• Geomechanics and Engineering
• /
• 제19권3호
• /
• pp.241-254
• /
• 2019

A finite element approach is presented to examine ground vibration characteristics under various moving loads in a homogeneous half-space. Four loading modes including single load, double load, four-load, and twenty-load were simulated in a finite element analysis to observe their influence on ground vibrations. Four load moving speeds of 60, 80, 100, and 120 m/s were adopted to investigate the influence of train speed to the ground vibrations. The results demonstrated that the loading mode in a finite element analysis is reliable for train-induced vibration simulations. Additionally, a three-dimensional finite element model (3D FEM) was developed to investigate the dynamic responses of a track-ballast-embankment-ground system subjected to moving loads induced by high-speed trains. Results showed that vibration attenuations and breaks exist in the simulated wave fronts transiting through different medium materials. These tendencies are a result of the difference in the Rayleigh wave speeds of the medium materials relative to the speed of the moving train. The vibration waves induced by train loading were greatly influenced by the weakening effect of sloping surfaces on the ballast and embankment. Moreover, these tendencies were significant when the vibration waves are at medium and high frequency levels. The vibration waves reflected by the sloping surface were trapped and dissipated within the track-ballast-embankment-ground system. Thus, the vibration amplitude outside the embankment was significantly reduced.

• Earthquakes and Structures
• /
• 제8권5호
• /
• pp.1241-1254
• /
• 2015

Spatially variable ground motions can be significant on the seismic response of a structure due to the incoherency of the incident wave. Incoherence of the incident wave is resulted from wave passage and wave scattering. In this study, wave passage effect on the response spectrum of a building structure built on a soft soil layer was investigated utilizing a finite element program of P3DASS (Pseudo 3-dimensional Dynamic Analysis of a Structure-soil System). P3DASS was developed for the axisymmetric problem in the cylindrical coordinate, but it is modified to apply anti-symmetric input earthquake motions. Study results were compared with the experimental results to verify the reliability of P3DASS program for the shear wave velocity of 250 m/s and the apparent shear wave velocities of 2000-3500 m/s. Studied transfer functions of input motions between surface mat foundation and free ground surface were well-agreed to the experimental ones with a small difference in all frequency ranges, showing some reductions of the transfer function in the high frequency range. Also wave passage effect on the elastic response spectrum reduced the elastic seismic response of a SDOF system somewhat in the short period range.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 춘계학술대회 논문집
• /
• pp.357-362
• /
• 2002

Most of battery industries are growing explosively as a core strategy industry for the development of the semi-conductor, the LCD, and the mobile communication device. In this thesis, dynamic characteristics of the steel can labeling machine on the automatic cell assembly line are studied. Dynamic characteristic analysis consists of dynamic behavior analysis and finite element analysis and is necessary for effective design of machines. In the dynamic behavior analysis, the displacement, velocity, applied force and angular velocity of each components are simulated according to each part. In the FEA, stress analysis, mode analysis, and frequency analysis are performed for each part. The results of these simulations are used for the design specification investigation and compensation for optimal design of cell manufacturing line. Therefore, Virtual Engineering of the steel can labeling machine on the automatic cell assembly line systems are modeled and simulated. 3D motion behavior is visualized under real-operating condition on the computer window. Virtual Prototype make it possible to save time by identifying design problems early in development, cut cost by reducing making hardware prototype, and improve quality by quickly optimizing full-system performance. As the first step of CAE which integrates design, dynamic modeling using ADAMS and FEM analysis using NASTRAN are developed.

• 한국강구조학회 논문집
• /
• 제15권1호
• /
• pp.33-40
• /
• 2003

최근 몇 년 동안 파형강관의 사용이 증가하고 있다. 예전의 연구자들은 강관의 파괴모드를 찌그러짐(crushing)이나 변형(deformation)으로 간주하였다. 그러나 강관의 직경이 커지고 두께가 얇아짐에 따라 상대적으로 작은 변형에서 좌굴이 발생하게 된다. 지중 강관의 좌굴해석에서는 두 가지가 있는데, 하나는 지반을 탄성연속체로 보는 것이고, 또 하나는 강관을 탄성스프링으로 지지한다고 가정하는 Winkler 모델이다. 이 두 가지의 해석방법은 파형을 고려하지 않는 평면해석을 기본으로 하고 있다. 본 논문에서는 좌굴해석 수행시 Winkler 모델을 기본으로 하고, 파형의 효과를 고려하는 3차원해석을 수행하여 좌굴하중에 대한 식을 제안하였다.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2006년도 춘계학술대회 논문집
• /
• pp.136-140
• /
• 2006

