• Korean Journal of Food Science and Technology
• /
• v.38 no.6
• /
• pp.751-755
• /
• 2006

Physicochemical properties of black rice flours (BRFs) produced under different milling conditions were investigated to explore their applications for various processed rice products. Moisture contents of BRFs after roll milling and subsequent hot-air drying or microwave drying were 10.3% and 14.4%, respectively. The BRFs with jet milling and subsequent hot-air drying or microwave drying showed moisture contents of 7.9% and 7.5%. Mean particle sizes of the BRFs obtained from roll milling, jet milling, and following air-classification were 150, 41.5, and 9.4 ${\mu}m$, respectively. Hunter L value and water soluble index (WSI) of BRFs increased with decreasing particle size, while Hunter a value decreased. Total polyphenol contents of 91.4-115.8 mg/100 g and total amino acids of 75.0-96.4 mg/100 g in three types of BRFs were higher as compared to those (6.3 mg/100 g and 30.5 mg/100 g) of polished rice flour (PRF). Physicochemical properties such as moisture content, color parameter, and WSI have close relationship with the particle size of BRFs prepared under different milling conditions.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.11
• /
• pp.1742-1748
• /
• 2014

This study investigated the quality characteristics of commercial rice flour (CRF) and rice flours prepared by different milling methods for sulgidduk. For particle distribution, dried rice flour after the 1st roll mill using a pin mill showed a particle size of greater than $710{\mu}m$, whereas a particle size less than $250{\mu}m$ accounted for 48% of whole rice flour. This proportion was higher than CRF after the 2nd step roll mill. Crude protein, lipid, and ash contents were significantly highest in 1st roll mill samples. For color, roll & pin made up of many small particles showed a high L value. CRF and roll & pin showed significantly higher starch damage and water-holding capacity, whereas pasting temperature, peak viscosity, and setback of RVA pasting characteristics were lower than 1st roll mill. When rice cakes were made from three kinds of rice flour, roll & pin was not significantly different compared to the CRF. However, rice cakes made with 1st roll milled rice flour showed rough crumb and crust. Rice cake made with roll & pin or CRF showed similar characteristics for texture. In the quantitative descriptive analysis, rice cake made with roll & pin showed better appearance, flavor, taste, texture, and overall acceptability than CRF and 1st roll mill. Therefore, rice flour prepared by roll & pin could be applied to sulgidduk with high quality.

• Journal of the Korean Chemical Society
• /
• v.16 no.3
• /
• pp.193-199
• /
• 1972

Bentones from Korean bentonites were first prepared by reacting bentonites with high molecular weight imidazolines. The cation exchange capacity of bentonites was found more than 100meq/100g sample. Greases were then prepared by dispersing bentones into a lubricating oil and milling through a three-roll dispersion mill. Consistency in microscale, oxidation stability (static), water resistance, and wear property of the greases were tested by the ASTM methods, and good experimental results were obtained.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.40 no.12
• /
• pp.1797-1801
• /
• 2011

Two brown rice samples differing in amylose content, 20.1 (normal) and 7.3% (low amylose) were milled by different milling methods, and their physicochemical properties were tested. Particle size of brown rice flour prepared by dry milling using a pin mill (DM) was lower than that prepared by wet milling using a roll mill (WM). Particle size was further reduced by successive dry milling of the flour after wet milling and drying (WM/DM). Damaged starch contents in the wet milled brown rice flour were 14.6 and 15.6% for the normal and low amylose samples, respectively, whereas they were only 4.2 and 4.8% for the dry milled samples. WM/DM method resulted in a lower damaged starch (%) than DM, despite a reduced flour particle size. Water absorption index (WAI) of the brown rice flour was the lowest after WM/DM, and the water solubility index (WAI) was higher in the order of DM, WM/DM, and WM. Brown rice flour with normal amylose content appeared to have significantly higher pasting viscosities, as determined using a Rapid Visco Analyzer (RVA). Compared to dry milled brown rice flour, wet milled brown rice flour showed lower peak viscosity and higher final viscosity, resulting in increased setback value.

• Korean Journal of Food Science and Technology
• /
• v.38 no.4
• /
• pp.495-500
• /
• 2006

The physicochemical properties of brown rice flours produced under different drying and milling conditions were investigated. Moisture contents of hot-air dried, microwave dried and zet-milled brown rice flours (BrWZH) were 10.7%,13.7% and 8.0%-8.6%, respectively. Water absorption indices (WAI) and water soluble indices (WSI) of roll-milled brown rice flours (BrWRH) were lower (0.40-0.59 g/g; 0.7-3.0%) than those of zet-milled brown rice flours (0.58-0.79 g/g; 4.0-7.3%). Zet-milled brown rice flours had higher Hunter L values and more damaged starch (94.1-96.8; 28.2%) compared to roll-milled brown rice flours (91.3-91.9: 15.5%). The percentage of damaged starch and L values of brown rice flours increased as particle size of brown rice flours decreased. Roll-milled polished rice flour (Control) had the highest L value and lowest amount of damaged starch (97.1; 8.2%). Control, BrWRH, BrWZH, and ultrafine brown rice flour (HBrZMU) had peak viscosity values of 321, 255, 221, and 162 RVU, respectively and trough viscosity values of 217, 185, 175, and 113 RVU, respectively. Peak and trough viscosity (Rapid Visco Analyzer; RVA) properties of rice floors decreased as the particle size of rice flours decreased. HBrZMU demonstrated a higher onset temperature $(61.1^{\circ}C)$ compared to control $(54.8^{\circ}C)$ by differential scanning calorimetric (DSC). Crystal melting enthalpy $({\Delta}H)$ of control and brown rice flours were 10.4 J/g and 6.1-8.7 J/g, respectively. Results of this study suggested that physicochemical properties of brown rice flours were closely related to their particle size.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.463-464
• /
• 2006

