• Smart Media Journal
• /
• v.4 no.1
• /
• pp.33-38
• /
• 2015

In this paper, we propose the methods not only to eliminate ELF(Extremely Low Frequency) EMI(Electro-Magnetic Interference) noice for extending recognition distance, but also to utilize the the PLN for detecting starting instance of a hand gesture using electric potential sensor. First, we measure strength of electric field generated in the smart devices such as TV and phone, and minimize EMI through efficient arrangement of the sensors. Meanwhile, we utilize the 60 Hz PLN to extract the starting point of hand gesture. Thereafter, we eliminate the PLN generated in the smart device and circuit of sensors. And then, we shield the sensors from an electric noise generated from devices. Finally, through analyzing the frequency components according to the gesture of target, we use the low pass filter and the Kalman filter for elimination of remaining electric noise. We analyze and evaluate the proposed ELF-band EMI eliminating method for non-contact remote sensing of the EPS(Electric Potential Sensor). Combined with a detecting technique of gesture starting point, the recognition distance for gestures has been proven to be extended to more than 3m, which is critical for real application.

• Proceedings of the KIPE Conference
• /
• 2016.11a
• /
• pp.171-173
• /
• 2016

일반적으로 대형 버스 및 트럭 등 같은 경우, 부하가 아주 크다. 또한 내리막길이나 장거리 운행 시에 잦은 제동으로 인하여 마찰을 이용한 기존 방식의 브레이크들은 브레이크 파열 및 페이드 현상 때문에 제동 안전성에 문제가 있다. 이러한 제동 부담을 분담하기 위해 현재 보조브레이크(리타더)가 필수적이며, 엔진 계통의 보조브레이크가 아닌 비접촉식 브레이크 같은 친환경 보조브레이크가 요구되고 있다. 그리고 차량 제동시 발생하는 기계에너지를 전기에너지로 회생하여 에너지효율을 향상시키려는 연구가 현재 활발히 진행되고 있다. 본 논문에서는 와전류를 이용한 전자기형 리타더에서 발생되는 전기에너지를 회수하기 위한 전압 제어 방법을 다룰 것이다. 리타더의 제동에너지를 전기에너지로 회생하기 위해 L-C 공진회로로 구성하였다. 리타더를 자여자 유도발전기(Self-Excited Induction Generator)로 모델링 하였고 이를 토대로 시뮬레이션 및 실험을 진행하였다. 자여자 유도발전기의 구동 조건에 대해서 언급하고 이를 파라미터에 따라 3-D map으로 만들었다. 또 회로 중의 FET 게이트에 전압을 인가하는 제어장치의 구동펄스에 따라 바뀌는 공진회로의 전압을 분석하였으며, 이 전압을 제어하기 위하여 PI 제어기를 이용한 알고리즘을 제안하였다. 이 전압을 3상 AC/DC컨버터를 통과한 후 DC/DC컨버터를 통하여 차량 내부의 배터리에 충전되는데 제어를 위해 3상 AC/DC에서의 전압 리플을 MA(Moving Average) 방식의 필터를 사용하여 DC/DC컨버터의 입력에 맞도록 제어하였다. 이와 같이 전자기형 리타더에서 유도되는 전압을 제어기의 제어 펄스에 따라 제어할 수 있으며 Matlab Simulink를 이용하여 리타더의 모델과 그 제어기의 타당성을 보였다. 또 실제 M-G Set 실험을 통하여 그 연관성을 확인하였다.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.3
• /
• pp.313-321
• /
• 2008

오래전부터, 많은 여성들은 자신들의 젊음을 연장하고, 외모를 더 아름답게 가꾸고, 이를 죽을 때까지 유지하는 것을 바래왔다. 이에 의사와 약사들뿐만 아니라, 많은 화장품 연구자들도 노화와 관련된 기술개발에 총력을 기울여 왔다. 따라서, 이들 연구자들은 노화방지를 위한 새로운 원료를 찾고, 이를 안정화하고, 피부로 전달하는 기술개발에 항상 관심을 쏟아왔다. 뛰어난 노화방지 화장품 개발을 위해서, Ubiquinone의 일종인 ldebenone에 대해 연구하였고, 이를 비수계 피부유사막 기술을 가지고 캡슐화하고 약물전달하는 연구를 진행하였다. 먼저, 편광현미경(PM, Polarized Microscope), X-선 회절분석(XRD, X-ray Diffractions) 및 시차주사열량계 (DSC, Differential Scanning Calorimetry)를 이용하여 Idebenone을 담지한 피부유사막 액정을 비수계 조건에서 구조 및 열적특성을 조사하였다. 그 결과 비수계 조건에서도 규칙적으로 패킹(Packing)된 지질이중층(Lipid bilayer)과 용매의 연속층으로 이루어진 고밀집된 라멜라(Lamella) 구조의 형성유무와 이때의 상거동을 확인할 수 있었다. 결론적으로 높은 극성도로인해 물분자와 접촉하면 불안정해지는 경향이 있는 Idebenone을 비수계 조건에서 각질층(SC, Stratum Corneum)과 구조 및 조성이 유사한 피부유사막을 디자인하여 안정하게 캡슐화 하였다. 이를 적용한 화장품은 모든 보관조건에서 유화입자의 안정성을 유지함을 확인하였고, Idebenone의 활성역가 또한 $40^{\circ}C$에서 6개월 동안 약 90%이상을 유지하는 우수한 결과를 나타냈다.

