• 한국결정성장학회지
• /
• 제6권2호
• /
• pp.229-237
• /
• 1996

액상의 미립자를 이용하여 저온 플라즈마 반응로 안에서 $YBa_{2}Cu_{3}O_{x}$ 초전도체상을 MgO 단결정 위에 in-situ 증착하였다. 금속화합물의 용해도, 분해온도와 용매의 증기압이 이공정 방법에서 중용한 인자로 나타났으며, 초전도체상의 증착실험 조건은 산소분압이 0.3에서 2.7 kPa, 증착온도가 $800^{\circ}C$에서 $940^{\circ}C$까지이었다. 초전도체상을 위한 최적의 증착조건은 CuO 상전이선에 근접하게 나타났다.

• 대한기계학회논문집A
• /
• 제20권9호
• /
• pp.2782-2791
• /
• 1996

The effective longitudinal shear modulus(LSM) of continuous composites is studied theoretically and numerically using 3-phase unit cell model. Circular, hexagonal and rectangular shapes of reinforced fiber are considered to predict the shear modulus as a function of elastic modulus of each phase and volume fraction of interphase and reinforced fiber. It is found that rectangular fiber shape in low fiber volume fraction($v_f$<30%) and circular fiber shape in high volume fraction($v_f$>40%) shows the higher longitudinal shear modulus. Also the obtained values of LSM for rectangular array and by numerical analysis are higher than those of hexagonal array and by theoretical analysis respectively. The reinforcing effects of interphase are more significant in cases of higher fiber volume fraction and circular fiber shape. Not only the spatial distribution and shape of reinforcing fiber but also the volume of interphase have a pronounced effects on the overall LSM. It is also found that the tangent moduous of 2-and 3-phase polymer matrix composites is insensitive to the shape and distribution of reinforcing fibers.

• 한국분말재료학회지
• /
• 제18권3호
• /
• pp.244-249
• /
• 2011

Spherical nanosized cobalt powder with an average size of 150-400 nm was successfully prepared at room temperature from cobalt sulfate heptahydrate ($CoSO_4{\cdot}7H_2O$). Wet chemical reduction method was adopted to synthesize nano cobalt powder and hypophosphorous acid ($H_3PO_2$) was used as reduction agent. Both the HCP and the FCC Co phase were developed while $CoSO_4{\cdot}7H_2O$ concentration ranged from 0.7 M to 1.1 M. Secondary phase such as $Co(OH)_2$ and $CO_3O_4$ were also observed. Peaks for the crystalline Co phase having HCP and FCC structure crystallized as increasing the concentration of $H_3PO_2$, indicating that the amount of reduction agent was enough to reduce $Co(OH)_2$. Consequently, a homogeneous Co phase could be developed without second phase when the $H_3PO_2/CoSO_4{\cdot}7H_2O$ ratio exceeded 7.

• Journal of the Optical Society of Korea
• /
• 제16권2호
• /
• pp.115-120
• /
• 2012

In this paper, we present a method to automatically quantify the three-dimensional (3D) volume of red blood cells (RBCs) using off-axis digital holographic microscopy. The RBCs digital holograms are recorded via a CCD camera using an off-axis interferometry setup. The RBCs' phase image is reconstructed from the recorded off-axis digital hologram by a computational reconstruction algorithm. The watershed segmentation algorithm is applied to the reconstructed phase image to remove background parts and obtain clear targets in the phase image with many single RBCs. After segmenting the reconstructed RBCs' phase image, all single RBCs are extracted, and the 3D volume of each single RBC is then measured with the surface area and the phase values of the corresponding RBC. In order to demonstrate the feasibility of the proposed method to automatically calculate the 3D volume of RBC, two typical shapes of RBCs, i.e., stomatocyte/discocyte, are tested via experiments. Statistical distributions of 3D volume for each class of RBC are generated by using our algorithm. Statistical hypothesis testing is conducted to investigate the difference between the statistical distributions for the two typical shapes of RBCs. Our experimental results illustrate that our study opens the possibility of automated quantitative analysis of 3D volume in various types of RBCs.

