• Current Applied Physics
• /
• 제18권11호
• /
• pp.1458-1464
• /
• 2018

An improved method for the preparation of g-$C_3N_4$ is described. Currently, heating (> $400^{\circ}C$) of urea is the common method used for preparing the g-$C_3N_4$. We have found that sonication of melamine in $HNO_3$ solution, followed by washing with anhydrous ethanol, not only reduce the crystallite size of g-$C_3N_4$ but also facilitate intriguing electronic structure and photoluminescence (PL) properties. Moreover, loading of metal (Pt and Ag) nanoparticles, by applying the borohydride reduction method, has resulted in multicolor-emission from g-$C_3N_4$. With the help of PL spectra and local electronic structure study, at C K-edge, N K-edge, Pt L-edge and Ag K-edge by X-ray absorption spectroscopy (XAS), a precise mechanism of tunable luminescence is established. The PL mechanism ascribes the amendments in the transitions, via defect and/or metal states assimilation, between the ${\pi}^*$ states of tris-triazine ring of g-$C_3N_4$ and lone pair states of nitride. It is evidenced that interaction between the C/N 2p and metal 4d/5d orbitals of Ag/Pt has manifested a net detraction in the ${\delta}^*{\rightarrow}LP$ transitions and enhancement in the ${\pi}^*{\rightarrow}LP$ and ${\pi}^*{\rightarrow}{\pi}$ transitions, leading to broad PL spectra from g-$C_3N_4$ organic semiconductor compound.

• 대한인간공학회지
• /
• 제10권2호
• /
• pp.51-55
• /
• 1991

Since slipping has been identified as a major hazard, it is important to understand the mechanism of a slip. Many researches, based on biomechanical studies, had been attempted to do that. Thowever, the correlation between the mechanism of a slip and psychophysical behaviors of people had rarely been verified. For example, the existence of small slips in a forward direction, which do not normally perceived by human subjects, has been established by several experimenters. However, the term "microslips are not perceived by the walkers[4]." has not been examined precisely by any experiments. The objective of this study is, using a Signal Detection Theory (SDT), to define a microslip and slip more quqntitatively with the biomechanical measurement of slip distance. The results showed that, the slip distance around the 3 centimeters, there was a obvious change in the accident detectability of the subject. The conclusion is that it is possible to identify the boundary of a microslip and slip around the 3 centermeters of slip distance.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.3-9
• /
• 2006

HSM(High-speed Machining) is widely used in rapid manufacturing of precision products and molds of various materials. Improvement in cutting efficiency is one of the important subjects in the HSM process. To analyse the dynamic behavior during a very short cutting time, the computational analysis code, LS-DYNA3D, was employed for the simulation of the mechanism of HSM for aluminium 7075. This cutting mechanism includes some difficult points in simulation, for example, material and geometrical non-linearity, high-speed dynamic impact, contact with friction, etc. In this paper, a finite element model considering the strain rate effect is proposed to predict the cutting phenomena such as chip deformation, strain and stress distributions, which will help us to design the HSM process.

• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2001년도 International Symposium on Dietary and Medicinal Antimutgens and Anticarcinogens
• /
• pp.181-181
• /
• 2001

1,2-Dibromo-3-chloropropane (DBCP), a soil fumigant against nematodes, is a genotoxic carcinogen and also is classified by World Wildlife Fund as endocrine disruptors. DBCP has been extensively studied on genotoxicity, carcinogenicity, and damage in male reproductive-related organs. However, information on precise mechanism of mutagenesis and carcinogenesis of DBCP is yet unknown. Thus the mutation spectrum and mechanism of DBCP was determined in lacI transgenic Big Blu $e^{R}$ Rat2 fibroblast cell lines.(omitted)d)

• 한국정밀공학회지
• /
• 제18권5호
• /
• pp.65-73
• /
• 2001

In this paper, a mobile system using multi-wheel steering and driving mechanism is proposed to maximize maneuverability of the wheeled mobile system. Among various possible configurations, the two-wheel steering and driving systems, which is minimal in structural requirement, is proposed to reduce the complexity in actual design and difficulties in control. The system possesses three or four degrees of freedom depending on the orientations of two wheels, one or two for driving and two for steering, which implies that the system's mobility is always less than three DOF. The proposed system, nonetheless, can exactly emulate characteristics of the omnidirectional motion as long as the planned path is smooth i.e., the curvature changes continuously while velocity is not zero. Efficient kinematic and dynamic control algorithms are proposed for position and orientation control of the proposed wheeled mobile system.

• 한국결정성장학회지
• /
• 제22권3호
• /
• pp.158-163
• /
• 2012

본 연구는 석탄 잔사회의 재활용률을 높이기 위하여 잔사회 인공경량골재의 발포기구를 규명하는 것이다. 본 실험의 원료는 잔사회와 준설토이다. 인공경량골재는 10 mm 크기의 구형 성형체를 제조하고, 이를 승온소성법으로 $1200^{\circ}C$에서 $1275^{\circ}C$까지 소결하였다. 인공경량골재의 온도별, 조성별 비중 및 흡수율 등의 물성을 측정하고, 단면과 표면을 관찰하였다. 비중 곡선의 결과 잔사회 함량이 80 wt.%일 때 변곡점을 나타내었다. 잔사회 인공경량골재의 미세구조를 관찰한 결과 잔사회 함량이 80 wt.%를 넘으면 블랙코어가 없고, 자기화 발포로 균일한 미세기공이 다량으로 존재하며, 잔사회 함량이 80 wt.% 이하이면 잔사회 인공경량골재는 블랙코어가 존재하면서 매우 큰 기공이 불균일하게 존재한다.

