(03)00250-3
- Lizcano, M., Gonzalez, A., Basu, S., Karen Lozano, Miladin Radovic. (2012). Effects of water content and chemical composition on structural properties of alkaline activated metakaolin-based geopolymers, Journal of the American Ceramic Society, 95(7), 2169-2177. https://doi.org/10.1111/j.1551-2916.2012.05184.x
- Mitsui, K., Li, A., Lange, D.A., Shah, S.P. (1994). Relationship between microstructure and mechanical properties of the paste-aggregate interface, ACI Materials Journal, 91(1), 30-39.
- Palomo, A., Grutzeck, M.W., Blanco, M.T. (1999). Alkali-activated fly ashes-a cement for the future, Cement Concrete Research, 29, 1323-1329. https://doi.org/10.1016/S0008-8846(98)00243-9
- Pourghahramani, P., Forssberg, E. (2006). Microstructure characterization of mechanically activated hematite using XRD line broadening, International Journal of Mineral Process, 79(2), 106-119. https://doi.org/10.1016/j.minpro.2006.02.001
- Rahier, H., Denayer, J.F., Van Mele, B. (2003). Low-temperature synthesized aluminosilicate glasses, Journal of Materials Science, 38, 3131-3136. https://doi.org/10.1023/A:1024733431657
- Rangan, R.V. (2007). Low-calcium fly-ash based geopolymer concrete. In: Nawy, E.G. editor. Concrete Construction Engineering Handbook, New York: CRC Press.
- Sanjay, K., Rakesh., K. (2011). Mechanical activation of fly ash: Effect on reaction, structure and properties of resulting geopolymer, Ceramics International, 37(2), 533-541. https://doi.org/10.1016/j.ceramint.2010.09.038
- Scrivenger, K.L., Bentur, A., Pratt, P.L. (1988). Quantitative characterization of the transition zone in high strength concretes, Advances in Cement Research, 1(4), 230-237. https://doi.org/10.1680/adcr.1988.1.4.230
- Shi, C., Fernandez, A.J., Palomo, A. (2011). New cements for the 21st century: The pursuit of an alternative to portland cement, Cement Concrete Research, 41, 750-763. https://doi.org/10.1016/j.cemconres.2011.03.016
- Steven, H.K., Beatrix, K., William, C.P. (2003). Design and Control of Concrete Mixtures, 14th ed., Portland Cement Association.
- Suber. (2004). Influence of Aggregate on the Microstructure of Geopolymer, Ph.D Thesis, Department of Applied Physics, Curtin University of Technology.
- Teixerira-Pinto, A., Fernandez, P., Jalali, S. (2002). Geopolymer manufacture and application - Main problems when using concrete technology, Geopolymers 2002 International Conference, Melbourne, Australia: Siloxo Pty. Ltd.
- Temuujin, J., Van Riessen, A., Mackenzie, K.J.D. (2010). Preparation and characterisation of fly ash based geopolymer mortars, Construction and Building Materials, 24, 1906-1910. https://doi.org/10.1016/j.conbuildmat.2010.04.012
- Temuujin, J., Williams, R.P., Van Riessen, A. (2009). Effect of mechanical activation of fly ash on the properties of geopolymer cured at ambient temperature, Journal of Materials Processing Technology, 209, 5276-5280. https://doi.org/10.1016/j.jmatprotec.2009.03.016
- Van Jaarsveld, J.G.S., Van Deventer, J.S.J. (1997). The potential use of geopolymeric materials to immobilize toxic metals: Part I. Theory and applications, Mineral Engineering, 10, 659-669. https://doi.org/10.1016/S0892-6875(97)00046-0
- Weng, L., Sagoe-Crentsil, K., Brown, T., and Song, S. (2005). Effects of aluminates on the formation of geopolymers, Material Science and Engineering: B, 117(2), 163-68. https://doi.org/10.1016/j.mseb.2004.11.008
- Williams, R.P., Van Riessen, A. (2010). Determination of the reactive component of fly ashes for geopolymer production using XRF and XRD, Fuel, 89, 3683-3692. https://doi.org/10.1016/j.fuel.2010.07.031
- Wong, Y.L., Lam, L., Poon, C.S., Zhou, F.P. (1999). Properties of fly ash-modified cement mortar-aggregate interfaces, Cement and Concrete Research, 29, 1905-1913. https://doi.org/10.1016/S0008-8846(99)00189-1
- Xu, A., Sarkar, S.L., Nilsson, L.O. (1993). Effect of fly ash on the microstructure of cement mortar, Materials and Structures, 26, 414-424. https://doi.org/10.1007/BF02472942
피인용 문헌
- Effect of Fillers on High Temperature Shrinkage Reduction of Geopolymers vol.25, pp.6, 2016, https://doi.org/10.7844/kirr.2016.25.6.73
- Effect of Foaming Agent Content on the Apparent Density and Compressive Strength of Lightweight Geopolymers vol.4, pp.4, 2016, https://doi.org/10.14190/JRCR.2016.4.4.363