We are developing a vol-oxidizer which transforms the spent $UO_2$ pellets into the $U_3O_8$ power through oxidizing process. The vol-oxidizer consists of furnace, filter, heater and valve etc. When the filter is blocked by the powder, the internal pressure of the furnace is increased owing to the air flow restriction. Then, the furnace vessel is swelled and deformed by it. In this paper, we proposed a procedure of the thermal analysis for furnace vessel design of spent fuel vol-oxidizer. In this work, we determined the thickness of the furnace through analyzing the internal pressure and the thermal stress of the furnace with respect to various pressure and temperature. To analyze the thermal stress, we used ANSYS 8.0 for constructing a FEM model of the furnace, and then analyzed it based on the ASME code. We also surveyed the material property and yield stress of SUS304 with various temperature. Analysis results are compared with the yield stress of the material. We manufactured the furnace and conduct the verification experiments.

• 한국산학기술학회논문지
• /
• 제13권5호
• /
• pp.2368-2373
• /
• 2012

본 연구에서는 유동성뒤채움재와 일반모래뒤채움재를 이용한 지하매설관 시공시 발생하는 관의 변형 및 지표면변위를 유한요소해석을 이용하여 평가하였다. 해석에 사용된 조건은 2개의 관종(연성관인 PE관, 강성관인 콘크리트 흄관), 2개의 매설관 직경(30cm 및 60cm), 2개의 매설관 부설깊이(60cm, 150cm), 2개의 굴착폭(1.5D 및 2D), 5종의 뒤채움재(일반모래 및 4종의 유동성뒤채움재) 등을 이용하여, 다양한 조합의 해석을 수행하였다. 연성관인 PE관의 경우 직경 60cm 매설관의 수직변위가 직경 30cm 매설관의 수직변위 보다 평균적으로 3배이상 크게 나타났다. 또한 일반모래 뒤채움시 0.320mm로 나타났고, 이에 비해 유동성뒤채움재를 이용한 Case B, C, D, 및 E에서의 수직변위는 0.135-0.155mm 로 일반모래 뒤채움에 비해 약 40% 수준의 변위가 발생하였다. 강성관인 콘크리트 흄관의 경우 직경 30cm인 경우 수직변위는 뒤채움재 종류에 상관없이 0.004mm 정도이다. 직경 60cm 인 경우 일반모래 뒤채움재의 경우 0.636mm, 유동성 뒤채움재의 경우 0.081-0.121mm 범위로 나타났다. 부설깊이에 따른 유동성뒤채움의 효과는 연성관인 PE관에서 더 크게 나타났다. 강성관인 콘크리트흄관의 경우 부설깊이에 따른 일반모래뒤채움과 유동성뒤채움재에 따른 차이는 거의 없는 것으로 나타났다.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.96-102
• /
• 2007

An Optimal shape design of the boom system in high ladder vehicles is performed using 3-D finite element method (FEM). Results of structural analyses providing displacements, stresses are implemented for the optimum shape design. Lanzcos algorithm is used for the modal analysis in order to find natural frequencies. The optimal shape including cross sectional thickness and length of the boom system is controlled by the subproblem method besed on displacement and Von Mises stress. It is found that a plenty of materials can be saved by using shape design optimization in high ladder vehicles. It is also found that the natural frequency is increased until 6th mode and maintained similarly or decreased after 6th mode.

• 한국자동차공학회논문집
• /
• 제3권6호
• /
• pp.188-198
• /
• 1995

Turbulent flow characteristics of a lean-burn engine were qualitatively studied in order to obtain the optimum design parameters. 3-D lean-burn model engine was made up of an intake port, an intake valve and a cylinder. Computational grids were generated using PATRAN which was a FEM grid-generation software and numerical calculations were performed using STAR-CD. The predicted results showed that swirl and tumble structures were significantly changed by the valve lifts.

• 한국초전도ㆍ저온공학회논문지
• /
• 제14권3호
• /
• pp.28-32
• /
• 2012

The critical current of the HTS(High Temperature Superconductor) tape is governed by cooling temperature, magnetic field and its angle to HTS tape originated from its geometrical structure. At the HTS coil design stage, the critical current of the coil is calculated by considering the Ic-B characteristics of the 2G tape and the operating current is determined based on the critical current. The operating current and the structure of the 5 T coil are suggested through the FEM (Finite Elements Method) analysis and calculation. As a part of our on-going research on a 20 T LTS/HTS magnet, we have designed and constructed a 5 T HTS insert coil and tested it in liquid helium temperature.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.620-622
• /
• 2000

Linear pulse motor have many advantages. (simple control circuit, high stiffness characteristics, etc.) So, it may replace the solenoid as the valve driving device without difficulty and give full play to control the valve accurately. In this paper, we will analyze the LPM for designed proportional control valve and will conform the complex magnetic circuits to be composed LF and TF path.