• Journal of Magnetics
• /
• v.17 no.2
• /
• pp.138-144
• /
• 2012

3-dimensional magnetic resonance cholangiopancreatography (MRCP) images reconstructed using the maximum intensity projection technique were analyzed qualitatively in patients diagnosed with pancreatobiliary diseases to determine their diagnostic utility. Single shot fast spin echo (SSFSE), fast spin echo (FSE) and 3-dimensional reconstructive images were acquired from 20 patients diagnosed histologically with pancreatobiliary diseases using a 3.0T MR scanner. According to qualitative analysis, the fast spin echo images and 3-dimensional reconstructed images of the hepatic duct, gall bladder and common bile duct had a higher signal to noise ratio (SNR) than the single shot fast spin echo images. Fast spin echo images and 3-dimensional reconstructed images did not show any differences. The contrast to noise ratio of the hepatic duct, gallbladder and common bile duct on the fast spin echo images and 3-dimensional reconstructed images was higher than that of the single shot fast spin echo images. The fast spin echo images and 3-dimensional reconstructed images showed similar quality.

• Computational Structural Engineering
• /
• v.6 no.4
• /
• pp.107-118
• /
• 1993

New methods of visualizing the data from finite element analyses of 3-dimensional solids were developed in this study. Their efficiency and practicality were examined through their application and implementation into a finite element analysis software. The major effort of the study was to provide a way of representing data inside of volume, which is the most difficult problem in the postprocessing of 3-dimensional solids. Section representation, volume slice and separation, and isosurface representation were proposed for this purpose.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.10
• /
• pp.3272-3281
• /
• 1996

The flow analysis method which had been developed for the numerical calculation of 3-dimensional, incompressible and turbulent flow within an axial compressor was extended to the flow field within centrifugal impeller. In this method based on the SIMPLE(Semi Implicit Method Pressure Linked Equations) algorithm, the coordinate transformation was adopted and the standard k-.epsilon. model using wall function was used for turbulent flow analysis. The calculated flow fields have agreed very well with measurement results. Especially, 3-dimensional and viscous flow characteristics including secondary flows, jet-wake flow and decreased pressure rise along impeller passage, which can't be predicted by inviscid Q3D calculation were predicted very reasonably.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.77-80
• /
• 2002

The recent 3D visualization such as volume rendering, iso-surface rendering or stream line visualization gives more understanding about structures or distribution of data in a space and, moreover, the real-time rendering of a scene enables the animation of time-series data. Because the meteorological data is frequently formed as multi-variables, 3-dimensional and time-series data, the spatial analysis, time-series analysis, vector display, and animation techniques can do important roles to get more understanding about data. In this research, our aim is to develop the 3-dimensional visualization techniques for meteorological data in the PC environment by using IDL. The visualization technology from :his research will be used as basic technology not only for the deeper understanding and the more exact prediction about meteorological environments but also for the scientific and spatial data visualization research in any field from which three-dimensional data comes out such as oceanography, earth science, or aeronautical engineering.

• Proceedings of the KSME Conference
• /
• 2001.06d
• /
• pp.497-502
• /
• 2001

Three-dimensional natural convection from a discrete flush-mounted circular heat source on the bottom of a cubic enclosure was studied by using a holographic interferometric tomography. The heat source was located at the off-center of the bottom plate so that three-dimensional temperature field can be achieved. A set of multidirectional holographic interferogram was recorded by employing a double-reference beam, double-exposure holographic technique in order to eventually reconstruct the temperature fields. The recorded interferometric data appear good enough to be further processed to extract optical pathlength data from them and finally reconstruct the temperature fields. A complete analysis of the temperature fields including the field reconstructions and comparison with thermocouple measurements is underway and will be reported shortly.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.47 no.3
• /
• pp.222-233
• /
• 2011

This study is for the multi-dimensional analysis of diverse data sets for artificial reefs off the coast of Shimonoseki, Yamaguchi prefecture, Japan. Various data sets recorded in artificial reefs ground were integrated in new GIS software: to reveal the relationships between water temperature and fish schools; to visualize the quantitative connection between the reefs and the fish schools; and to compare the seabed types derived from two different data sources. The results obtained suggest that the application of GIS in analyzing multi-dimensional data is a better way to understand the characteristics of fish schools and environmental information around artificial reefs and particularly in the evaluation of the effectiveness of artificial reefs.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.11 no.1
• /
• pp.73-80
• /
• 1999

This paper describes a numerical study of three-dimensional buoyant turbulent flow in a stairwell model with three convective differencing schemes, which include the upwind differencing scheme, the hybrid scheme and QUICK scheme. The Reynolds-averaged Navier-Stokes and energy equations are solved with a two-equation turbulence model. The Boussinesq approximation is used to model buoyancy terms in the governing equations. Three-dimensional predictions of the velocity and temperature fields are presented and are compared with experimental data. Three-dimensional simulations with each scheme have predicted the overall features of the flow fairly satisfactorily. A better agreement with experimental is achieved with QUICK scheme.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.15 no.3
• /
• pp.343-348
• /
• 2005

This paper describes an automatic finite element (FE) mesh generation for three-dimensional structures consisting of free-form surfaces. This mesh generation process consists of three subprocesses: (a) definition of geometric model, i.e. analysis model, (b) generation of nodes, and (c) generation of elements. One of commercial solid modelers is employed for three-dimensional solid structures. Node is generated if its distance from existing node points is similar to the node spacing function at the point. The node spacing function is well controlled by the fuzzy knowledge processing. The Delaunay method is introduced as a basic tool for element generation. Automatic generation of FE meshes for three-dimensional solid structures holds great benefits for analyses. Practical performances of the present system are demonstrated through several mesh generations for three-dimensional complex geometry.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10b
• /
• pp.928-933
• /
• 1998

The temperature and stress behaviour of mass concrete pier at early ages was analysed based on the finite element method. The pier investigated is a three-dimensional structure of which the cross-sectional shape varies from a circle to an ellipsoid along the longitudinal axis. In order to obtain the transient temperature and stress distributions in the structure, a three dimensional method was adopted, because the structure of this type cannot be modeled accurately by a two-dimensional method. Temperature analysis was performed by taking into consideration of the cement type and content, boundary and environment conditions including the variations of atmospheric temperature and wind velocity. The results of this study may be useful for the temperature control to restrain thermal cracking and the construction management to design the resonable curing method of mass concrete structure.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.2401-2405
• /
• 2008

In the present study, a three-dimensional least square/level set based two-phase flow code was developed for the simulation of three-dimensional sloshing problems using finite element discretization. The present method can be utilized for the analysis of a free surface flow problem in a complex geometry due to the feature of FEM. Since the finite element method is employed for the spatial discretization of governing equations, an unstructured mesh can be naturally adopted for the level set simulation of a free surface flow without an additional load for the code development except that solution methods of the hyperbolic type redistancing and advection equations of the level set function should be devised in order to give a bounded solution on the unstructured mesh. From the numerical experiments of the present study, it is shown that the proposed method is both robust and accurate for the simulation of three-dimensional sloshing problems.