• Structural Engineering and Mechanics
• /
• 제55권1호
• /
• pp.29-46
• /
• 2015

A three-dimensional (3-D) method of analysis is presented for determining the natural frequencies of a truncated shallow and deep conical shell with linearly varying thickness along the meridional direction free at its top edge and clamped at its bottom edge. Unlike conventional shell theories, which are mathematically two-dimensional (2-D), the present method is based upon the 3-D dynamic equations of elasticity. Displacement components $u_r$, $u_{\theta}$, and $u_z$ in the radial, circumferential, and axial directions, respectively, are taken to be periodic in ${\theta}$ and in time, and algebraic polynomials in the r and z directions. Strain and kinetic energies of the truncated conical shell with variable thickness are formulated, and the Ritz method is used to solve the eigenvalue problem, thus yielding upper bound values of the frequencies by minimizing the frequencies. As the degree of the polynomials is increased, frequencies converge to the exact values. Convergence to four-digit exactitude is demonstrated. The frequencies from the present 3-D method are compared with those from other 3-D finite element method and 2-D shell theories.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.3-7
• /
• 2009

In this study, two and three dimensional low Reynolds number flows are compared. For the two dimensional flow, an airfoil was considered and for the three dimensional low wing and full-body aircraft were considered. Because a flight condition of the aircraft is in a low Reynolds number flow, itl requires reflecting flow transition. In the two dimensional analysis, transition is predicted using en method. In the three dimensional flow, the effect of transition is included using k-w SST turbulence models.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1609-1614
• /
• 2003

In this study, a practical holographic interferometric tomography system, which is instantaneous and non-contact for measuring three dimensional flow field, was developed. The system consists of holographic recording/reconstruction system, fringe analysis code and computational tomography code and it is developed with Gill environment for general users. The developed system was applied to three-dimensional natural convection from a discrete flush-mounted circular heat source on the bottom of a cubic enclosure. The heat source was located at the off-center of the bottom plate so that three-dimensional temperature field can be achieved. A set of multi-directional holographic interferograms was recorded by employing a double-reference beam, double-exposure holographic technique. Optical pathlength data were extracted from the recorded interferometric data and finally three dimensional temperature field inside the cube was reconstructed.

• 한국전자파학회지:전자파기술
• /
• 제5권3호
• /
• pp.14-21
• /
• 1994

본 논문에서는 임의의 형태와 매질성분을 갖는 3차원 물체의 RCS(Radar Cross Section)를 구하기 위한 수 치켜 방법을 제시한다 RSC는 3차원 경계요소볍(3-DBEM)을 사용하여 다충산란체에 관한 표면적분방정식을 해석함으로서 구한다. 본 논문에서는 3차원적 경계요소법의 타당성과 유용성을 보이기 위하여 산란체의 형태를 비스듬한 입사전계로 부터 다충 정6변체 및 직6면체를 선택하였으며, 손실을 갖는 유전체 및 자성체의 경우에도충분히 적용될수 있도록 고찰하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 A
• /
• pp.220-222
• /
• 1999

This paper presents a numerical analysis of the eddy current testing with cracked pipe using finite element method (FEM). ${\vec{A}},\;{\phi}-{\vec{A}}$ method is adopted for the formulation of 3-dimensional(3-D) FEM with the brick element. The cracks investigated here are the inner and outer surface of axial symmetry, 90 degree circular one. The algorithm of 3-D numerical analysis is employed for the axisymmetric pipe with the cracks. In order to verify the validity of 3-D numerical analysis, the results are compared with those of 2-D analysis with the same type of the model. The differential impedance is obtained by using energy method and its locus are various 8-shaped curves for each cracks. The ICCG method is used for the calculation of a matrix.

• 복식
• /
• 제58권6호
• /
• pp.35-41
• /
• 2008

The purposes of this study lied in the analysis and classification of neck-base circumference shapes of the women in their twenties, by the application of three-dimensional automatic measurement data of human body, and thereby in the understanding of neck-base circumference shapes by the classified type. The findings are as follows: 1. The comparison of three-dimensional human body measurement items relating to the neck-base circumference part of the women in their twenties indicated that the largest individual difference was found in cervicale-center-anterior neck radius than in other items. 2. The factor analysis, which was conducted to extract the factors constituting the neck-base circumference, showed the shape of cervicale(factor 1), the shape of section neck(factor 2), the thickness of neck(factor 3), the shape of anterior neck(factor 4), and the shape of side neck(factor 5). 3. The classification of the neck-base circumference shapes resulted in three types. Type 1 was the shape of a reverse triangle hanging forward, Type 2 was that of a circle, and Type 3 was that of an oval open to the sides.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3039-3044
• /
• 2007

