• Microbiology and Biotechnology Letters
• /
• v.36 no.4
• /
• pp.299-306
• /
• 2008

Human pancreatic lipase is a digestive enzyme which is synthesized in pancreas, secreted into small intestine, and there hydrolyze the fat in food. Pancreatic lipase protein composes of catalytic domain and colipase-binding domain. In this research, the gene segments corresponding to total protein, catalytic domain, and co lipase-binding domain were cloned by PCR method, inserted into an expression vector, and then used to transform Escherichia coli BL21 (DE3). The recombinant proteins produced were purified and injected intramuscularly three times into laying hens. The egg yolk antibodies (IgY) were obtained from the egg yolks and tested for their antibody titer. Among three IgY, the IgY against colipase-binding domain showed the highest antibody titer. All three IgY had inhibitory effects on the porcine pancreatic lipase. Among them, the IgY against colipase-binding domain showed the highest inhibition effects. The fat diet with corn oil and IgY was administrated to the experimental rats and their blood compositions were examined with time course. The triglyceride concentration of treated rats was decrease meaningfully when compared with those of control rats. This suggested that the IgY against colipase-binding domain antigen inhibited pancreatic lipase in vivo.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.103-110
• /
• 2010

Recently, reducing usage of cement and using by-product of industry such as blast furnace slag and fly-ash have been increased to reduce $CO_2$ gas emission. That apply to construction. As a result, reduction of environmental stress and recycling of resources are expected. In this study, as basic study to the reuse of resources and reduce Environmental Load, comparing and analyzing hardening characteristics and durability as using the blast furnace slag and fly-ash, examining concrete characteristics substituted the three elements for the blast furnace slag and fly-ash and evaluating the relationship as binder. Through this, it want to provide the basic data for mass utilization. Blast furnace slag powder and replaced at fly-ash compressive strength of concrete in the strength of the initial seven days material age lower level of expression significantly compared to the concrete, but, 28 days after the similar or higher compressive strength than the concrete expression of the was. In addition, the reserves replacement of blast furnace slag powder salt injury increasing resistance are seen improvements, according to the conventional blast furnace slag powder study by the chloride ions on the surface of the concrete are improved being fixation salt injury resistance is considered.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.1
• /
• pp.169-178
• /
• 1998

The crystal phases precipitated in various compositions glass of CaO-$SiO_2-P_2O_5$ system, were identified by XRD. E composition (CaO 49.4, $SiO_2\;36.8,\;P_2O_5$ 8.8 wt%) glass in which both apatite(($Ca_{10}(PO_4)_6O$ and $\beta$-wollastonite($CaSiO_3$) crystals would precipitate by heating, was selected as an experimental composition to prepare the glass ceramics with high bending strength and good bioactivity to the living bone. Glass powders of E composition were unidirectionally crystallized at $1050^{\circ}$C in the temperature-gadient furnace and the resultant glass ceramics were characterized. Bending strength of the glass ceramics was also measured. To investigate the bond forming ability between the glass ceramics and living bone tissue, soaking test of glass ceramics in simulated body fluid was carried out. Densed glass ceramics composed of apatite and $\beta$-wollastonite crystal were prepared by unidirectional crystallization under the optimum conditions. (2 0 2) plane of $\beta$-wollastonite crystals tended to grow perpendicularly to the crystallization direction. Average bending strength of this glass ceramics was 186.9 MPa, higher than that of the glass ceramics prepared by isothermal (not directional) crystallization In soaking test, a thin layer of apatite crystallite was formed on surface of the glass ceramics in 3 days. Apatite crystals formed on the glass ceramics could be act a role to make the chemical bond between the glass ceramics and living bone tissue.

