• Journal of the Korean Home Economics Association
• /
• v.40 no.8
• /
• pp.61-69
• /
• 2002

The research of the current situation of made-to-measure production by ready-made men's suit companies was done by interviewing and surveying the made-to-measure specialists. It was apparent that most frequently purchased items in Mass Customization were jackets of formal dress. The results of the research on the current situation of Mass Customization by ready-made clothes companies were as follows. The Mass Customization accounted for 3∼10%. The advantages of Mass Customization were more acceptable sizes, designs and details while the initial reasons for it were unusual physical figures and designs. The posture of a customer during measuring turned out to be critical enough to influence fitness after production. The companies in the research were found out to have materials for Mass Customization in storage and the sizes and other data of fixed circle of customers who would want Mass Customization saved in computer in most of the cases.

• Journal of the Korean Society for Precision Engineering
• /
• v.8 no.4
• /
• pp.107-117
• /
• 1991

The dynamic stability problem of nonconservative system is one of the important problems. In this study, flexible missile with mass variation is regarded as a free Timoshenko beam subjected to a controlled follower force. The stability was studied numerically through the finite element method. Through the study, the obtained results are as follows: [1] Without force direction control (1) In the case of no mass reduction, the existence of concentrated mass increases critical follower force. (2) Mass reduction rate of the beam slightly effects on the change of critical follower force. [2] With force direction control (1) Shear deformation parameter S contributes insignificantly to the force at instability when $S{\geq}10^4$. (2) With mass variation, increase of concentrated mass increases critical follower force at instbility. (3) The type of promary instability is determined by the sensor location.

• Tunnel and Underground Space
• /
• v.11 no.4
• /
• pp.311-318
• /
• 2001

RQD is used to evaluate the degree of fracture in the rock mass and is also used as input into rock mass classification scheme, such as RMR and Q-system. However there are some drawbacks of the RQD caused by anisotropy and calculation length. Thus it is important to understand the variation of RQD in 3-D space in order to evaluate the properties of rock mass. The main purpose of this study is to reveal the distribution of RQD in the equal-angle stereo net, to investigate the effects of scanline length and joint frequency and to inquire the effect on the selection of rock mass strength parameters in the numerical analysis. Analysis has been extended to field joint survey data using same method. The results can be applied to contribute for more accurate interpretation of the results of engineering geological survey for better design and construction work.

• Nuclear Engineering and Technology
• /
• v.38 no.3
• /
• pp.251-258
• /
• 2006

This study presents an idea of using analogy concept to the heat transfer studies regarding the HTGR development. Theoretical backgrounds regarding the idea were reviewed. In order to investigate the predictability of a mass transfer system for heat transfer system phenomenology, an electroplating system coupled with a limiting current technique was adopted. Test facilities for laminar forced convection and natural convections under laminar and turbulent conditions were constructed, for which heat transfer correlations are known. The test results showed a close agreement between mass transfer and heat transfer systems, which is an encouraging indication of the validity of the analogy theory and the experimental methodology adopted. This paper shows the potential of the experimental method that validates the little-understood heat transfer phenomena, even in complex geometries such as HTGR.

• Journal of KSNVE
• /
• v.10 no.4
• /
• pp.575-583
• /
• 2000

In this paper, we design a vibration control system that includes a 3-D.O.F. mass-spring-damper structure for the analytical model of a building that is excited at the base of this structure by an external dynamic force, and one Active Mass Damper(AMD) on the top of this structure to generate control forces fro attenuation of the structural response. Two robust controllers based on $\mu$-synthesis and H$\infty$ optimal control are designed for the structural system to show that the performance of a control system can be degraded by some parameter uncertainties such as mass, stiffness coefficients, and/or damping coefficients. The performance of the two controllers are compared in terms of nominal performance, robust stability and robust performance by simulations.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.76-86
• /
• 1998

The Two-Mass Spring(TMS or Two-Inertia Resonance) system is one of the simplest models which generate a torsional vibration. In this system, it is required to design a controller achieving the control performance while suppressing the torsional vibration. In this paper, we compared and considered with the state feedback effects for the TMS system. By connecting each controller design to the state feedback control, we could predict each controller performances and decide weighting functions and parameters of LQ and $H_\infty$ controller.

• Journal of Energy Engineering
• /
• v.24 no.3
• /
• pp.135-141
• /
• 2015

The core melts stratifies into lower mixture layer and upper metal layer by density in a severe accident condition. The decay heat generated from the mixture layer threatens the integrity of the reactor vessel. This study simulated the natural convection heat transfer of the mixture layer with volumetric heat source using the mass transfer system. $H_2SO_4-CuSO_4$ electroplating system was used as the mass transfer system. With the modified Rayleigh number of $3{\times}10^{14}$, the Nusselt number showed minimum at the bottom and increased along curvature to the top of the experimental apparatus.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.752-755
• /
• 2003

Injection molding is the one of the most important processes for mass production of plastic parts. Usually Injection molds for mass production are constituted to multi-cavity runner system to manufacture the more parts at a time. To uniformly fill to each cavity, multi-cavity molds are designed to geometrically balanced runner system. However. in practice this is not the case. The previous studies by Beaumount at.[2] reported that filling imbalance occurred by thermal unbalance on the mold and viscosity variation of resins and so on. In this study, we conducted experiments in order to know the causes or filling imbalance for 3 plate type mold with 8 cavities. We presented a new so called 4BF mold(4plate Type Balanced Filling Mold) to improve filling balance. We conducted a experimental injection molding to verify a efficiency of the 4BF mold. In the results of the experiment, We could confirmed the possibility of the 4BF mold.

• Tunnel and Underground Space
• /
• v.16 no.3 s.62
• /
• pp.203-208
• /
• 2006

This report is to introduce an article to compare 3 kinds of methods as RMR, Q-system and RMi published in Tunnel and Tunnelling Technology 2003. As rock mass classification is applied to estimate the amount of the support as an empirical design method, an attempt has been made to evaluate the parameters for classifications and their variations by Professor Nilsen and his team in Norway. Representability and reproducibility in measuring the field parameters are discussed and sensitivity of rating values in the three methods is also analyzed in this research. Although some parameters have high variation in rating among the 5 observers, the rock mass class has been found to be quite similar.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2000.11a
• /
• pp.571-574
• /
• 2000

오늘날 단백질 정보 분석은 HGP(Human Genome Project)이후 Post-genome 시대를 맞이하면서 매우 중요한 분야로 인식되고 있다. 이 단백질 정보를 이용하는 응용은 Discovery of Protein Structure/Function Relationships, Evolutionary Relationships, 3D Modeling 등 많은 분야에서 활용되어진다. 여러 가지 분야들 중에서 특히 단백질 구조 분석을 위한 많은 다양한 소프트웨어들이 출현되고 있다. 하지만 복잡하게 얽혀 있는 단백질들을 검증하기 위해서 Mass Spectrometry에서 발생되는 Peptide Masses의 정보들을 이용할 수 있다. 이에 본 논문에서는 Mass Spectrometry에서 생성된 Peptide Mass Map을 이용하여 기존의 단백질 Database에 있는 단백질들과 비교하는 자동화 단백질 검증 시스템 설계 및 구현에 관한 연구내용을 담고 있다. 이 시스템은 3-계층 중심으로 개발이 이루어지며 이 기종 시스템과의 원활한 통신 다중 계층의 환경에 있는 각 객체들간에 통신을 위해서 RMI 기반의 미들 웨어를 활용하기로 한다.