• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.36 no.9
• /
• pp.937-944
• /
• 2012

The thermodynamic characteristics of a trilateral cycle with water as a working fluid have been theoretically investigated for an electric generation system to recover the waste heat of the exhaust gas from a diesel engine used for the propulsion of a large ship. As a result, when a heat source was given, the efficiencies of energy and exergy were maximized by the specific conditions of the pressure and mass flow rate for the working fluid at the turbine(expander) inlet. In this case, as the condensation temperature increased, the volume expansion ratio of the turbine could be reduced properly; however, the exergy loss of the heat source and exergy destruction of the condenser increased. Therefore, in order to recover the waste exergy from the topping cycle, the combined cycle with a bottoming cycle such as an organic Rankine cycle, which is utilized at relatively low temperatures, was found to be useful.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.37 no.2
• /
• pp.171-179
• /
• 2013

The thermodynamic characteristics of a combined cycle applied with a topping cycle such as a trilateral cycle at relatively high temperatures and a bottoming cycle such as an organic Rankine cycle at relatively low temperatures have been theoretically investigated. This is an electric generation system used to recover the waste heat of the exhaust gas from a diesel engine used for the propulsion of a large ship. As a result, when the boundary temperature between the topping and the bottoming cycles increased, the system efficiencies of energy and exergy were simultaneously maximized because the total exergy destruction rate (${\sum}\dot{E}_d$) and exergy loss ($\dot{E}_{out2}$) decreased, respectively. In the case of a marine diesel engine, the waste heat recovery electric generation system can be utilized for additional propulsion power, and the propulsion efficiency was found to be improved by an average of 9.17 % according to the engine load variation, as compared to the case with only the base engine. In this case, the specific fuel consumption and specific $CO_2$ emission of the diesel engine were reduced by an average of 8.4% and 8.37%, respectively.

• Journal of Veterinary Clinics
• /
• v.26 no.4
• /
• pp.340-343
• /
• 2009

A 3-year-old, intact female Poong-san dog was presented with a 4-month history of erosive, erythematous dermatitis unresponsive to systemic antibiotics and glucocorticoids. Crust, erosion, and alopecia were noted on the ear pinnae, bridge of nose, and forelimb. Cytological evaluation of intact pustules showed isolated free-floating rounded acantholytic keratinocytes admixed with non-degenerated neutrophils and eosinophils. Results of histopathologic examination revealed the intra-epidermal pustules with predominant neutrophils, less eosinophils, and isolated and clustered acantholytic cells. A diagnosis of pemphigus foliaceus (PF) was made based on the history, clinical, cytological and histopathological results. The skin lesions had improved after systemic cyclosporine therapy. This case report demonstrates that cyclosporine, an immunosuppressive agent, can be used in the management of PF in dogs.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.4
• /
• pp.296-301
• /
• 2001

Electro-Rheological (ER) fluids belong to a class of colloidal suspensions whose global characteristics can be controlled by the imposition of an appropriate external electrical field upon the fluid domain. The ER fluids for smart hydraulic system are a class of colloidal dispersion which exhibit large reversible changes in their rheological behavior when subjected to external electrical fields. This paper presents experimental results on mechanical properties of an ER fluids subjected to electrical fatigues. As a first step, ER fluid is made of methyl cellulose(MC) ingredient choosing 25% of particle weight-concentration. Following the construction of test for mechanical properties of ER fluid, the shear stress, dynamic yield stress and current density of the ER fluids are experimentally distilled as a function of electric field cycles. The mechanical properties test of operated ER fluids are distilled and compared with those of unused ER fluids.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.8
• /
• pp.61-66
• /
• 2008

Recently, portable devices which require small area and low power consumption employ applications using 3D graphics such as 3D games and 3D graphical user interfaces. We propose an efficient clipping engine algorithm which is suitable in 3D graphics pipeline. The clipping operation is divided into two steps: one is the selection process in the transformation engine and the other is the pixel clipping process in the scan conversion unit. The clipping operation is possible with addition of simple comparator. The clipping for the Y-axis is achieved in the edge walk stage and that for the X and Z-axis is performed in the span processing. The proposed clipping algorithm reduces the operation cycles and the area of of 3D graphics pipelines. We designed a 3D graphics pipeline with the proposed clipping algorithm using Verilog-HDL and verifies the operation using an FPGA.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.158-158
• /
• 1999

NiO 박막은 전자비임증착법과 RF-스퍼터링법으로 제작하여 박막의 성능을 평가하였다. NiO 박막의 성능평가를 위한 착색과 탈색은 전기적 착색셀을 제작하여 순환전압전류법으로 KOH 전해질 내에서 반복수행하였으며 성능이 퇴화된 박막의 투과율은 가시광선 분광기로 측정하였다. XPS에 의한 분석결과 막의 낱알 내부보다 낱알 표면에 많은 산소가 포함될수 있음을 알 수 있었다. KOH 전해질 속에서 사이클이 반복 수행된 막의 표면 낱알의 형태는 변하였으며, 3$\times$10-4mbar에서 제작된 시료가 막의 안정성이 좋았다. 제작 방법에 다라 막에 주입 및 추출되는 전하밀도와 투과율의 차이가 나타났고, 니켈 산화물 박막의 성능평가를 하기 위해 착색효율을 계산하였다. 기판물질인 IT(indium tin oxide)의 전기적 착색성과 전해질이 전기적 착색성에 미치는 영향에 대해서도 논의되었다.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.27 no.3
• /
• pp.37-44
• /
• 2004