• Journal of the Korea Concrete Institute
• /
• v.18 no.2 s.92
• /
• pp.267-274
• /
• 2006

Greenhouse gas reduction will be highlighted as the most pending question in the cement industry in future because the production of Portland cement not only consumes limestone, clay, coal, and electricity, but also release waste gases such as $CO_2,\;SO_3$, and NOX, which can contribute to the greenhouse effect and acid rain. To meet the increase of cement demand and simultaneously comply with the Kyoto Protocol, cement that gives less $CO_2$ discharge should be urgently developed. This study aims to manufacture non-sintering cement(NSC) by adding phosphogypsum(PG) and waste lime(WL) to granulated blast furnace slag(GBFS) as sulfate and alkali activators. This study also Investigates the hydration reaction of NSC through analysis of scanning electron microscopy(SEM), X-ray diffraction(XRD), differential thermal analysis(DTA), and pH. Results obtained from analysis of the hydrate have shown that the glassy films of GBFS are destroyed by the activation of alkali and sulfate, ions eluted from the inside of GBFS react with PG and produce ettringite, and consequently the remaining component in GBFS slowly produced C-5-H(I) gel. Here, PG is considered not only to play the role of simple activator, but also to work as a binder reacting with GBFS.

• Journal of the Korea Institute of Building Construction
• /
• v.17 no.1
• /
• pp.47-54
• /
• 2017

Cement industry is typical carbon-emission industry. If the industrial by-products(granulated blast-furnace slag (GGBFS), fly ash, etc.) are used a large amount, it might be able to reduce cement consumption and mitigate carbon emissions. In this case, however, decrease of early strength is relatively large. Therefore, there is a limitation in increase of the amount of substitute. Considering these circumstances, it would be a good solution to reduce carbon emissions in cement industry to improve the performances of mixed cement through proper alkali-activation in Portland blended cement using GGBFS or fly ash. Therefore, this study prepared concrete in ready-mixed concrete manufacturing facilities with an addition of a binder which used 2.0% modified alkali sulfate activator after mixing Portland cement, GGBFS and fly ash in the ratio of 4:4:2 and assessed its basic properties. The results found the followings: The use of modified alkali-sulfate activator slightly reduced slump and shortened setting time. As a result, bleeding capacity decreased while early strength improved. In addition, there is no big difference in carbonation resistance. It appears that there should be continued experiments and analyses on the related long-term aged specimens.

• Journal of the Korea Institute of Building Construction
• /
• v.19 no.2
• /
• pp.131-138
• /
• 2019

Recently, there are many structures exposed to severe outdoor environments, which results in rapid degradation of durability of the concrete structures. there can be rapid deterioration of the concrete structures from early frost damage due to the insufficient curing in low outdoor temperature condition. The objective of this study is to investigate the effect of thickness change conditions and binding material on early frost damage depth of the concrete exposed to cold weather in winter, and is to clearly assess damage depth of the concrete structure due to early frost damage. Specimens with 300x300x(150, 200, 250, 300mm) were prepared. OPC and OPC+FA+BS were adopted for binders. Test results indicate that the depth of the early frost damage was deeper with the decrease of thickness of members. The brightness of specimens were reduced when the member thickness was thinner. When determining the depth of early frost damage, it can be distinguished into dark color and relatively bright color when dried for approximately 30 minutes in the indoors of $20^{\circ}C$ in temperature and 60% in relative humidity after submerging in water for 24 hours. The dark colored part can be determined easily when measured with vernier calipers.

• Journal of Conservation Science
• /
• v.34 no.3
• /
• pp.167-177
• /
• 2018

The Bayon style Avalokitesvara statue from the $13^{th}$ century Angkor period is on display at the Cambodia Angkor Conservation Office. This statue is composed of dark green felthspathic greywacke, the surface of which has been shown light brown discoloration, detected calcite crystallization. As a result of condition assessment, the statue was damaged due to overlap scaling and cracking. Ultrasonic tests have investigated remarkable physical weathering area, flaking and fragmentation in lower velocity. The physical condition of the statue requires a conservation method that improves the binding power. To protect against salt weathering and to ensure physical stability, new conservation material composed of mixed ethyl silicate and sandstone powder similar to that composing the statue was created. The material affected by damage was removed and replaced with the new conservation material.

