• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.1
• /
• pp.39-50
• /
• 2007

This paper presents 3D infinite elements for the elastodynamic problem with multi-layered half-space. Five different types of infinite elements are formulated by using approximate expressions of multiple wave components for the wave function in multi-layered soil media. They are horizontal, horizontal-corner, vortical, vertical-corner and vertical-horizontal-comer infinite elements. The elements can effectively be used for simulating wane radiation problems with multiple wave components. Numerical example analyses are presented for rigid disk, square footings and embedded footing on homogeneous and layered half-space. The numerical results show the effectiveness of the proposed infinite elements.

• Proceedings of the Korean Information Science Society Conference
• /
• 2012.06a
• /
• pp.200-202
• /
• 2012

공정기술의 발달로 인해 GPU는 빠르게 발전하고 있다. GPU는 영상처리뿐만 아니라 한 번에 많은 양의 데이터를 처리하는 범용 작업에도 많이 쓰이고 있다. 한편, 최근에는 3차원으로 코어를 적층하는 3차원 CPU구조에 대해 많은 연구가 수행되고 있다. 3차원 구조는 코어를 수직으로 적층시켜 내부 연결망의 길이를 크게 줄여주어 성능을 크게 개선하는 장점을 가지고 있다. 이를 반영하여 GPU에도 3차원 구조를 적용하여 GPU의 성능을 향상시키려는 선행연구에 맞춰 본 논문에서는 3차원 구조 GPU의 성능 향상을 저해하는 요소들에 대해서 분석해 보고자한다. 본 논문에서는 선행연구에서 밝힌 메모리 인터페이스에서 발생하는 병목현상 이외에도 주 메모리 큐 용량과 네트워크 방식에 따른 3차원 GPU의 성능향상을 실험을 통하여 알아본다. 실험 결과 주 메모리 큐 용량에 따른 3차원 GPU의 IPC는 가장 큰 사이즈와 가장 작은 사이즈의 차이가 4 미만으로 주 메모리 큐 용량은 3차원 GPU의 성능에 큰 영향을 미치지 않는 것으로 분석된다. 주 메모리로의 읽기 또는 쓰기 요청들을 순서대로 저장하는 큐의 역할이 3차원 구조 GPU의 동작에는 큰 영향을 미치지 않기 때문으로 분석된다. 반면 네트워크 방식에 따른 실험에서는 fly 네트워크 방식에 비해서 crossbar 네트워크 방식이 더 빠른 데이터 통신을 가능하게 해주어 crossbar네트워크 방식에서 IPC수치가 약 14 증가함을 알 수 있다. 두 가지 실험을 통하여 3차원 GPU의 성능에 네트워크 방식 차이가 주 메모리 큐 용량 변화보다 더 큰 영향을 주는 것을 확인할 수 있다.

• Composites Research
• /
• v.18 no.3
• /
• pp.38-46
• /
• 2005

In order to characterize the outstanding performance of three-dimensional (3D) composites, the low velocity impact test has been carried out. 3D fiber structures have been achieved by using the automated tape placement (ATP) process and a stitching method. Materials for the ATP and the stitching process were carbon/epoxy prepreg tapes and Kevlar fibers, respectively. Two-dimensional composites with the same stacking sequence as 3D counterparts have also been fabricated for the comparison of damage tolerance. For the assessment of damage after the impact loading, specimens were subjected to C-Scan nondestructive inspection. Compression after impact (CAI) tests were conducted to evaluate residual compressive strength. The damage area of 3D composites was greatly reduced $(30-40\%)$ compared with that of 2D composites. Although the CAI strength did not show drastic improvement for 3D composites, the ratio of retained strength was $5-10\%$ higher than 2D samples. The effect of stitching on the impact performance was negligible above the energy level of 35 Joules.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.488-491
• /
• 2009

본 논문에서는 응력함수와 Kantorovich method를 이용하여 기저판(substrate)에 인장과 굽힘이 작용할 때 복합재 패치의 3차원 응력을 해석하였다. 면내 방향과 면외 방향의 두 응력함수에 가상 공액일의 법칙(Complementary virtual work principle)을 적용하였으며 복합재 패치의 자유 경계조건과 바닥의 기저판으로부터 전달되는 전단 수직 응력 조건을 부여하였다. 이를 통해서 패치 구조물의 지배방정식을 연립 미분 방정식 형태의 고유치 문제로 변환하여 응력함수를 구하였다. 위 방법의 타당성과 효용성을 검증하기 위한 수치 예제로 cross-ply, angle-ply, quasi-isotropic의 패치 적층 배열을 고려하였으며, 층간 응력함수 값이 자유 경계에서 최고치를 나타내고 패치 중심부로 갈수록 급격히 감소하는 모습을 확인하였다. 제안된 기법은 기저판에 인장하중이 작용하는 경우뿐만 아니라 굽힘 하중이 작용하는 경우에도 정확한 예측이 가능하여, 패치 구조물의 층간 응력을 포함한 3차원 응력을 해석하는데 있어서 효율적인 해석 도구로서 사용할 수 있을 것이라 사료된다.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.1 no.2
• /
• pp.1-13
• /
• 2010

