Browse > Article
http://dx.doi.org/10.5762/KAIS.2012.13.5.2368

FEM Analysis of Controlled Low Strength Materials for Underground Facility with Bottom Ash  

Lee, Kwan-Ho (Dept. of Civil Engineering, Kongju National University)
Lee, Kyung-Jung (Dept. of Civil Engineering, Kongju National University)
Publication Information
Journal of the Korea Academia-Industrial cooperation Society / v.13, no.5, 2012 , pp. 2368-2373 More about this Journal
Abstract
In this research, finite element method was carried out to evaluate the defomation of pipe and surface displacement for backfill of underground ficility. Various conditions for analysis were employer, including two different pipes(PE and concrete pipe), two different excavation depth(60cm and 150cm) and width(1.5D and 2D), a regular sand backfill, and four different flowable backfills. The vertical deformation of 60 cm diameter for PE was measured three times more than that of 30 cm diameter. The measured deformations for regular backfill and four flowable backfills were 0.320mm, and 0.135mm to 0.155mm, respectively. It ratio was around 40%. In case of 30cm diameter of concrete pipe, the measured vertical defomation was around 0.004mm for all the backfill materials. In case of installation depth, the effect of flowable backfill for flexible pipe is better than for rigid pipe. There is little effect on the deformation of concrete pipe with regular sand backfill and flowable backfill.
Keywords
Bottom Ash; Fowable Backfill; Surface Displacement; Vertical Deformation;
Citations & Related Records
연도 인용수 순위
  • Reference
1 Nader Ghafoori, Yuzheng Cai, "Laboratory-Made Roller Compacted Concretes Containing Dry Bottom Ash", ACI Material Journal, 1998, pp.224-251.
2 Korea Midland Power Co. LTD (2008), "Product Technology of Aggregate of Pavement with Bottom Ash, Final Report of KOMIPO, pp. 249.
3 Lee, K. & Kim, S. (2011), "Backfill Materials for Underground Facility with Recycling Materials - Quantification of Design Parameters", Vol. 11, No. 3, Korean Society of Hazard Mitigation, pp. 91-96
4 ASTM (2004), "Innovations in Controlled Low-Strength Materials(Flowable Fill), ASTM STP 1459, pp. 159.