• 한국가시화정보학회:학술대회논문집
• /
• 2006.12a
• /
• pp.96-101
• /
• 2006

3-D visualization using confocal laser scanning microscopy (CLSM) in a chaotic micromixer was performed as a reproduction experiment and the feasibility of 3-0 imaging technique in the microscale was confirmed. For diagonal micromixer (DM) and two types of staggered herringbone micromixers (SHM) designed by Whitesides et al., to verify the evolution of mixing, cross sectional images are reconstructed at the end of every cycle. In a DM, clockwise rotational flow motion generated by diagonal ridges placed on the floor of micromixer is observed and this motion makes the fluid commingle. On the contrary, there are two rotational flow structures in the SHM and the centers of rotation exchange their position each other every half cycle because of the V shape of ridges varying their orientation every half cycle. Local rotational flow and local extensional flow generated by the complicate ridge pattern make the flow be chaotic and accelerate the mixing of fluid. The dominant parameter that influences on the mixing characteristic of SHM is not the length of micromixer but the number of ridges under the same flow configurations.

• Journal of Korea Multimedia Society
• /
• v.11 no.2
• /
• pp.228-236
• /
• 2008

Recently augmented reality technology has been researched to view the virtual shape of buildings before construction or cultural heritages under recovery. Those researches used special devices or markers that are not applicable in long distanced outdoor environment. Also the server had to compute a lot of transformations for the location changes of virtual objects. This paper proposed a mobile augmented reality system that uses GPS and accelerometer sensors in order to compute the virtual object's locations without using markers. The server determines the position and orientation by comparing the GPS data obtained from the client with the predefined 3D object informations in the server. If the server sends the virtual object informations such as the position, orientation and matching information, then the client matches the virtual object on the screen of mobile camera phone. In addition, the client computes the transformations of location change detected by the accelerometer derived from the user's movement without additional connection to the server.

• Journal of Broadcast Engineering
• /
• v.22 no.4
• /
• pp.473-483
• /
• 2017

Since the advent of 3D and UHD contents, demand for high-quality panoramic images has been increasing. The UWV(Ultra-Wide Viewing) service uses a wider viewing angle than conventional panoramas to provide a lively experience for users and enhance their understanding of the event. In this paper, we propose a spatial adjacency map generation method and an UWV file storage format technology to provide UWV service. The spatial adjacency map measures the similarity between images and generate the position information of the images based on similarity. And the stitching time of the image can be shortened through the generated position information. Through the spatial adjacency map, we generate the large screen content quickly. The UWV file format which is based on ISOBMFF process spatial adjacency map and videos and support random access. In this paper, we design the UWV player to verify the spatial adjacency map and UWV file format and show the result of experiments.

• Smart Structures and Systems
• /
• v.19 no.2
• /
• pp.115-126
• /
• 2017

In this paper, size dependent bending and free flexural vibration behaviors of functionally graded (FG) nanobeams are investigated using a nonlocal quasi-3D theory in which both shear deformation and thickness stretching effects are introduced. The nonlocal elastic behavior is described by the differential constitutive model of Eringen, which enables the present model to become effective in the analysis and design of nanostructures. The present theory incorporates the length scale parameter (nonlocal parameter) which can capture the small scale effect, and furthermore accounts for both shear deformation and thickness stretching effects by virtue of a hyperbolic variation of all displacements through the thickness without using shear correction factor. The material properties of FG nanobeams are assumed to vary through the thickness according to a power law. The neutral surface position for such FG nanobeams is determined and the present theory based on exact neutral surface position is employed here. The governing equations are derived using the principal of minimum total potential energy. The effects of nonlocal parameter, aspect ratio and various material compositions on the static and dynamic responses of the FG nanobeam are discussed in detail. A detailed numerical study is carried out to examine the effect of material gradient index, the nonlocal parameter, the beam aspect ratio on the global response of the FG nanobeam. These findings are important in mechanical design considerations of devices that use carbon nanotubes.

• Economic and Environmental Geology
• /
• v.27 no.3
• /
• pp.263-279
• /
• 1994

Paleomagnetic and rock-magnetic data of Cretaceous sedimentary and volcanic rocks from the Euiseong area indicate that the stable components of remanence are carried by single and pseudo-single domain magnetite, with the exception of the Shinyangdong Formation which has been remagnetized. The Hayang Group, except for the remagnetized Shinyangdong Formation, yields the mean characteristic direction of $D/I=22.5^{\circ}/57.2^{\circ}$ (${\alpha}_{95}=4.6^{\circ}$, N=14 sites) and the pole position is $72.0^{\circ}N$, $206.4^{\circ}E$ ($dp/dm=4.9^{\circ}/6.7^{\circ}$). The Yucheon Group shows two polarities and the mean characteristic direction of $D/I=351.2^{\circ}/60.5^{\circ}$ (${\alpha}_{95}=11.2^{\circ}$, N= 19 sites) and the pole position is $81.3^{\circ}N$, $79.0^{\circ}E$ ($dp/dm=13.0^{\circ}/17.0^{\circ}$). The mean directions of both the Hayang and the Yucheon Groups are supported by the McElhinny's fold test at the 99% confidence level and that of the Yucheon Group by a reversal test at the 95% confidence level. A magnetostratigraphic correlation between polarities of the study formations and the Geomagnetic Time Scale indicates that the Hayang Group can be correlated to the Cretaceous Long Normal Superchron (CLNS), and the Yucheon Group to the boundary between the CLNS and the Polarity Chron 33R or later boundaries between normal and reverse polarities. Comparison of the paleopoles from this study with those from the surrounding areas both within the Gyeongsang basin and in the northeastern Asia indicates that the study area was not undergone significant tectonic rotations with respect to the other parts of the Gyeongsang basin and that the Korean Peninsula was the part of the single terrane of the northeastern Asia at least since the CLNS. The Yucheon Group can be divided into four sub-groups based on the paleomagnetic data, suggesting that there were at least four times of volcanic activities in the study area.

