• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.31-36
• /
• 2010

SAI(Secondary Air Injection) system has been studied widely as one of the promising countermeasure for reducing HC emission at cold start. In this paper, in order to find out the optimal position of SAI, computational thermal fluid analysis on exhaust system adapted SAI system is performed using commercial 3-D CFD code, CFX. The present results showed that SAI position strongly affected the uniformity of air distribution in front of catalyst. And also through the decision process of optimal position of SAI, new index, uniformity of air distribution($U_{\phi}$) is proposed to define it quantitively. Because $U_{\phi}$ is very simple equation and similar with flow uniformity, it is very easy to figure out the physical meaning and to apply it to practices. Finally, we applied the index $U_{\phi}$ to the decision process of the optimal position of SAI, so that we could get the clear comparison results.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1781-1786
• /
• 2005

In sensor network systems, all the nodes are interconnected and the positional information of each sensor is essential. To measure the temperature, position detection and communication functions are required. Many sensor nodes are distributed to a measurement field, and these sensors have three main functions: they measure the distance to the other nodes, the data of which are used to determine the position of each node; they communicate with other nodes; and they measure the temperature of each node. A novel range measurement method using the difference between light and sound propagation speed is proposed. The experimental results show the temperature distribution as measured with the aid of the determined positions. The positions of every node were calculated with a PC program. Eight nodes were manufactured and their fundamental functions were tested. The results of the range measurement method, which takes relatively accurate measurements, contribute significantly to the accuracy of the position determination. Future studies will focus on 3-D position determination and on the architecture of appropriate sensors and actuators.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1046-1058
• /
• 1996

In this paper, we describe an abvanced medical diagnostic system using multimedia technologies in netwok environments. In the system, docotors in remote sites perorm medicl diagnosis by exchanging information about patients and 3-D medicl images of malfunctioning body parts, which are reconstructed from 2-D images such as MRI, CT, CR, Angio. The diagnosic conferencing system controls the conferencing process by exchanging audio, information about patients, 3-D medical images and control data. 3-D medicl images are reconstructed by a ray casting method that uses an nalytical integration. Medical databae conists of absic information about patients, Information about medicl images, users, results of dianosis.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.163-166
• /
• 2003

Laser-Induced Thermal Imaging (LITI) is a laser addressed patterning process and has unique advantages, such as high-resolution patterning with over-all position accuracy of the imaged stripes within 2.5 micrometer and scalability to large-size mother glass. This accuracy is accomplished using real-time error correction and a high -resolution stage control system that includes laser interferometers. Here the new concept of mixed hybrid system which complement the advantages of small molecular and polymeric materials for use as an OLED; our system can realize the easy processing of polymers and high luminance efficiency of recently developed small molecules. LITI process enables to pattern the stripes with excellent thickness uniformity and multi-stacking of various functional layers without using any type of fine metal shadow mask. In this study, we report a full-color hybrid OLED using the multi-layered structure of small molecular/polymeric species.

• Journal of Ocean Engineering and Technology
• /
• v.36 no.3
• /
• pp.161-167
• /
• 2022

Three-dimensional finite element analysis (3D-FEA) models have been used to evaluate the shock-resistance responses of various equipments, including armaments mounted on a warship caused by underwater explosion (UNDEX). This paper aims to check the possibility of using one-dimensional (1D) FEA models for the shock-resistance responses. A frigate was chosen for the evaluation of the shock-resistance responses by the UNDEX. The frigate was divided into the thirteen discrete segments along the length of the ship. The 1D Timoshenko beam elements were used to model the frigate. The explosive charge mass and the stand-off distance were determined based on the ship length and the keel shock factor (KSF), respectively. The UNDEX pressure fields were generated using the Geers-Hunter doubly asymptotic model. The pseudo-velocity shock response spectrum (PVSS) for the 1D-FEA model (1D-PVSS) was calculated using the acceleration history at a concerned equipment position where the digital recursive filtering algorithm was used. The 1D-PVSS was compared with the 3D-PVSS that was taken from a reference, and a relatively good agreement was found. In addition, the 1D-PVSS was compared with the design criteria specified by the German Federal Armed forces, which is called the BV043. The 1D-PVSS was proven to be relatively reasonable, reducing the computing cost dramatically.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1938-1939
• /
• 2011

