• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.886-889
• /
• 2002

Finite Element Method for 3-D static loaded passenger car tire on the rigid surface is performed for studying the stiffness of tire to compare with experimental data. The tire elements used for FEM are defined each component to allow an easy change for the design parameters. Also, a hyperelastic material which is composed of tread and sidewall has been used to consider a large deformation of rubber components. The orthotropic characters of rubber-cord composite materials are used as well. The air pressure, a vertical and a lateral load are applied step by step and iterated by Modified Newton method for geometric and boundary condition nonlinear simulation. This study shows nonlinear analysis method for tire and the bearing capacity of tire due to the external force.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.34-37
• /
• 2003

Cold forging has several advantages as compared with conventional forming by cutting process. In this study, the elastic deformations of straight bevel gear and die induced by cold forging process are investigated to use 3D-Scanner. So we could estimate the total elastic deformation as comparing between forged bevel gears and die. And finite element analysis has been performed to predict the elastic deformation, each of cold forged bevel gear and die. The predicted values are compared with the experimental values and as a result they are well agreed with experimental data.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.1089-1090
• /
• 2011

This paper presents a novel two-phase two-pole permanent magnet synchronous motor (PMSM) with asymmetric U-core stator structure. The construction and parameters of the novel two-phase U-core PMSM are compared with a conventional U-core single-phase PMSM (SPMSM). Then transient characteristics such as torque, back-emf, and power loss of the both PMSMs are analyzed by using 3-D Finite Element Method (FEM). Under the same condition of rated input current, synchronous speed, similar dimensions and volume, FE results show that the two-phase PMSM with U-core stator has significantly less torque ripple than single-phase U-core PMSM, with similar power loss and efficiency.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.644_645
• /
• 2009

이미 개발된 리니어형 초전도 전류 보상기는 다양한 동작 조건에서 충전 전류 실험을 통해 검증되었고, 고자장 초전도 마그넷용 전류보상기로 적용하기위한 기본적인 특성을 수행하고 있다. 충전전류는 초전도 Nb 박막에 인가되는 자장의 크기와 이동속도(주파수)에 영향을 받아 발생됨이 실험적으로 이미 확인되었다. 특히 인가 주파수가 임계점이상 (20 Hz이상)에서 충전전류가 서서히 감소되는 비선형적인 충전특성이 확인되었다. 본 논문에서는 초전도 Nb 박막에 침투되는 자장의 분포를 3D FEM을 이용하여 자장분포 해석을 수행하였다. 초전도 Nb 박막에 인가되는 자속의 이동속도에 따른 침투영역의 크기 변화를 근거로 침투자속에 따른 초전도 Nb 박막의 비선형성을 확인하였다.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.560-565
• /
• 2007

Motivated by needs such as those in the aerospace industry, this paper demonstrates ability to significantly increase buckling loads of perforated composite laminated plates by synergizing FEM and a genetic optimization algorithm (GA). Plate geometry is discretized into specially-developed 3D degenerated eight-node shell isoparametric layered composite elements. General shell theory, involving incremental nonlinear finite element equilibrium equation, is employed. Fiber orientation within individual plies of each element is controlled independently by the genetic algorithm. Eigen buckling analysis is performed using the subspace iteration method. Available results demonstrate the approach is superior to more conventional methodologies such as modifying ply thickness or the stacking sequence of individual rectilinear plies having common fiber orientation through the plate.

• Journal of the Korean Society of Combustion
• /
• v.23 no.1
• /
• pp.13-20
• /
• 2018

Transverse acoustic mode in annular combustion chambers affects air-fuel mixing characteristics in the nozzle and can result in heat release fluctuations in the combustor. In addition, the acoustic mode coupling between the nozzle and the combustion chamber is one of the key parameters determining combustion instability phenomenon in the annular combustor. In this study, acoustic coupling between the nozzle and annular combustor was numerically analyzed using 3D-based in house FEM code. As a result, it was found that the acoustic mode inside the combustion chamber at anti-node locations of the transverse mode was strongly influenced by the nozzle inlet boundary conditions.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.868-870
• /
• 2001

Salient pole rotor type single phase SRM(switched reluctance motor) can be use axial direction magnetic flux and radial direction magnetic flux at the same time. Then, it has higher energy density per unit volume and can be lessened the shaft length of motor or exciting magnetic force. Additionally, it's durability is good because it is simple structure and driving device. Prototype of Salient pole rotor type single phase SRM was fabricated by using parameters of three phase SRM and 3D FEM analysis. Also, driving device was fabricated for prototype. Speed and torque characteristic was confirmed through the experiments, and flux linkage, which is important parameter of SRM for generating torque, was measured. The induction emf was calculated by using ideal inductance graph and current graph. Calculated emf and measured emf was compared for confirming loss of prototype in this paper.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.661-666
• /
• 2005

In this Paper, to calculate vertical earth pressure affected from several factors in case of rigid buried pipe with cohesionless backfill soil. The result from PENTAGON 3D is compared with several equation's result such as the Janssen, Marston, Spangler, Handy's equation. Result of study shows that vertical earth pressure of each equation is affected by backfill width, backfill depth and wall friction. And vertical earth pressure is linearly increased with backfill depth and backfill width. Marston's equation and Handy's equation are overestimated and FEM(Finite Element method) analysis and Janssen's Silo equation are affected by more backfill depth than backfill width.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.27 no.11
• /
• pp.1881-1888
• /
• 2003

This study show a numerical method to predict roll wear in the roll forming process. Archard's wear model was reformulated in an elemental form to predict volume of roll wear and then wear depth on the roll was calculated using the results of finite element analysis. Abrasive wear occurs at contact area in the roll forming process and the results of simulation are compared with experimental data in production line. The wear simulation approach with 3-D FEM program for roll forming process, SHAPE-RF is in good agreement with it in tendency.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.61-63
• /
• 2002

At recently, it is regarded efficiency of the electric motor. and the development of the electric motor of new concept and research according to the development of new material and a elevation of magnetic property of magnetism material have been processed actively. One of the that, the transverse flux linear electric motor is studing actively about application method in many ways. because it has high power density and efficiency more than a induction motor. In this study we introduce apply field of the electromotor which follows Picture and find out the characteristic using the 3D Finite Element Method(FEM).