• Journal of the Korean Geophysical Society
• /
• v.8 no.4
• /
• pp.211-214
• /
• 2005

Low resistivity zone is observed at the lower part of a CFRD (Concrete Face Rockfill Dam). Generally, CFRD tends not to have any saturated zone within the body, but the result of resistivity survey shows that it is possible for the dam to be saturated under 20m depth with water. The level of reservoir was under 10 m from the crest. We suspect that this result may come from the wrong 2D inversion process ignoring the 3D geometry of dams. For the analysis of possibility of distortion by different geometry, we perform the 3D forward modeling for the dam and apply the 2D inversion process. And then we check the point of traditional interpretation of resistivity data. By the analysis, it is found that the result of 2D inversion process of 3D geometry of dams, seems to have deep relation with the reservoir level, and the complex 3D structure hide some internal electrical anomaly of dams from resistivity information.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.3
• /
• pp.21-32
• /
• 2003

This paper discusses the design of location optimization visualization and feasibility of 3 dimensional visualization techniques. In generic GIS visualization of location analysis, 2 dimensional visualization techniques have been used to map location elements and model solution, such as displaying demand and supply points, drawing connecting lines(e. g. spider line) of optimal locations to their demands, and representing density of location variations. Nevertheless, current GIS and location analysis literatures have little attentions in 3D visualization applications for location optimization problems. Previous research has been neglected 3D visualization of solution performances and its evaluation of solution quality. Consequently, this paper demonstrates potential benefits of 3D visualization techniques and its appropriate GIS applications for location optimization analysis. The visualization effectiveness of 3D approaches is examined in terms of spatial accessibility, and solution performance of optimal location models is evaluated. Finally, this paper proposes extensive 3D visualization perspectives for location analysis and GIS research as a further research agenda.

• Journal of Sasang Constitutional Medicine
• /
• v.19 no.2
• /
• pp.30-39
• /
• 2007

1. Objectives The Face is an important standard for the classification of Sasang Constitution. We are developing 3D Automatic Face Recognition Apparatus(3D-AFRA) to analyse the facial characteristics. This apparatus show us 3D image and data of man's face and measure facial figure data. So we should examine the figure restoration error of 3D Automatic Fare Recognition Apparatus(3D-AFRA) in hardware Error Analysis. 2. Methods We scanned Face status by using 3D Automatic Face Recognition Apparatus(3D-AFRA). And also we scanned Face status by using laser scanner(vivid 9i). We compared facial shape data be restored by 3D Automatic Face Recognition Apparatus(3D-AFRA) with facial shape data that be restorated by 3D laser scanner. And we analysed the average error and the maximum error of two data. 3. Results and Conclusions In frontal face, the average error was 0.48mm. and the maximum error was 4.60mm. In whole face, the average error of was 0.99mm. And the maximum error was 6.64mm. In conclusion, We assessed that accuracy of 3D Automatic Face Recognition Apparatus(3D-AFRA) is considerably good.

• Journal of the Ergonomics Society of Korea
• /
• v.21 no.3
• /
• pp.59-79
• /
• 2002

The purposes of the study were to present the optimum slacks pattern for elementary school girls and to compare and evaluate wearing ease of the slacks. 3D scans using the Cyberware PS motion platform were carried out for 3 subjects who have different body type. The automatic drafting method was programmed by AutoLISP in CAD. Wearing tests using 3D Scanner was done for evaluation of fitness of slacks. Regression analysis, analysis of variance and post-hoc test were performed for statistical analysis of the data by SPSS program. The procedure and results were as follows: The slacks construction components for pattern drafting were derived from 10 horizontal section maps obtained from 3D scans. The automatic drafting was based on the measurements of slacks construction components and the curve of crotch line. The crotch line was drafted using of the arc function in AutoCAD. The total crotch length was calculated using the multiple regression equation. Wearing test represented that the slacks pattern developed to accomodate individual body measurements was estimated more highly than existing patterns.

• Journal of Ocean Engineering and Technology
• /
• v.28 no.4
• /
• pp.331-337
• /
• 2014

We analyzed the 3-D characteristics of the dynamic response of seabed around a submerged breakwater due to wave loading using a 3-D numerical scheme (LES-WASS-3D). Using our model, which considers the wave-structure-sandy seabed interactions in a 3-D wave field, we were able to investigate the 3-D characteristics of the pore-water pressure in the seabed around the submerged breakwater under various incident wave conditions. To verify the 3-D numerical analysis method suggested in this study, we compared the numerical results with the existing experimental results and found good agreement between them. The numerical analysis reveals that high pore-water pressure in the seabed is generated below a large wave height at the front slope of the submerged breakwater. It was also shown that the non-dimensional pore-water pressure in the seabed increases as the wave period increases because the wave energy dissipation decreases on the submerged breakwater and seabed as the wave period increases.