광산업 및 디스플레이 산업의 발전에 따라 관련 제품의 핵심 부품 및 소재 개발이 매우 중요하게 대두되고 있다. 전계방출 소자 및 back light가 되는 나노 발광체의 핵심소재중 하나인 CNT paste는 국내외에서 연구가 진행중이다. 본 연구에서는 메탄올속에서 초음파를 이용하여 분산시킨 CNT 분말, 유기 바인더, 용매, glass frit, Ag powder 등을 사용하여 paste를 만들고, TGA(Thermogravimetric Analyzer)와 SEM(Scanning Electron Microscopy) 분석에 의해 제조 공정의 최적화를 실시하였다.

• Journal of the Microelectronics and Packaging Society
• /
• v.23 no.4
• /
• pp.125-133
• /
• 2016

With the aim of using a filler material in a conductive paste, fine Cu nanoparticles were synthesized through the high-speed chemical reaction between cuprous oxide ($Cu_2O$) powder and sulfuric acid in distilled water. Under external temperature of $7^{\circ}C$, sulfuric acid concentration of 48%, and $Cu_2O$ amount of 30 g, the $Cu_2O$ particles were eliminated and slightly aggregated Cu nanoparticles were synthesized. Futhermore, Cu nanoparticles of 224 nm, in which the aggregation between particles was obviousiy much suppressed, were synthesized with the choice of an additive. In the particle sample, occasionally there are coarse particles formed by the aggregation of fine nanoparticles and weak linkages between the nanoparticles. However, the coarse particles were destroyed and the linkages were broken after mixing with a resin formulation, indicating the behavior of untangling the aggregation between nanoparticles.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.46 no.2
• /
• pp.139-146
• /
• 2013

Surimi products are among the most prominent seafoods in Korea. Together with fish meat, wheat flour is a major ingredient in the preparation of surimi products. Rice flour, however, can be an effective ingredient in enhancing the rheological characteristics of surimi products. In this study, we evaluated the potential of rice flour as an agent to replace wheat flour in surimi products. The effects of rice flour milling types and addition methods on the rheological and sensory properties of surimi products were investigated. Among different addition methods, the surimi product containing non-treated rice flour showed better gel strength and sensory properties than products containing paste (1:1.3 rice flour/water, w/v) and steamed paste (steamed at $100^{\circ}C$ for 30 min). According to the gel strength results for surimi products with added roll-mill (40 mesh) and jet-mill (180 mesh) rice flours, the roll-mill rice flour shows good potential as a replacement for wheat flour. When considering gel strength and sensory properties, an effective amount of rice flour to add was 10-15% (w/w). In conclusion, the rheological and sensory properties of surimi products containing rice flour were comparable with those of a premium commercial surimi product. Therefore, rice flour might be an effective alternative to wheat flour for premium surimi products.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.2
• /
• pp.115-121
• /
• 2003

A new Layered Manufacturing(LM) system, named PaperMill, is developed applying micro milling technology. A micro endmill(127 11m in diameter) is introduced as the cutter of build material. The selected build material for this system is an adhesive-coated paper roll which provides advantages such as good bonding between layers, machinability, and low material cost. A 3-axis CNC controller and three step-motors are used for the movement of X-Y-Z table of the system. For simplicity of the control of mechanism, the control system for feeding the paper roll is uncoupled from CNC controller. Two code converters are developed for the toolpath generation of the new LM system. The NC converter generates a set of NC codes for PaperMill using commercial CAM software while the SML converter generates an NC code from Quickslice's SML format. The NC codes generated from the converters consist of a series of profile data and trigger code for paper feeding. Two sample gears were fabricated to prove the concept of the system, which shown that the dimensional errors of the fabricated gears is under 3.4 percent.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 1999.07a
• /
• pp.234-239
• /
• 1999

고추는 대부분 건고추를 굵은 고춧가루, 보통 고춧가루, 고운 고춧가루로 분쇄하여 김치류, 고추장 등의 발효식품과 양념류에 주로 사용되고 있으며, 국민 일인당 연간 소비량은 고춧가루를 기준으로 2.5kg, 건고추를 기준으로 3.5kg에 이르고 있다. 건고추를 가루로 분쇄하는 방법은 종래 절구로 찧어 빻는 방법에서 생산성을 높이기 위하여 1960년대 중반부터 국내 특유의 압축식 롤 밀(Roll Mill)형태의 분쇄방법으로 전환되었으며, 구미의 햄머 밀이나 디스크 밀에 의한 분쇄방법과는 차이가 있다. 이것은 소비형태에 의한 차이로서 우리는 발효식품의 숙성을 위하여 고춧가루의 수축복원력을 향상시키는 방법으로 고추과피의 섬유질을 압축력과 전단력을 이용하여 분쇄하는 형태인 반면에, 구미에서는 고춧가루를 단순히 조미향신료의 첨가제로 사용하는 차이점 때문이다. (중략)