• Journal of Electrical Engineering and Technology
• /
• 제3권3호
• /
• pp.385-390
• /
• 2008

For taking account of the two-dimensional magnetic properties of a grain-oriented electrical steel sheet, the effective anisotropic tensor reluctivity is examined, and a computationally efficient algorithm is suggested by using the response surface method to model the two-dimensional magnetic properties. It is shown that the reconstructed two-dimensional magnetic properties are fairly effective to stabilize the convergence characteristics of the Newton-Raphson iteration in the nonlinear magnetic field analysis.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제15권1호
• /
• pp.57-65
• /
• 2011

In this paper, a good quality mesh generation for the finite element method is investigated for artificial hip joint simulations. In general, bad meshes with a large aspect ratio or mixed elements can give rise to excessively long computational running times and extremely high errors. Typically, hexahedral elements outperform tetrahedral elements during three-dimensional contact analysis using the finite element method. Therefore, it is essential to mesh biologic structures with hexahedral elements. Four meshing schemes for the finite element analysis of an artificial hip joint are presented and compared: (1) tetrahedral elements, (2) wedge and hexahedral elements, (3) open cubic box hexahedral elements, and (4) proposed hexahedral elements. The proposed meshing scheme is to partition a part before seeding so that we have a high quality three-dimensional mesh which consists of only hexahedral elements. The von Mises stress distributions were obtained and analyzed. We also performed mesh refinement convergence tests for all four cases.

• 한국군사과학기술학회지
• /
• 제6권4호
• /
• pp.63-72
• /
• 2003

This paper deals with the analysis of composite sabot of APFSDS projectile. Unlike conventional composite parts, the sabot is composed of thick-sectioned lamination, and thus requires 3-dimensional properties in the analysis. In this study, a model was formulated to calculate the equivalent composites properties. The equivalent properties were then used in the finite element analysis and the results were compared with those by the full 3-dimensional analysis with ply-by-ply modeling. The results generally agreed with each other in the bound of 20% error, indicating that the formulated model produced the equivalent properties with reasonable accuracy. It was thought to be an efficient approach to use the model in global analysis and then perform the full 3-dimensional analysis in regions of interest for detailed evaluation in designing the composite sabot structure.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.174-177
• /
• 2000

In this paper, The bulging behavior of the solidified shell in continuously cast slabs have been numerically analyzed using three-dimensional elasto-plastic and creep finite element method Three-dimensional model has been applied in order to investigate the effect of the narrow face shell on restraining the bulging deflection. Solidification analysis are carried out by two-dimensional finite difference method. In this way, strains occurring at the solidification front near the narrow face of the slab, as well as those occurring in the board face have been computed. The adequacy of the model has been checked against the experimental results. In addition, the effect of the slab width and casting speed on the bulging are discussed.

• 대한조선학회논문집
• /
• 제34권3호
• /
• pp.76-84
• /
• 1997

초기설계 단계에서는 선체구조 강도의 신속한 해석을 위해 보요소를 사용한 유한요소 해석이 일반적으로 사용된다. 선체구조를 보요소로 모델링할 때, 브라켓은 해석의 간편화를 위해 강체 요소로 표시된다. 강체 단부의 길이(=span point)는 세 가지 관점 - 굽힘, 전단, 축 변형 - 에 따라서 결정된다. 본 논문에서는, 새로운 2차원 보요소를 개발하였고, 2차원 해석으로 3차원 해석을 대신할 수 있는 방법을 제안하였다. '강체 단부 보요소' 라고 명명된 이 보요소는 한 요소 내에서 세 종류의 span point 효과를 모두 고려할 수 있는데, 이것은 보통의 보요소에서는 불가능한 것이다. 강체 단부 보요소를 사용한 Portal frame 해석결과는 membrane 해석결과와 잘 일치한다. 그리고, 영향계수를 사용한 2단계 해석을 포함하는 준 3차원 해석결과는 좋은 정확도를 보이고 있다. 강체 단부 보요소와 준 3차원 해석방법을 사용한 구조해석은 브라켓에 해당하는 요소가 필요치 않고, 3차원 해석을 단순화시킬 수 있었기 때문에 좋은 계산효율을 가진 것으로 판명되었다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.201-206
• /
• 2007

In this paper, we apply a three-dimensional rigid-plastic finite element method to simulate an unsteady-state roll forming process. A typical roll forming process is investigated from the standpoint of computer simulation and its realistic analysis model is proposed. The material is considered as bulk material and discretized into hexahedral finite elements. The presented approach is applied to simulating the roll forming process of straight stringer used for aircraft structure.

• 한국압력기기공학회 논문집
• /
• 제19권2호
• /
• pp.75-83
• /
• 2023

For three-dimensional finite element welding residual stress simulation, several methods are available. Two widely used methods are the moving heat source model using heat flux and the temperature boundary condition model using the temperature profile of the welded beads. However, each model has pros and cons in terms of calculation times and difficulties in determining welding parameters. In this paper, a new method using the moving temperature profile model is proposed to perform efficiently 3-D FE welding residual stress analysis for large structures. Comparison with existing experimental residual stress measurement data of two-pass welding pipe and SNL(Sandia National Laboratories) mock-up canister shows the accuracy and efficiency of the proposed method.

• 한국CDE학회논문집
• /
• 제1권1호
• /
• pp.65-75
• /
• 1996

This paper describes an automatic finite element(FE) mesh generation for three-dimensional structures consisting of free-form surfaces. This mesh generation process consists of three subprocesses: (a) definition of geometric model, i.e. analysis model, (b) generation of nodes, and (c) generation of elements. One of commercial solid modelers is employed for three-dimensional solid and shell structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Automatic generation of FE meshes for three-dimensional solid and shell structures holds great benefits for analyses. Practical performances of the present system are demonstrated through several mesh generations for three-dimensional complex geometry.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1999년도 춘계학술대회논문집
• /
• pp.261-264
• /
• 1999

An integrated finite element-based model is presented for the prediction of the three dimensional tran-sient thermo-mechanical behavior of the work roll in hot strip rolling. The model is comprised of basic finite element models which are incorporated into an iterative solution procedure to deal with the inter-dependence between the thermo-mechanical behavior of the strip and that of the work roll which arises from roll-strip contact as well as with the interdependence between the thermal and mechanical behav-ior Demonstrated is the capability of the model to reveal the detailed aspects of the thermo-mechanical behavior and to reflect the effect of various process parameters.

• 한국지능시스템학회논문지
• /
• 제19권2호
• /
• pp.230-235
• /
• 2009

본 논문은 3차원구조물의 유한요소해석을 위한 자동 유한요소 생성에 관한 것으로 퍼지이론과 버블요소 생성기법, 상용 솔리드모델러로 구성되어진다. 새로운 요소생성과정은 (a) 해석모델인 형상모델링 정의, (b) 버블생성, 그리고 (c) 요소생성으로 이루어진다. 형상모델링에는 상용 솔리드모델러를 이용하였으며 버블은 각 지점에서의 버블간격함수에 의해 생성되어진다. 버블간격 함수는 지식처리수법에 의해 조절되어 진다. 요소생성을 위해서는 기본적으로 데로우니방법을 도입하였다. 이러한 3차원 구조물에 대한 유한요소의 자동생성은 해석을 위해 큰 잇점이 있다. 실제적인 현 시스템의 효용성을 검증하기위해 3차원 형상에 대한 예를 제시하였다.