• Journal of information and communication convergence engineering
• /
• v.12 no.3
• /
• pp.186-192
• /
• 2014

Monolithic three-dimensional integrated chips (3D ICs) are an emerging technology that offers an integration density that is some orders of magnitude higher than the conventional through-silicon-via (TSV)-based 3D ICs. This is due to a sequential integration process that enables extremely small monolithic inter-tier vias (MIVs). For a monolithic 3D memory, we first explore the static random-access memory (SRAM) design. Next, for digital logic, we explore several design styles. The first is transistor-level, which is a design style unique to monolithic 3D ICs that are enabled by the ultra-high-density of MIVs. We also explore gate-level and block-level design styles, which are available for TSV-based 3D ICs. For each of these design styles, we present techniques to obtain the graphic database system (GDS) layouts, and perform a signoff-quality performance and power analysis. We also discuss various challenges facing monolithic 3D ICs, such as achieving 50% footprint reduction over two-dimensional (2D) ICs, routing congestion, power delivery network design, and thermal issues. Finally, we present design techniques to overcome these challenges.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.29 no.5
• /
• pp.471-482
• /
• 2016

In this study, we focused on a speed-up of KIESSI-3D program, which is based on FE-IE techniques, by introducing a p-version dynamic infinite element method. In order to evaluate performance of the KIESSI-3D, numerical analyses for eight real-scale SSI problems are carried out. We considered three types of KIESSI-3D numerical models whose radii of near-field soil region($r_0$)are 1.2, 1.5, and 3.0 times of basemat radius of structure(R). In addition, SSI analyses using the SASSI2010 program are carried out used for comparison of accuracy and runtime against those of the KIESSI-3D. Numerical results show that the KIESSI-3D model of $r_0=1.2R$ is enough to give accurate solution. In view of the computing speed, the new KIESSI-3D was up to 25 times faster than the old KIESSI-3D.

• Journal of the Korean Society of Mineral and Energy Resources Engineers
• /
• v.56 no.3
• /
• pp.260-269
• /
• 2019

The application of 3D printing technology in seismic physical modeling was investigated and the related domestic research was conducted. First, seven types of additive manufacturing methods were evaluated. In this report, to confirm the application of 3D printing technology, related studies in domestic and international journals of geophysics were searched and a comprehensive analysis was conducted according to year and the additive manufacturing type. The analysis showed that studies on 3D printing technology have been dominantly conducted since the 2010s, which corresponds to the time when 3D printers were commercialized. Moreover, 87% of the studies used the material extrusion additive manufacturing method, and the research was conducted in specific universities. This research can be used as basic data for application of 3D printing technology in geophysics.

• YAKHAK HOEJI
• /
• v.54 no.6
• /
• pp.441-448
• /
• 2010

In present study, classification and quality control of Genus Polygonatum were developed using the isolated from Polygonati Odorati Rhizoma and Polygonati Rhizoma. 3 components were isolated from Butanol fractions of Polygonati Rhizoma, and 2 components were isolated from Hexane and Butanol fractions of Polygonati Odorati Rhizoma. All the components were obtained using silica gel and ODS column chromatography. The compounds were identified as adenosine, 14-hydroxylfurost-5-ene-3-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}2$)-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}4$)-O-${\beta}$-D-galactopyranosyl-26-O-${\beta}$-D-glucopyranoside, 22-O-methyl-14-hydrocxyfurost-5-ene-3-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}2$)-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}4$)-O-${\beta}$-Dgalactopyranosyl-26-O-${\beta}$-D-glucopyranoside, ${\beta}$-Sitosteryl-3-O-${\beta}$-D-D-glucopyranoside, 14-hydoxylfurost-5-ene-3-O-${\beta}$-Dglucopyranosyl-($1{\rightarrow}2$)-O-[${\beta}$-D-xylopyranosyl-($1{\rightarrow}3$)]-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}4$)-O-${\beta}$-D-galactopyranoside through physicochemical data, spectroscopic methods ($^1H$-NMR, $^{13}C$-NMR, Mass) according references. The quality control of genus Polygonatum were conducted using HPLC quantitative analysis of 14-hydroxylfurost-5-ene-3-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}2$)-O-${\beta}$-D-glucopyranosyl-($1{\beta}4$)-O-${\beta}$-D-galactopyranosyl-26-O-${\beta}$-D-glucopyranoside, 14-hydoxylfurost-5-ene-3-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}2$)-O-[${\beta}$-D-xylopyranosyl-($1{\rightarrow}3$)]-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}4$)-O-${\beta}$-D-galactopyranoside in 30 samples collected throughout Korea and China. This method provided a tool for standardization of mix or misusing the commercial Odorati Rhizoma and Polygonati Rhizoma. As a result, contained quantity of 14-hydroxylfurost-5-ene-3-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}2$)-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}4$)-O-${\beta}$-D-galactopyranosyl-26-O-${\beta}$-D-glucopyranoside was measured $0.008{\pm}0.006%$ and 14-hydoxylfurost-5-ene-3-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}2$)-O-[${\beta}$-D-xylopyranosyl-(13)]-O-${\beta}$-D-glucopyranosyl-($1{\rightarrow}4$)-O-${\beta}$-Dgalactopyranoside was measured $0.026{\pm}0.012%$.

• Fashion & Textile Research Journal
• /
• v.22 no.5
• /
• pp.650-659
• /
• 2020

The present study provides reference data required for the design of clothing for the elderly by analyzing the body surface area during fitness motion based on 3D scan data of Korean elderly women. This study was conducted with the procedures of (1) survey of motions and main muscles for fitness, (2) acquisition of 3D scan data, and (3) analysis of rate of change for body surface area during fitness motion. Acquisition of 3D body scan data was obtained from seven elderly females (age: 64-77). We selected 66 anatomical landmarks (40 upper body and 22 lower body) by referring to previous studies. Body surface was segmented by connecting the landmarks marked on the 3D scan data acquired. Analysis of body surface area was conducted in terms of the change rate of surface area in 9 postures of elbow 0°, 90° and 180° for flexion, shoulder 90°, 180° for flexion, shoulder 0°, 180° for abduction, hip 90° for flexion, and knee 90° for flexion compared to the those in the standing posture. The amount of changes in body surface area were 12%-62% in the upper body, 15%-77% in the arm, and 10%-51% in the lower body. A future study on the rate of change of body surface length is needed; in addition, a study on how to apply the results of body surface area and body surface length analysis to clothing pattern design is also necessary.