본 논문에서는 랜드마크의 시선각 측정값을 이용하여 3D 비전항법해를 계산하기 위한 항법방정식을 유도하고 항법해 결정 방법을 보여준다. 먼저, 카메라좌표계에서 측정한 시선각과 항법좌표계의 관계를 이용하여 3차원 항법방정식을 유도하였으며 항법해를 계산하기 위해서는 최소한 3개 이상의 랜드마크를 관측해야함을 보였다. 또한 논문에서는 항법방정식과 기하학을 이용하여 항체의 위치 및 자세를 계산하는 과정을 상세하게 기술한다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.1032-1035
• /
• 2000

Increasing demands on precision machining with computerized numerical control (CNC) machines have necessitated that the tool to move not only position error as small as possible, but also with smoothly varying feedrates in space. This paper presents a new high precision interpolation algorithm for 3-dimensional (3D) Non-Uniform Rational B-Spline (NURBS) curve in the reference-pulse CNC technique. Based on the minimum path error strategy, real-time NURBS interpolator was developed in software and this was implemented with a PC-NC milling machine. The several experimental results have shown that the proposed NURBS interpolator is useful for the high precision machining of complex shapes. It is expected that this algorithm can be applied to the CNC machines for the machining of 3D free-form surfaces.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2009.04a
• /
• pp.91-94
• /
• 2009

The Aerial photographic mission is working of taking picture at appropriate point at operating aircraft. Specially, because multi-looking camera system for 3D spatial data construction don't use large size CCD camera, do use middle size or small size CCD camera, Exterior parameter can't be calculated because of not enough overlap, if taking picture at inappropriate position. Therefore, we can construct 3D spatial modeling data by taking picture at planned points using GPS Positioning information

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• v.7 no.3
• /
• pp.216-220
• /
• 2007

Camera calibration in machine vision is the process of determining the intrinsic camera parameters and the three-dimensional (3D) position and orientation of the camera frame relative to a certain world coordinate system. On the other hand, Takagi-Sugeno-Kang (TSK) fuzzy system is a very popular fuzzy system and approximates any nonlinear function to arbitrary accuracy with only a small number of fuzzy rules. It demonstrates not only nonlinear behavior but also transparent structure. In this paper, we present a novel and simple technique for camera calibration for machine vision using TSK fuzzy model. The proposed method divides the world into some regions according to camera view and uses the clustered 3D geometric knowledge. TSK fuzzy system is employed to estimate the camera parameters by combining partial information into complete 3D information. The experiments are performed to verify the proposed camera calibration.

• Journal of Integrative Natural Science
• /
• v.8 no.4
• /
• pp.285-292
• /
• 2015

LIM kinases belong to the serine/Threonine kinase family. The members of the LIM kinase (LIMK) family include LIMK 1 and 2 which are involved in the regulation of actin polymerisation and microtubule disassembly. LIMK1 was shown to be involved in cancer metastasis, while LIMK2 activation promotes cells cycle progression. Since LIMK2 plays a vital role in many disease conditions such as pulmonary hypertension, cancer and viral diseases, and till date there are not much selective inhibitors been reported, LIMK2 becomes an interesting therapeutic target among the kinases. 3D QSAR study was carried out on a series of pyrrolopyrimidines based derivatives as LIMK2 inhibitors. A reasonable CoMFA ($q^2$=0.888; ONC=3; $r^2$=0.974) with good statistical values was developed. The developed model was validated using 1000 runs of boostrapping and was found to be predictable. The results of CoMFA contour map analysis suggested that the bulky substitution at $R_4$ and $R_5$ position are highly desirable to increase the activity. Similarly, positive substitution at $R_3$ position is also required to increase the activity. It is also noted that bulky substitution at $R_1$ position must be avoided. Our results could provide valuable information to enhance the activity of the LIMK2 inhibitors and to design potent pyrrolopyrimidines derivatives.