국내 반도체 산업은 불과 20년도 안 되는 짧은 기간동안에 괄목할만한 성장을 하여 전세계 반도체 생산 규모 면에서 3위 국가로 부상하였으며, 기술 경쟁력 면에서도 한국인의 자존심을 그나마 지켜왔다. 하지만, 반도체 제조는 가장 복잡한 제조공정의 하나로 분류되며, 이러한 복잡한 시스템을 통제하기 위해서는, 다양한 시스템 조건 하에서 적절한 생산전략을 마련하는 것이 필요하다. 그러나, 반도체 제조 시스템에 대한 다양한 상황과 관련한 연구는 많지 않다. 반도체 제조공정 시스템에 대한 스케줄은 생산공정의 재진입, 공정의 높은 불확실성, 급속하게 변하는 제품과 기술과 같은 특성 때문에 반도체 제조공정 시스템에 대한 스케줄은 복잡하고 어려운 작업이며, 사이클타임의 절감 및 단위시간당 생산량의 증대와 같은 시스템 목적을 달성하기 위하여, 반도체 제조 시스템에 대한 좋은 방법을 발견하기 위한 많은 연구가 있었다. 반도체 산업의 생산 흐름은 가장 독특한 특징을 가지고 있으며 생산계획과 반도체 제조의 스케줄링과 계획을 어렵게 하고 있다. 현재 반도체 조립공정에서 수행되고 있는 일정계획은 단순 FCFS (First Come First Serve)에 의한 할당규칙에 따른다. 또한 Backlog(예비재고)를 1일 생산량을 기준으로 Buffer로 운영하고 있다. 따라서 본 연구에서는 효율적인 재고관리와 정확한 스케줄링이 생산의 경쟁력 확보 우위임을 가정하여 다양한 할당규칙(dispatching rule)을 실시간 적용하여 정확한 일정계획 수립의 효과와 결과를 시뮬레이션을 통해 검증하고자 한다. 제시된 방법론을 위하여 시뮬레이션 접근방법이 사용되었다.

• Resources Recycling
• /
• v.29 no.6
• /
• pp.65-72
• /
• 2020

Black dross is a dark gray dross generated during the aluminum recycling process that uses flux, and contains NaCl, KCl, Al2O3, MgO, etc. Black dross is separated into soluble substances (NaCl, KCl) and insoluble substances (Al2O4, MgO) through the dissolution process. Soluble materials can be reused as salt flux, and Al2O3 and MgO can be upcycled to various ceramic materials through the synthesis process. In this study, Mayenite was synthesized using Al2O3 and MgO recovered from black dross, and the synthesis was performed according to the mixing ratio and reaction temperature. It was confirmed that when Mayenite was synthesized using black dross (spinel) and CaCO3, precursors were changed to Mg0.4Al2.4O4 and CaO at 700 ℃, and to Ca12Al14O33 (Mayenite) after 800 ℃. In the mixing conditions experiment, it was confirmed that the Mayenite XRD peak increased with increase of the CaCO3 content, and the Mg0.4Al2.4O4 XRD peak decreased. As a result of the BET analysis of the synthesized powder, the surface area decreased as the fine particles were grown and agglomerated in the process of generating mayenite.

• Journal of Korea Game Society
• /
• v.13 no.3
• /
• pp.85-94
• /
• 2013

In this paper, we propose a scheme to reduce the number of shadow tests conducted during rendering of ray tracing. The shadow test is a very important process in ray tracing to generate photo-realistic images. In the rendering phase, the ray tracer determines whether to cull the shadow test based on information calculated from a shadow test conducted on the kd-tree in the preprocessing phase. In conventional rendering process, the proposed method can be used with little modification. The proposed method is suitable for a static scene, in which the geometry and light source does not change in the same manner as it does in the conventional method. The validity of the proposed scheme is verified and its performance is evaluated during cycle-accurate simulation. Through experiment results, we found that we could reduce up to 17% of the shadow test.

• Solar Energy
• /
• v.13 no.2_3
• /
• pp.65-78
• /
• 1993

An overdose of fossil fuel for greenhouse heating causes not only the high cost and low quality of agricultural products, but also the environmental pollution of farm village. To solve these problems it is desirable to maximize the solar energy utilization for the heating of greenhouse in winter season. In this study phase change materials were selected to store solar energy concentratively for heating the greenhouse and their characteristics of thermal energy storage were analyzed. The results were summarized as follows. The organic $C_{28}H_{58}$, and the inorganic $CH_3COONa{\cdot}3H_2O\;and\;Na_2SO_4{\cdot}10H_2O$ were selected as low temperature latent heat storage materials. The equation of critical radius was derived to define the generating mechanism of the maximum latent heat of phase change materials. The melting point of $C_{28}H_{58}$ was $62^{\circ}C$, and the latent heat was $50.0{\sim}52.0kcal/kg$. The specific heat of liquid and solid phase was $0.54{\sim}0.69kcal/kg^{\circ}C$ and $0.57{\sim}0.75kcal/kg^{\circ}C$ respectively. The melting point of $CH_3COONa{\cdot}3H_2O$ was $61{\sim}62^{\circ}C$, the latent heat was $64.9{\sim}65.8$ kcal/kg and the specific heat of liquid and solid phase was respectively $0.83kcal/kg^{\circ}C$ and $0.51{\sim}0.52kcal/kg^{\circ}C$. The melting point of $Na_2SO_4{\cdot}10H_2O$ was $30{\sim}30.9^{\circ}C$, the latent heat was 53.0 kcal/kg and the specific heat of liquid and solid phase was respectively $0.78{\sim}0.89kcal/kg^{\circ}C$ and $0.50{\sim}0.7kcal/kg^{\circ}C$ When the urea of 21.85% was added to control the melting point of $Na_2SO_4{\cdot}10H_2O$ and the phase change cycles were repeated from 0 to 600, the melting point was $16.7{\sim}16.0^{\circ}C$ and the latent heat was $36.0{\sim}28.0kcal/kg^{\circ}C$.