• Journal of Advanced Navigation Technology
• /
• v.24 no.5
• /
• pp.343-347
• /
• 2020

This paper presents the development of a software for tracking the location of objects in the water and for creating a three-dimensional hull map. The objective of this software, as a software for underwater hull cleaning robot, is to map the location of underwater hull cleaning robot and to locate the position of sensor by identifying the shaded area of acoustic communication. For the software designed for mapping the location of cleaning robot in the water, the height and intensity were applied as variables for underwater ultrasonic communication. The software for creating a three-dimensional hull was developed by OpenGL using scanned lines from a blueprint of a ship. This software can help identifying the location of underwater hull cleaning robot without actual visibility and can be used to maintain a stable communication status by locating the position of sensor by easily spotting the shaded area of acoustic communication caused by the curved area of the bottom of the ship.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.4
• /
• pp.747-752
• /
• 2009

In this paper, the MIMO(Multi-Input Multi-Output) channel characteristics for Rx antenna spacing are described in the real environment, which has LOS(Ling of Sight) and NLOS (Won-Line of Sight). We developed $2\times2$ MIMO channel measurement system at 2.3GHz Wibro Band. MIMO antenna evaluation parameters such as received power, channel capacity and spatial correlation are evaluated for standard dipole antenna with 0.25, 0.5, 0.75 and 1.0 wavelength spacing at 2-position for LOS and 4-position for NLOS. The spatial correlation is distributed more than 0.9 in most LOS case which might be intricate to operate MIMO communication. MIMO antenna design need to be focused on getting spatial diversity and reducing spatial correlation in LOS case.

• International Journal of Aeronautical and Space Sciences
• /
• v.10 no.2
• /
• pp.86-94
• /
• 2009

This paper deals with the creation of a new, low-cost point/position tracking system that can measure deformations in engineering structures with simple commercially widespread cameras. Though point tracking systems do exist today, such as Stereo Pattern Recognition (SPR) and Projection Moir$\acute{e}$ Interferometry (PMI) systems, they are far too costly to use to analyze small, simple structures because complex optical components such as large flashes, high-resolution cameras and data acquisition systems with several computers are required. We developed a point tracking system using commercial cameras. This system used IR LEDs and commercial IR CCD cameras to minimize the interference posed by other extraneous light sources. The main algorithm used for this system is an optical point tracking algorithm, which is composed of the point extraction algorithm and the point matching algorithm for 3-D motion estimation. a series of verification tests were performed. Then, the developed point tracking system was applied to measure deformations of an acrylic plate under a mechanical load. The measured deformations of the acrylic plate matched well with the numerical analysis results. The results indicate that the developed point tracking system is reliable enough to measure continuous deformed shapes of various engineering structures.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.37
• /
• pp.9.1-9.7
• /
• 2015

Background: This study are to identify the symptomatic changes and condylar stability after 2 jaw surgery without preceding treatments for Temporomandibular joints(TMJ) in class III patients with the TMJ symptoms; and to assess therapeutic effect of 2 jaw surgery and the necessity of preceding treatment for alleviation of TMJ symptoms. Methods: 30 prognathic patients with preexisting TMJ symptoms were divided into 2 groups according to presence or absence of preceding treatments before the surgery. We evaluated symptomatic changes on both TMJ by questionnaires and clinical examinations. And we reconstructed 3D cone beam computed tomography images before 2 jaw surgery, immediately after the surgery, and 6 months or more after the surgery with SimPlant software, and analyzed the stability of condylar position on 3D reconstruction model. Significances were assessed by the Wilcoxon signed rank test on SPSS ver. 20.0. Results: Both groups had favorable changes of TMJ symptoms after orthognathic surgery. And postoperative position of condyle had good stability during follow-up period. Conclusion: 2 jaw surgery without preceding treatments for TMD can have therapeutic effect for TMD patients with class III malocclusion.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.238-242
• /
• 2007

Today's commercial high resolution satellite imagery such as that provided by IKONOS and QuickBird, offers the potential to extract useful spatial information for geographical database construction and GIS applications. Digital maps supply the most generally used GIS data probiding topography, road, and building information. Currently, the building information provided by digital maps is incompletely constructed for GIS applications due to planar position error and warped shape. We focus on extracting of the accurate building information including position, shape, and height to update the building information of the digital maps and GIS database. In this paper, we propose a new method of 3D building information extraction with a single high resolution satellite image and digital map. Co-registration between the QuickBird image and the 1:1,000 digital maps was carried out automatically using the RPC adjustment model and the building layer of the digital map was projected onto the image. The building roof boundaries were detected using the building layer from the digital map based on the satellite azimuth. The building shape could be modified using a snake algorithm. Then we measured the building height and traced the building bottom automatically using triangular vector structure (TVS) hypothesis. In order to evaluate the proposed method, we estimated accuracy of the extracted building information using LiDAR DSM.