• The Journal of the Korea Contents Association
• /
• v.14 no.4
• /
• pp.389-396
• /
• 2014

This study was conducted as the basic research for the replacement of Blast Furnace Slag, Red Mud, Silica Fume, etc., with cement as a solution to the problems arising from the global warming caused by the generation of $CO_2$, and conducted the experimental review to examine the feasibility of matrix having properties identical to those of cement by using the Blast Furnace slag, Red mud, Silica fume, and alkali-activator. For this, by using the the inorganic binder, such as Blast Furnace Slag, Red Mud, Silica Fume, etc., and NaOH, $Na_2SiO_3$ and others as the cement substitute material, the strength characteristic according to the mixture time variation was performed in the tentative experiment. Based on the preceding experiment, this study performed the experiment to analyze the strength properties of hardener through the curing by air-dry temperature, curing by temperature in water, coating curing, and Korean paper curing. For the water curing at $80^{\circ}C$, the compressive strength and flexural strength were found to be the most excellent at the age of the 28th day, and furthermore, it was found that the non-cement hardener could be made, which is considered to affect the production of eco-friendly concrete.

• Journal of Ginseng Culture
• /
• v.3
• /
• pp.54-73
• /
• 2021

The Natural Products Research Institute (NPRI, 生藥硏究所), an institution affiliated with Keijo Imperial University (京城帝國大學), was the predecessor of the NPRI at Seoul National University and a comprehensive research institute that focused on ginseng research during the Japanese colonial era. It was established under the leadership of Noriyuki Sugihara (杉原德行), a professor of the second lecture in pharmacology at the College of Medicine in Keijo Imperial University. Prof. Sugihara concentrated on studying Korean ginseng and herbal medicine beginning in 1926 when the second lecture of pharmacology was established. In addition to Prof. Sugihara, who majored in medicine and pharmacology, Kaku Tenmin (加來天民), an assistant professor who majored in pharmacy; Tsutomu Ishidoya (石戶谷勉), a lecturer who majored in agriculture and forestry; and about 36 researchers actively worked in the laboratory before the establishment of the NPRI in 1939. Among these personnel, approximately 14 Korean researchers had basic medical knowledge, derived mostly from specialized schools, such as medical, dental, and pharmaceutical institutions. As part of the initiative to explore the medicinal herbs of Joseon, the number of Korean researchers increased beginning in 1930. This increase started with Min Byung-Ki (閔丙祺) and Kim Ha-sik (金夏植). The second lecture of pharmacology presented various research results in areas covering medicinal plants in Joseon as well as pharmacological actions and component analyses of herbal medicines. It also conducted joint research with variousinstitutions. Meanwhile, in Gaesong (開城), the largest ginseng-producing area in Korea, the plan for the Pharmaceutical Industry Complex was established in 1935. This was a large-scale project aimed at generating profits through research on and the mass production of drugs and the reformation of the ginseng industry under collaboration among the Gaesong Ministry, Kwandong (關東) military forces, Keijo Imperial University, and private organizations. In 1936 and 1938, the Gyeonggi Provincial Medicinal Plant Research Institute (京畿道立 藥用植物硏究所) and the Herb Garden of Keijo Imperial University (京城帝國大學 藥草園) and Pharmaceutical Factory were established, respectively. These institutions merged to become Keijo Imperial University's NPRI, which wasthen overseen by Prof. Sugihara as director. Aside from conducting pharmacological research on ginseng, the NPRI devoted efforts to the development and sale of ginseng-based drugs, such as Sunryosam (鮮麗蔘), and the cultivation of ginseng. In 1941, the Jeju Urban Test Center (濟州島試驗場) was established, and an insecticide called Pancy (パンシ) was produced using Jeju-do medicinal herbs. However, even before research results were published in earnest, Japanese researchers, including Prof. Sugihara, hurriedly returned to Japan in 1945 because of the surrender of Japanese forces and the liberation of Korea. The NPRI was handed over to Seoul National University and led by Prof. Oh Jin-Sup (吳鎭燮), a former medical student at Keijo Imperial University. Scholars such as Woo Lin-Keun (禹麟根) and Seok Joo-Myung (石宙明) worked diligently to deal with the Korean pharmaceutical industry.