• Smart Structures and Systems
• /
• v.16 no.5
• /
• pp.759-780
• /
• 2015

Based on the theory of piezoelasticity, the static performance of a piezoelectric bilayer cantilever fully covered with electrodes on the upper and lower surfaces is studied. Three models are considered, i.e., the sensor model, the driving displacement model and the blocking force model. By establishing suitable boundary conditions and proposing an appropriate Airy stress function, the exact solutions for piezoelectric bilayer cantilevers are obtained, and the effect of ambient thermal excitation is taken into account. Since the layer thicknesses and material parameters are distinguished in different layers, this paper gives unified solutions for composite piezoelectric bilayer cantilevers including piezoelectric bimorph and piezoelectric heterogeneous bimorph, etc. For some special cases, the simplifications of the present results are compared with other solutions given by other researches based on one-dimensional constitutive equations, and some amendments have been found. The present investigation shows: (1) for a PZT-4 piezoelectric bimorph, the amendments of tip deflections induced by an end shear force, an end moment or an external voltage are about 19.59%, 23.72% and 7.21%, respectively; (2) for a PZT-4-Al piezoelectric heterogeneous bimorph with constant layer thicknesses, the amendments of tip deflections induced by an end shear force, an end moment or an external voltage are 9.85%, 11.78% and 4.07%, respectively, and the amendments of the electrode charges induced by an end shear force or an end moment are both 1.04%; (3) for a PZT-4-Al piezoelectric heterogeneous bimorph with different layer thicknesses, the maximum amendment of tip deflection approaches 23.72%, and the maximum amendment of electrode charge approaches 31.09%. The present solutions can be used to optimize bilayer devices, and the Airy stress function can be used to study other piezoelectric cantilevers including multi-layered piezoelectric cantilevers under corresponding loads.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.22 no.3
• /
• pp.267-275
• /
• 2009

This paper presents the p-convergent coupling element on the basis of the ESSE(equivalent single layer shell element) and the PLLE(partial-linear layerwise element) to analyze laminated composite plates. The ESSE is formulated by the degenerated shell theory, on the other hand, the assumption of the PLLE is piecewise linear variation of the in-plane displacement and a constant value of lateral displacement across the thickness. The proposed finite element model is based on p-convergence approach. The integrals of Legendre polynomials and Gauss-Lobatto technique are chosen to interpolate displacement fields and to implement numerical quadrature, respectively. This study has been focused on the verification of p-convergent element. For this purpose, various finite element multiple models associated with the combination of ESSE and PLLE elements are tested to show numerical stability. The simple examples such as a cantilever beam subjected vertical load and a plate with tension are adopted to evaluate the performance of proposed element.

• The Journal of Engineering Geology
• /
• v.6 no.1
• /
• pp.33-43
• /
• 1996

In this study, hypocentor parameters of some local and regional earthquakes and explosions, including focal depth and origin time, were redetermined by using a single station of three-component. We attempt to do the job by the combination of polarization analyses, by which azimuths and trial epicenters of earthquakes can be figured out, and a layered constant velocity model, on the basis of which theoretical travel times can be computed to match a series of input seismic phases of the event. Magnitudes were determined by using coda duration. Results, which correspond to the least misfit, showed that the average focal depth of all earthquakes in this study is around 15km, which fits well to that by investigation (Kang and Choi, 1993).

• Information Systems Review
• /
• v.8 no.1
• /
• pp.43-61
• /
• 2006

Evaluating ubiquitous computing services is important for the commercialization of the ubiquitous services which will be running on electronic markets. However, despite its importance and usefulness, assessing ubiquitous computing services is still in its early stage. Moreover, sufficient study of making a distinction what are 'ubiquitous computing services' or not has not been provided yet. Hence, this paper aims to propose an integrated methodology to assess the ubiquitous computing services. A multilayered approach is considered to assess not only technical but also behavioral perspectives. To show the feasibility of the assessment model, three use cases are studied and evaluated.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.14 no.3
• /
• pp.495-508
• /
• 1994

A backcalculation procedure to determine the layer moduli of flexible pavement structure is developed using matrix solution technique. Forward calculation computer program adopted in this backcalculation procedure is SINELA which is one of layered elastic computer programs. Data base system is used as a tool for setting initial seed moduli and depth to virtual bedrock in backcalculation procedure. The validity and applicability of the proposed backcalculation procedure are verified through various numerical model tests. From the results of comparison analysis with FPEDD1, it is found that the proposed procedure gives more efficient and accurate results.

