• 한국콘텐츠학회논문지
• /
• 제15권1호
• /
• pp.308-315
• /
• 2015

본 연구는 3D 프린터를 이용하여 통풍이 원활하고 위생적이며 선명한 방사선영상을 구할 수 있는 그물형 손목 부목을 제작하고자 하였다. 스캐너는 의료용 다중단층영상장치(MDCT)를 이용했으며, 3D 프린터 기기는 용융 적층 조형술(fused deposition modeling, FDM)의 프린팅 방식을 이용했다. 소재는 분해성 플라스틱 (poly lactic acid, PLA)을 사용하였다. 손목의 3 차원 볼륨렌더링은 MDCT에서 획득된 단층영상으로 구현하였다. 구현된 손목 3 차원 영상을 바탕으로 가상의 그물형 부목 모형을 디자인하고 출력하였다. 그 결과 3D 프린터로 출력된 부목이 기존 부목보다도 우수한 방사선 손목영상을 획득할 수 있었으며 가려움증 및 비위생적인 단점을 개선하고 부목 해체 작업이 용이하였다. 결론적으로 본 연구에서 모델링된 3D 부목 모형은 향후 3D 프린팅 부목 제작에 기초자료로 활용할 수 있으며 환자들의 실생활에 도움을 줄 것으로 기대한다.

• 지구물리와물리탐사
• /
• 제11권3호
• /
• pp.221-229
• /
• 2008

최근 자원개발 분야에서는 다양한 자료를 3차원 공간 데이터베이스로 구성하여 매장량, 품위 분포 등 경제성 평가에서부터 광산설계, 채굴계획 수립 및 가행단계의 공정관리 등 광산개발의 전주기에 대한 3차원 모델링 기법에 널리 활용하고 있다. 자원개발 분야와 토목분야에서 물리탐사는 현지 여건, 기술적, 경제적 제한 때문에 대부분 2차원 단면에 대한 탐사를 주로 하고 있다. 현장에서 획득된 탐사 자료는 2차원 가정을 전제로 한 2차원 역산을 통해 지하 매질의 물성 분포를 계산하는데 이용된다. 그러나 실제로 획득된 자료는 3차원 공간에서의 지하 매질의 반응이므로, 2차원 역산의 결과는 3차원 지형 정보와 지질구조, 시추조사 결과 등과 같은 부가적인 정보를 고려하여 종합적으로 해석함으로써 2차원 가정에 의한 오류를 최소화하고 실제 지하 매질의 특성을 파악할 수 있다. 이 연구에서는 토목 및 자원개발 분야에서 수행된 물리탐사 자료에 대하여 3차원 지반 모델링 기법을 적용한 사례 연구를 통해 3차원 지반 모델링 기법의 활용성과 다양한 적용 가능성을 검토하였다.

• 한국의류학회지
• /
• 제42권3호
• /
• pp.503-515
• /
• 2018

In this research, the three-dimensional structural and colorimetrical modeling of yarn-dyed woven fabrics was conducted based on the Kubelka-Munk theory (K-M theory) for their accurate color predictions. In the K-M theory for textile color formulation, the absorption and scattering coefficients, denoted K and S, respectively, of a colored fabric are represented using those of the individual colorants or color components used. One-hundred forty woven fabric samples were produced in a wide range of structures and colors using red, yellow, green, and blue yarns. Through the optimization of previous two-dimensional color prediction models by considering the key three-dimensional structural parameters of woven fabrics, three three-dimensional K/S-based color prediction models, that is, linear K/S, linear log K/S, and exponential K/S models, were developed. To evaluate the performance of the three-dimensional color prediction models, the color differences, ${\Delta}L^*$, ${\Delta}C^*$, ${\Delta}h^{\circ}$, and ${\Delta}E_{CMC(2:1)}$, between the predicted and the measured colors of the samples were calculated as error values and then compared with those of previous two-dimensional models. As a result, three-dimensional models have proved to be of substantially higher predictive accuracy than two-dimensional models in all lightness, chroma, and hue predictions with much lower ${\Delta}L^*$, ${\Delta}C^*$, ${\Delta}h^{\circ}$, and the resultant ${\Delta}E_{CMC(2:1)}$ values.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2008년도 학술발표회 논문집
• /
• pp.449-453
• /
• 2008