• 한국물환경학회지
• /
• 제22권5호
• /
• pp.958-967
• /
• 2006

The overall objective of this research was to find out the role of rapid mixing conditions in the species of hydrolyzed Al(III) formed by Al(III) coagulants and to evaluate the distribution of hydrolyzed Al(III) species by coagulant dose and coagulation pH. When an Al(III) salt was added to water, monomers, polymers and solid precipitates may form. Different Al(III) coagulants (alum and PSOM) show to have different Al(III) species distribution over a rapid mixing condition. During the rapid mixing period, for alum, formation of dissolved AI(III) (monomer and polymer) increases, but for PSOM, precipitates of $Al(OH)_{3(S)}$ increases rapidly. During the rapid mixing period, for high coagulant dose, Al-ferron reaction increases rapidly. The kinetic constants, Ka and Kb, derived from AI-ferron reaction. The kinetic constants followed very well the defined tendencies for coagulation condition. For pure water, when the rapid mixing time increased, the kinetic constants, Ka and Kb showed lower values. Also, for raw water, when the rapid mixing time increased, the kinetic constants, Ka and Kb showed lower values. At A/D(Adsorption and Destabilization) and sweep condition, both $Al(OH)_{3(S)}$ and dissolved Al(III) (monomer and polymer) exist, concurrent reactions by both mechanism appear to cause simultaneous precipitation.

• Current Optics and Photonics
• /
• 제7권3호
• /
• pp.237-247
• /
• 2023

In middle- and long-distance imaging systems, due to the atmospheric turbulence caused by temperature, wind speed, humidity, and so on, light waves propagating in the air are distorted, resulting in image-quality degradation such as geometric deformation and fuzziness. In remote sensing, astronomical observation, and traffic monitoring, image information loss due to degradation causes huge losses, so effective restoration of degraded images is very important. To restore images degraded by atmospheric turbulence, an image-restoration method based on improved compound multibranch feature fusion (CMFNetPro) was proposed. Based on the CMFNet network, an efficient channel-attention mechanism was used to replace the channel-attention mechanism to improve image quality and network efficiency. In the experiment, two-dimensional random distortion vector fields were used to construct two turbulent datasets with different degrees of distortion, based on the Google Landmarks Dataset v2 dataset. The experimental results showed that compared to the CMFNet, DeblurGAN-v2, and MIMO-UNet models, the proposed CMFNetPro network achieves better performance in both quality and training cost of turbulent-image restoration. In the mixed training, CMFNetPro was 1.2391 dB (weak turbulence), 0.8602 dB (strong turbulence) respectively higher in terms of peak signal-to-noise ratio and 0.0015 (weak turbulence), 0.0136 (strong turbulence) respectively higher in terms of structure similarity compared to CMFNet. CMFNetPro was 14.4 hours faster compared to the CMFNet. This provides a feasible scheme for turbulent-image restoration based on deep learning.

• 한국멀티미디어학회논문지
• /
• 제13권4호
• /
• pp.601-608
• /
• 2010

본 연구는 가상현실 콘텐츠를 제작함에 있어서 공간정보 중심의 파노라마VR(Virtual Reality)과 객체정보 중심의 오브젝트 VR의 단점을 극복하고 3차원 가상현실 콘텐츠를 실사 이미지를 활용하여 효과적으로 제작할 수 있는 새로운 방안을 제시한다. 3차원 VR은 사용자에게 만족할만한 품질을 제공하지만 복잡한 물체에 대한 3차원 모델링 및 랜더링은 많은 비용이 소요된다. 이러한 문제를 해결하기 위해 본 논문은 관찰자 시점에서 관측 가능한 이미지를 빌보드에 매핑하는 방식의 '개선된 빌보드'를 활용하여 3차원으로 모델링을 하지 않고도 실사 이미지를 활용하여 3차원 효과를 나타내는 것을 목표로 한다. 제안된 방법의 타당성을 검증하기 위하여 가상박물관을 구현하고, 3차원 가상공간에 실사 이미지를 이용한 전시물들을 배치하는 통합형 가상현실 콘텐츠를 제작하여 결과를 제시한다.

• Corrosion Science and Technology
• /
• 제20권1호
• /
• pp.26-36
• /
• 2021

Pipes operating in the seawater environment faces cavitation degradation and corrosion of the metallic component, as well as a negative synergistic effect. Cavitation degradation shows the mechanism by which materials deteriorate by causing rapid change of pressure or high-frequency vibration in the solution, and introducing the formation and explosion of bubbles. In order to rate the cavitation resistance of materials, constant conditions have been used. However, while a dynamic cavitation condition can be generated in a real system, there has been little reported on the effect of ultrasonic amplitude on the cavitation resistance and mechanism of composites. In this work, 3 kinds of epoxy coatings were used, and the cavitation resistance of the epoxy coatings was evaluated in 3.5% NaCl at 15 ℃ using an indirect ultrasonic cavitation method. Eleven kinds of mechanical properties were obtained, namely compressive strength, flexural strength and modulus, tensile strength and elongation, Shore D hardness, water absorptivity, impact test, wear test for coating only and pull-off strength for epoxy coating/carbon steel or epoxy coating/rubber/carbon steel. The cavitation erosion mechanism of epoxy coatings was discussed on the basis of the mechanical properties and the effect of ultrasonic amplitude on the degradation of coatings.