• Journal of information and communication convergence engineering
• /
• v.6 no.3
• /
• pp.255-260
• /
• 2008

In the recently years, there has been a big interest in ad hoc wireless network as they have tremendous military and commercial potential. An Ad hoc wireless network is composed of mobile computing devices that use having no fixed infrastructure of a multi-hop wireless network formed. So, the fact that limited resource could support the network of robust, simple framework and energy conserving etc. In this paper, we propose a new ad hoc multicast routing protocol for based on the ontology scheme called inference network. Ontology knowledge-based is one of the structure of context-aware. And the ontology clustering adopts a tree structure to enhance resilient against mobility and routing complexity. This proposed multicast routing protocol utilizes node locality to be improve the flexible connectivity and stable mobility on local discovery routing and flooding discovery routing. Also attempts to improve route recovery efficiency and reduce data transmissions of context-awareness. We also provide simulation results to validate the model complexity. We have developed that proposed an algorithm have design multi-hierarchy layered networks to simulate a desired system.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.5
• /
• pp.182-189
• /
• 2002

This paper presents a framework of hybrid dynamic control systems for the motion control of wheeled mobile robot systems with nonholonomic constraints. The hybrid control system has the 3-layered hierarchical structure: digital automata for the higher process, mobile robot system for the lower process, and the interface as the interaction process between the continuous dynamics and the discrete dynamics. In the hybrid control architecture of mobile robot, the continuous dynamics of mobile robots are modeled by the switched systems. The abstract model and digital automata for the motion control are developed. In high level, the discrete states are defined by using the sensor-based search windows and the reference motions of a mobile robot in low level are specified in the abstracted motions. The mobile robots can perform both the motion planning and autonomous maneuvering with obstacle avoidance in indoor navigation problem. Simulation and experimental results show that hybrid system approach is an effective method for the autonomous maneuvering in indoor environments

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.3
• /
• pp.11-20
• /
• 1988

A general finite element method is developed to analyze reinforced concrete plates under dead loads and monotonically increasing live loads. This method can be used to trace the load-deformation response and crack propagation through elastic, inelastic and ultimate ranges. The internal concrete and steel stresses can also be determined for any stage of the response history. A layered 8 node isoparametric element taking account of coupling effect between the membrane and the bending action is developed. An incremental tangent stiffness method is used to obtain a numerical solution. Validity of the method is studied by comparing the numerical solutions with other results.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.1
• /
• pp.70-76
• /
• 2008

Periodic cellular metals (PCMs) are actively being investigated because of their excellent specific strength and stiffness, and multi-functionality such as a heat disperse structure bearing external loading. The Kagome truss PCM has been proved that it has higher resistance to plastic buckling and lower anisotropy than other truss PCMs. In this paper, the out-of-plane compressive responses of the WBK specimens have been measured, theoretically predicted and numerically analyzed. Three specimens of two-layered WBK are fabricated and tested for measuring the responses. The peak stress of compressive behavior and effective elastic modulus are predicted based on the equilibrium equation and elastic energy conservation. Moreover, the structure of the specimen is modeled using the commercial mesh generation code, PATRAN and the finite element analysis for the model under the compression is carried out using the commercial FE code, ABAQUS. Finally, the obtained results are compared with each other to analyze the compressive characteristics of Wire-woven Bulk Kagome (WBK).

• Journal of Information Technology Applications and Management
• /
• v.16 no.3
• /
• pp.29-43
• /
• 2009

The advancement of emerging technologies can create more national value, and this motivates many nations to invest their resources in the emerging technologies. However, due to limited financial and human resources, even a wealthy nation cannot afford to randomly invest its resource in all profitable technologies. Therefore, cautious appraisal and prioritization of the competitive technologies should be conducted first, and then concentrated investment should be done for only the selected technologies. In this study, we propose a quantitative criterion for prioritizing the targeted electronic device technologies. The prioritization scheme devised in this study consists of a growth layer, a profitability layer, a vitality layer, and an influence layer. The proposed model forecasts the most promising technologies by applying the revised version of the Analytic Hierarchy Process (AHP). We performed empirical experiments on 12 emerging electronic device technologies to analyze the practical applicability of our study. The experimental data was obtained from 70 experts in high-tech industry as a part of the 2004 Prioritization and Selection project that was carried out in South Korea. As a result, the proposed scheme was able to present the most promising areas for investment in the field of electronic device technology.