This research focused on analyzing and comparing between the results of hydraulic physical modeling and the results of numerical modeling of Grass Concrete which is newly developed in-situ block system. The physical model was built as a scale of 1:50 by Froude similitude measuring the water levels and the water velocities for before and after vegetation and the effects were analyzed after reviewing the results. In consequence, the water velocities were observed to decrease meanly 19.1%, and the water depth were determined to increase meanly 27.8% in case of the of design flood, $Q=200m^3/sec$. Moreover, the velocities were produced reduction effects of 27.2%, and the water levels were derived from addition effects of the highest 31.3% in case of the probability maximum flood(PMF), $Q=600m^3/sec$. To verifying the hydraulic physical modeling, the numerical modeling was conducted for a close examination of before and after vegetation. HEC-RAS model was for 1 dimensional numerical analysis and RMA-2 was for 2 dimensional numerical analysis. The results of the numerical simulation, under the condition of roughness coefficient calibration, shows similar results of the physical modeling. These satisfactory results show that the accomplished results of hydraulic modeling and the predicted results of numerical modeling corresponded reasonably each others.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.170.2-170
• /
• 2001

In this paper, the dynamic system modeling and the state sensitivity analysis of the spin-coater system for the reduction of the vibration are proposed. In the respect of modeling, the spin-coater system is composed of components of servomotor, belt, spindle, and a supported base. Each component is defined and combined modeling is derived to 3dimensional equations. Verification of modeling is verified by experimental values of actual system in the frequency domain. By direct differentiation the constraint equations with respect to kinematic design variables, such as eccentricity of spindle, moment of inertia, torsional stiffness and damping of supported base, sensitivity equations are derived to the verified state equations. Sensitivity of design variables could be used for vibration reduction and natural frequency shift in the frequency domain. Finally, dominant design variables ...

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.870-874
• /
• 2004

This paper presents a three dimensional modeling and simulations of operation and running of a wheel loader using the ADAMS program. A wheel loader consists of a bucket, a boom, a crank, a front frame, a rear frame, a bucket cylinder, two boom cylinders, two steering cylinders, nine spherical joints, six universal joints, five translation joints, three inline joints, a revolute and a fixed joint. Judging from the actual degrees of freedom of the wheel loader, proper kinematic joints are selected to exclude redundant constraints in the modeling. Through the running simulation over a bump with the three dimensional modeling, the joint reaction forces are calculated.

• 한국CDE학회논문집
• /
• 제10권6호
• /
• pp.381-391
• /
• 2005

The design methodology of injection molding die has been changed from two-dimensional drafting to three-dimensional solid modeling, which is due to many advantages over the conventional methodology in terms of design modification and data associativity. In addition to the solid modeling capability, it is required for a mold designer to utilize a database management system that facilitates efficient mold design. In the paper presented is the implementation of a software program which automatically generates three-dimensional mold-bases including standard parts and slider parts, conforming to given geometric constraints. It is based on a commercial CAD system (Unigraphics NX) along with related API (application program interface) libraries. The research is expected to reduce design efforts and simplify construction of a complex three-dimensional mold-base model that is comprised of standard parts and slider parts, by use of the three-dimensional database and automatized geometric dimensioning.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.1463-1466
• /
• 2003

Korean tank has been used from the end of 1980's. Even though Korean tank is regarded as the tank which is made in Korea, a lot of parts still need to be imported from abroad. Therefore, the localization for the parts of Korean Tank is necessary to be set free from the rate of dependence on imports. In this research, one of the most important part of Korean Tank, Lever, was considered to carry out localization. For the first step, two dimensional drawing and three dimensional modeling of the Lever was done. Secondly, the stress analysis was carried out for Lever and it is shown that the predictions of the proposed modeling are in very good agreement with the expected results.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.209-217
• /
• 2003

In this paper, the dynamic system modeling and the state sensitivity analysis of the spin-coater system are proposed for the reduction of the vibration. In the respect of modeling, the spin-coater system is considered to be composed of servomotor, spindle, supporting base and so on. Each component of model is combined and derived to 3 dimensional equations. The combined model is verified by experimental values of actual system in the frequency domain. By direct differentiation of the constraint equations with respect to kinematic design variables, such as eccentricity of spindle, moment of inertia, rotational stiffness and damping of supported base, sensitivity equations are derived to the verified state equations. Sensitivity of design variables could be used for vibration reduction and natural frequency shift in the frequency domain. Finally, dominant design variables are selected from the sensitivity analysis.

• 보존과학회지
• /
• 제37권1호
• /
• pp.25-33
• /
• 2021

To extend the application of digital technology to the replication of artifacts, meticulous details of the process and the diversity of three-dimensional (3D) printing output materials need to be supplemented. Thus, in this study, a bronze mirror with Hwangbichangcheon inscription was digitalized by 3D scanning, converted into a voxel model, and virtual conservation treatment was performed using a haptic device. Furthermore, the digital mold of the bronze mirror completed by Boolean modeling was printed using a 3D sand-printer. Such contactless replication based on digital technology reflects the stability, precision, expressivity, collectivity, durability, and economic feasibility of artifacts. Its application can be further extended to cultural products as well as such areas as education, exhibition, and research. It is expected to be in high demand for metal artifacts that require casting. If empirical studies through experimental research on casting are supplemented in the future, it could extend the application of digital technology-based contactless replication methods.