• 한국전자통신학회논문지
• /
• 제5권5호
• /
• pp.498-503
• /
• 2010

최근, 전력공급의 안정성과 신뢰성 그리고 고품질화를 위해 인터넷을 기반으로 하는 산업용 디지털 분전반이 새롭게 요구되고 있다. 따라서 본 논문에서는 3상 4선식 전력공급방식을 기반으로 하는 산업용 3상 분전반이 설계된다. 그리고 3상 산업용 분전반을 위한 전력관리 모듈이 시험 제작되며, 끝으로, 3상 전구 부하 시험을 통해 시작품의 3상 전압, 전류 측정 기능이 검증된다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2013년도 추계학술대회
• /
• pp.350-353
• /
• 2013

본 논문에서는 TOF(Time-Of-Flight) 센서에 의해 얻어진 정보로부터 3차원 깊이 영상(depth image)을 추출하기 위한 위상 연산기의 하드웨어 구현을 제안한다. 설계된 위상 연산기는 DCORDIC(Differential COordinate Rotation DIgital Computer) 알고리듬의 vectoring mode를 이용하여 Arctangent 연산을 수행하며, 처리량과 속도를 늘리기 위해 redundant binary 수체계와 pipelined 구조를 적용하였다. 제안된 알고리듬은 고정 소수점 MATLAB 시뮬레이션을 통해 검증하고 최적 데이터 비트 수 및 반복 횟수를 결정하였다. 설계된 위상 연산기는 MATLAB/Simulink와 FPGA 연동을 통해 가상의 3차원 데이터 복원 동작을 검증하였으며, 469 MHz의 클록 주파수로 동작하여 7.5 Gbps의 성능을 갖는 것으로 평가되었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 초전도 자성체 연구회
• /
• pp.42-45
• /
• 2003

The phase transformation of $REBa_2Cu_3O_{7-x}$ (RE=Nd, Gd, Dy) was investigated using isothermal heat-treatment and continuous cooling in air. During continuous cooling, the $REBa_2Cu_3O_{7-x}$ (RE=123) superconducting phase with well-distributed $REBa_2Cu_3O_{7-x}$ (RE-211) was obtainde at a cooling rate of $0.001^{\circ}C$/s. Single phase RE-123 (Nd, Gd, Dy) was stable at $1050^{\circ}C$, $1050^{\circ}C$, and $950^{\circ}C$ during isothermal heat-treatment, respectively. Above these temperatures the RE-211 phase existed within the RE-123 grains. The RE-123, RE-211, $BaCu_2Od_2$, and CuO phases coexisted at $50^{\circ}C$ below the partial melting temperature for each respective rare-earth RE-123.

• 한국통신학회논문지
• /
• 제15권1호
• /
• pp.71-79
• /
• 1990

逆바이어스 電壓變化에 따라 終端된 바랙터 리액턴스 變化로부터 發生되는 反射波의 連續的인 位相變化를 擴張시키기 위하여 인덕터와 바랙터를 直列로 連結시킨 回路와 하이브리드 링이 結合된 아나로그 移相器를 動作周波數 10GHz에서 設計하였으며, 分散特性 및 不連續 影響을 考慮하여 마이크로 스트립線路로 製作하였다. 實驗結果, 逆바이어스電壓을 20V가지 變化시킴에 따라 位相은 $52.34^{\circ}$에서 $235.01^{\circ}$까지 變化되므로서 $180^{\circ}$이상의 位相變化를 얻을 수 있었으며, 傳送 損失은 -3.6~14.3dB 및 Return loss는 -16~-18dB(1.37 < VSWR < 2.3)을 나타내었다.

• 전력전자학회논문지
• /
• 제16권3호
• /
• pp.227-233
• /
• 2011

본 논문은 5kW 배터리 충전기용 3상 인터리브드 DC-DC 컨버터 설계 및 실험에 대하여 서술하였으며, 배터리 시스템은 풍력 시스템의 안정화를 위해 사용한다. 배터리 충전기는 배터리, 3상 인터리브드 양방향 DC-DC 컨버터, 직류단, 계통연계형 인버터로 구성된다. 납축전지는 matlab으로 간단한 R-C모델링 하였으며, 스텝 전류 방전 실험에 따라 배터리 파라미터를 구하였다. 3상 인터리브드 DC-DC 컨버터를 이용해 배터리의 전류 리플을 감소시켰으며, 5kW 배터리 충전기를 제작하여 충·방전모드 제어기를 설계하고 실험하였다.

• Journal of the Optical Society of Korea
• /
• 제19권3호
• /
• pp.297-302
• /
• 2015

Terahertz (THz) wave generation from bulk and periodically poled $LiTaO_3$ (PPLT) with a Cherenkov phase matching scheme is numerically investigated. It is shown that by using the crystal birefringence of bulk $LiTaO_3$ and a grating vector of PPLT, THz waves can be efficiently generated by difference frequency generation (DFG) with a Cherenkov phase matching scheme. The frequency tuning characteristics of the THz wave via varying wavelength of difference frequency waves, phase matching angle, poling period of PPLT and working temperature are theoretically analyzed. The parametric gain coefficient in the low-loss limit and the absorption coefficient of the THz wave during the DFG process in the vicinity of polariton resonances are numerically analyzed. A THz wave can be efficiently generated by utilizing the giant second order nonlinearities of $LiTaO_3$ in the vicinity of polariton resonances.