Transactions of the Korean Society of Mechanical Engineers A (대한기계학회논문집A)

The Korean Society of Mechanical Engineers (대한기계학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of Compressive Characteristics of Wire-woven Bulk Kagome

Wire-woven Bulk Kagome의 압축 특성 분석

  • 이병곤 (전남대학교 대학원 기계공학과) ;
  • 최지은 (전남대학교 자동차연구소) ;
  • 강기주 (전남대학교 기계시스템공학부) ;
  • 전인수 (전남대학교 기계시스템공학부)
  • Published : 2008.01.01
Download PDF
⟨ Previous Next ⟩

Abstract

Periodic cellular metals (PCMs) are actively being investigated because of their excellent specific strength and stiffness, and multi-functionality such as a heat disperse structure bearing external loading. The Kagome truss PCM has been proved that it has higher resistance to plastic buckling and lower anisotropy than other truss PCMs. In this paper, the out-of-plane compressive responses of the WBK specimens have been measured, theoretically predicted and numerically analyzed. Three specimens of two-layered WBK are fabricated and tested for measuring the responses. The peak stress of compressive behavior and effective elastic modulus are predicted based on the equilibrium equation and elastic energy conservation. Moreover, the structure of the specimen is modeled using the commercial mesh generation code, PATRAN and the finite element analysis for the model under the compression is carried out using the commercial FE code, ABAQUS. Finally, the obtained results are compared with each other to analyze the compressive characteristics of Wire-woven Bulk Kagome (WBK).

Keywords

References

  1. Deshpande, V.S., Fleck, N.A. and Ashby, M. F., 2001, 'Effective Properties of the Octet-Truss Lattice Material,' J. Mechanics and Physics of Solids, Vol. 49, pp. 1747-1769 https://doi.org/10.1016/S0022-5096(01)00010-2
  2. Deshpande, V. S. and Fleck, N. A., 2001, 'Collapse of Truss Core Sandwich Beams in 3-Point Bending,' Int J. of solids and structures, Vol. 38, pp. 6275-6305 https://doi.org/10.1016/S0020-7683(01)00103-2
  3. Chiras, S., et al., 2002, 'The Structural Performance of Near-Optimized Truss Core Panels,' Int. J. Solids and Sturctures, Vol. 39, pp. 4093-4115 https://doi.org/10.1016/S0020-7683(02)00241-X
  4. Zupan, M., Deshpande, V. S., Fleck, N. A., 2004, 'The Out-of-Plane Compressive Behaviour of Woven-Core Sandwich Plates,' Euro J Mech A/Solids, Vol. 23, pp. 441-421 https://doi.org/10.1016/j.euromechsol.2004.01.007
  5. Queheillalt, D. T. and Wadley, H. N. G., 2005, 'Pyramidal Lattice Truss Structures with Hollow Trusses,' Materials Science and Engineering A, Vol. 397, pp. 132-137 https://doi.org/10.1016/j.msea.2005.02.048
  6. Hyun, S., Karlsson, A. M., Torquato, S. and Evans, A. G., 2003, 'Simulated Properties of Kagome and Tetragonal Truss Core Panel,' Int. J. Solids and Structures, Vol. 40, pp. 6989-6998 https://doi.org/10.1016/S0020-7683(03)00350-0
  7. Wang, J. , Evans, A. G., Dharmasena, K. and Wadley, H. N. G., 2003, 'On the Performance of Truss Panels with Kagome Cores, ' Int. J. Solids and Structures, Vol 40, pp. 6981-6988 https://doi.org/10.1016/S0020-7683(03)00349-4
  8. Lee, Y. H., Choi, J. E., Jeon, I. and Kang, K. J., 2007, 'A New Method to Fabricate Bulk PCMs from Continuous Wires and the Mechanical Behaviors, ' J. of the Korean Society of Mechanical Engineers, Vol. A-31, pp. 245-252 https://doi.org/10.3795/KSME-A.2007.31.2.245
  9. Lee, Y. H., Lee., B. K., Jeon, I. and Kang, K. J., 2007, 'Wire-Woven Bulk Kagome (WBK) truss cores, ' Acta Materialia, in press https://doi.org/10.1016/j.actamat.2007.07.023
  10. Ugural, A. C. and Fenster, S. K., 2003, 'Advanced Strength and Applied Elasticity , 4th Ed,' Prentice-Hall
  11. Shanley, F. R., 1967, 'Mechanics of Materials,' NewYork, McGraw-Hill
  12. Rasmussen, K. J. R., 2003, 'Full-range stress-strain curves for stainless steel alloys,' J. of Constructional Steel Research, Vol. 59, pp. 47-61 https://doi.org/10.1016/S0143-974X(02)00018-4
  13. Jeon, I. and Asahina, T., 2005, 'The Effect of Structural Defects on the Compressive Behavior of Closed-Cell Al Foam,' Acta Materialia, Vol. 53, pp. 3415-3423 https://doi.org/10.1016/j.actamat.2005.04.010