A few fluid structure interaction analyses have been developed for turbomachinery blades in comparison with aircraft wings. Also, the existing aeroelastic analyses for turbomachinery blades have been mostly limited to cases with a steady freestream. In reality, however, the inflowing freestream is often pulsating. Therefore, this paper presents stability and forced response analyses of an isolated three-dimensional blade under pulsating freestream conditions. A new three-dimensional unsteady vortex lattice model under a pulsating freestream has been developed in discrete time domain to examine unsteady aerodynamic forces acting on a vibrating blade. The blade's structural behaviors have been analyzed by using a three-dimensional plate model. In the aeroelastic analysis, the flutter onset of a blade under pulsating freestream is predicted by the Floquet analysis. The new time domain method can predict aeroelastic stability as well as time history.

• 한국광학회지
• /
• 제12권1호
• /
• pp.17-24
• /
• 2001

엄밀한 결합파 해석(rigorous coupled-wave analysis)을 이용하여 2차원 및 3차원의 주기적인 구조 제작을 위한 2차원 이진위상 회절격자를 설계 및 분석하였다. 이 회절격자는 근접장 홀로그래피를 위한 위상 마스크로서 수직 입사하는 빛에 대하여 여거 개의 회절파들을 발생하고 이들은 공간상에 주기적인 간섭무늬를 형성한다. 입사파의 편광상태, 파장, 표면 양각형태, 요철 깊이와 duty cycle을 바꿈으로써 회절된 빛들을 조절할 수 있는데 2차원 구조의 경우 0차 회절효율이 최소가 되고 1차회절효율이 최대가 될 때 최적의 결과를 보인다. 한편 0차 회절효율이 상당한 크기를 가지거나 심지어 다른 차수의 회절효율보다 높을 때 마이크로 미터 이하의 미세구조를 갖는 tetragonal-body-centered 구조와 hexagonal 구조의 포토닉 결정을 제작 할 수 있는 다양한 형태의 3차원 공간 간섭무늬가 형성된다.

• 터널과지하공간
• /
• 제16권3호
• /
• pp.218-231
• /
• 2006

이방성/비균질 암반은 터널 굴착에 의해 매우 다양한 변형거동을 나타내며, 이는 암반 내 존재하는 단층 및 절리 그리고 파쇄대 등과 같은 지질학적 요소들의 공간적인 특성에 의해 크게 좌우된다. 본 논문에서는 파쇄대가 존재할 경우 2차원 수치해석을 통해 여러 가지 영향인자들에 대한 매개변수 분석을 수행하였다. 그 결과 파쇄대 폭 및 위치 그리고 지보 등에 따라 터널 변위는 분석 위치마다 매우 상이하게 나타났다. 그러나 불연속면 및 파쇄대는 3차원적 기하구조를 나타내므로 3차원 지반 구조적 특성을 고려할 수 있는 3차원 해석이 필수적이라고 판단된다. 또한 기술적으로 안전하고 경제적인 터널 건설을 위하여 불확실한 지반조건 및 환경여건에 매우 유연하게 대처할 수 있는 설계/시공 기술이 필요하다고 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제51권1호
• /
• pp.1-13
• /
• 2023

Sengon (Falcataria moluccana Miq.) tree offers a wood of low quality and durability owing to its low density and thin cell walls. This study aimed to improve the properties of sengon wood by making the wood magnetic, producing new functions, and characterizing magnetic sengon wood. Each wood sample was treated using one of the following impregnation solutions: Untreated, 7.5% nano magnetite-furfuryl alcohol (Fe₃O₄-FA), 10% nano Fe₃O₄-FA, and 12.5% nano Fe₃O₄-FA. The impregnation process began with vacuum treatment at 0.5 bar for 2 h, followed by applying a pressure of 1 bar for 2 h. The samples were then tested for dimensional stability and density and characterized using scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDX), Fourier transform infrared spectrometry (FTIR), X-ray diffraction (XRD) analysis, and vibrating sample magnetometry (VSM) analysis. The results showed that the Fe₃O₄-FA impregnation treatment considerable affected the dimensional stability, measured in terms of weight percent gain, anti-swelling efficiency, water uptake, and bulking effect, as well as the density of sengon wood. Changes in wood morphology were detected by the presence of Fe deposits in the cell walls and cell cavities of the wood using SEM-EDX analysis. XRD and FTIR analyses showed the appearance of magnetite peaks in the diffractogram and Fe-O functional groups. Based on the VSM analysis, treated sengon wood is classified as a superparamagnetic material with soft magnetic properties. Overall, 10% Fe₃O₄-FA treatment led to the highest increase in dimensional stability and density of sengon wood.