Delamination reduces an elastic buckling load of the laminated composite structures and lead to global structural failure at loads below the design level. Therefore, the problem of the delamination buckling of laminated composite structures has generated significant research interest and has been the subject of many theoretical and experimental investigations. However, questions still remain regarding a complete understanding and details of the phenomena involved. In this paper an efficient finite element model is presented for analyzing the elastic buckling behavior of laminated composite plates with square embedded delamination using a solid element based on a three-dimensional theory. The solid finite element, named by EAS-SOLID8, based on an enhanced assumed strain method is developed. The study for elastic buckling behavior of laminated composite plates with embedded square delaminations are focused on various parameters, such as support condition and width-to-thickness ratio. Both graphs and buckling modes in this paper are good guide for design of the laminated composite plates with embedded square delamination.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.1A
• /
• pp.39-48
• /
• 2012

This study deals with numerical determination of stress intensity factors of adhesively patch-repaired plates with cracks at V-shaped or semicircular notches. The p-convergent anisoparametric model are considered and then three-dimensional virtual crack closure technique is presented using formulations of anisoparametric elements. In assumed displacement fields of an element, strain-displacement relations and three-dimensional constitutive equations are derived with three-dimensional hierarchical shape functions expanded from one-dimensional Lobatto functions. Transfinite mapping technique is used to represent a circular boundary. The present model provides accuracy and simplicity in terms of stress concentration factor, stress distribution, the number of degrees of freedom, and non-dimensional stress intensity factor as compared with previous works in literatures. Stress intensity factors obtained by the three-dimensional virtual crack closure technique are estimated with respect to the variation of width of finite plate, radius of notch root, angular inclination of V-shaped notch, and crack length.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.775-780
• /
• 2007

Rapid Prototyping (RP) is a technology that produces prototype parts from 3D computer aided design model data without intermediate processing technology rapidly. CAD model data are created from 3D object digitizing systems but presented just as 2D data when they are printed as a hard copy or displayed on a monitor. However, Rapid Prototyping Technology fabricates 3D objects the same that CAD data because it transforms designed 3D CAD data into 2D cross sectional data, and manufactures layer by layer deposition sequentially. But most of all the small and medium scale companies which produce a toothbrush, a toy and such like provisions are in difficult situations to buy RP system because it is very expensive. In this paper, we propose a 3D control system adopting open source programs for implementing Rapid Prototyping Technology in order that RP system can be purchase at a moderate price.

• Journal of Korean Society of Steel Construction
• /
• v.26 no.6
• /
• pp.559-570
• /
• 2014

In this study, compression and shear characteristics of laminated rubber bearings and lead rubber bearings with various parameters are investigated by using material and geometric nonlinear three-dimensional finite element analysis. Rubber coupon tests are performed to make a model of the laminated rubber bearings. In addition, the material constants of the rubber are calculated by the curve fitting process of stress-strain relationship. The finite element analysis and experimental tests of the laminate rubber bearings are used to verify the validity of the rubber material constants. It is seen that the compression behavior of the laminated rubber bearings and lead rubber bearings mainly varies depending on the first shape factors and their shear behavior significantly varies depending on the second shape factors. In addition, the horizontal stiffness and energy dissipation capacity of lead rubber bearing are increased when the diameter of a lead bar is increased.

• Proceedings of the Korean Society of Disaster Information Conference
• /
• 2017.11a
• /
• pp.343-344
• /
• 2017

우리나라는 산악지형 특성상 붕적층이 발달한 지역이 많아 도로나 건축물이 계획될 경우 일반적으로 이러한 지역을 배제하는 계획을 수립하게 된다. 그러나 현장 여건상 불가피하게 붕적층 구간을 포함한 건설 계획이 수립될 경우 지반 굴착, 사면 절취로 인해 지반 거동특성이 불안정할 수 있으므로 상세한 사전 조사와 적절한 토공 및 굴착 계획과 시공 중 Feed Back 등이 면밀히 이루어져야 한다. 붕적층 지반은 소량의 토사에 자갈, 호박돌, 전석 등이 혼재되어 있는 상태로 주로 테일러스에 의해 생성되며, 암괴의 함량이 매우 높으며 소량의 풍화된 잔류토사가 혼재된 양상을 보인다. 본 연구에서는 붕적층이 깊게 분포하는 지역, 특히 배면에 지장물(상수도관 등)문제로 인해 발생한 가시설 붕괴지역을 사례로 역해석을 통한 붕적층의 지반정수 재평가를 실시하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.529-530
• /
• 2017

Electrical coupling of monolithic 3D inverter(M3D-INV) consisting of Junctionless FET(JLFET) was investigated. Depending on the thickness of Inter Layer Dielectirc (ILD) between top and bottom JLFETs, $N_{gate}-N_{gate}$ capacitance and transconductance $g_m$ are changed by the gate voltage of bottom JLFET. Therefore, when using a stacked structure with the ILD below tens nm, AC electrical coupling between two transistors in M3D-INV should be considered.