• Journal of Navigation and Port Research
• /
• v.40 no.3
• /
• pp.159-164
• /
• 2016

The goal of this study is to implement a communication system that can monitor the status of the nacelle using the power cable itself, without the dedicated communication lines such as an UTP cable and optical fiber for the offshore wind turbine. An inductive coupling powerline communication system for a MW class offshore wind turbine was proposed and its communication performance was demonstrated. The inductive couplers was designed for operation at up to 500 A using a ferrite composite materials. Field test was carried out on the wind farms of Jeju island. Using the iperf communication test program, we have obtained more than 15 Mbps data transmission rate through the 100 m power cable that was installed between the nacelle and the bottom of the power converter. In the data transmission stability test for a week, there was no failure ever. The minimum transmission rate was 15 Mbps and the average data rate was about 20 Mbps. Next, we have installed an infrared camera inside the nacelle in order to measure the temperature distribution and variation of the nacelle. The real-time thermal image taken by the camera was successfully sent to the monitoring system without error.

• Animal Systematics, Evolution and Diversity
• /
• v.3 no.1
• /
• pp.41-50
• /
• 1987

The osteological characters of Aphyocypris chinensis of subfamily Leuciscinae were examined and the systematic position of this species is discussed through comparison with other species of subfamilies Leucisicinae and Cultrinae. Numbers of the dorsal an danal fin ray, having no symphyseal knob and barbels and separation between dermosphenotic and supraorbital, are in acord with those of subfamily Leuciscine, and the abdominal keel and trigemino-facial nerve foramen of the prootic are more closely related with those of subfamily Cultrinae. But several diagnostic characters detected only in this species are as follows ; 4 infraorbitals, the shape of ethmoid, 5-6 hypurals, the broad orbital width, having no extrascapular, incomplete lateral line and considerable small size.

• Journal of the Korean Arthroscopy Society
• /
• v.3 no.1
• /
• pp.35-39
• /
• 1999

The authors introduce an operative technique which is simple and effective for the treatment of the large prepatellar bursitis, avoiding problems by the conventional open technique such as tender scar, infection and recurrence. We treated three cases of the large refractory prepatellar bursitis caused by acute direct trauma. Bursectomies were performed by using an arthroscope and percutaneous multiple sutures were applied to the overlying skin with mattress fashion. There were no complications after treatment over one year follow-up. We suggest that this technique is very useful, greatly minimizes the chance of recurrence and reduces the possibility of post-operative infection.

• Membrane Journal
• /
• v.17 no.3
• /
• pp.219-232
• /
• 2007

The polyethersulfone(PES)-titanium oxide($TiO_2$) hybrid membranes were prepared by immersion precipitation phase inversion method. The casting solution for the preparation of $PES-TiO_2$ hybrid membrane was provided by adding $TiO_2$ nano particles into the basis polymer solution of 14 wt% and 20 wt% PES/N-methyl-2-pyrrolidone(NMP). The $TiO_2$ loading [wt% ($TiO_2/NMP$)] in eating solution was varied from 0 to 60 wt%. Membrane performance and morphological change of the resulting $PES-TiO_2$ hybrid membranes were discussed in aspect of $TiO_2$ loading, by viscosity, coagulation value and light transmittance of the casting solution, measurement of tensile strength, pore size and contact angle, surface and cross sectional SEM images of the hybrid membrane, and ultrafiltration experiments using the hybrid membrane. According as increase of $TiO_2$ loading in the casting solution, viscosity is increased and coagulation value becomes lower, therefore the thermodynamic instability of the casting solution is increased. It is found that when $TiO_2$ loading is increased, 1) precipitation rate becomes faster while instantaneous demixing is maintained, 2) pure water flux, membrane pore size and compaction stability of the resulting membranes are increased, 3) tensile strength and contact angle are decreased. Dead-end ultrafiltration of bovine serum albumin(BSA) solution using the hybrid membrane shows that membrane performance(flux of BSA solution) enhanced up to 7 times compared with the results obtained using the pure PES membrane(not containing $TiO_2$ particle), due to the increase of hydrophilicity.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.2
• /
• pp.121-126
• /
• 2000

The effect of electroless Ni and Cu plating on $LaNi_5$, $AB_5$ type hydrogen storage alloy was investigated by the various electrochemical techniques such as constant current charge-discharge test, cyclic voltammeoy, and a.c. impedance spectroscopy. Scanning electron microscopy and X-ray diffraction test were conducted for phenomenological logical analyses. Cyclic Voltammetry results show that activation characteristics, cycle life and reaction ,rate were improved through electroless Ni and Cu plating. Compared with bare $LaNi_5$ the charge transfer resistance of electrode was greatly reduced as charge-discharge cycle increases. Therefore, electroless Ni and Cu plating on $LaNi_5$ alloy tends to accelerate the early activation, increasing the cyclic lift of electrode.

• The Journal of the Petrological Society of Korea
• /
• v.24 no.4
• /
• pp.323-335
• /
• 2015

Although the Daljeon Basalt in the Pohang Basin is important for interpreting the basin evolution, its relative chronology, stratigraphic position, and isotopic age still remain controversial. In order to clear up the controversies, this study carried out detailed field investigation to determine its distribution and occurrence together with reanalysis of its previous geochemical data and $^{40}Ar/^{39}Ar$ age dating. Based upon the field investigation, the basalt occurring in the central part of the Pohang basin is composed of three main bodies and a dozen of minor dikes and sills that intruded into the Yeonil Group. Their mineral assemblages consist of phenocrysts such as olivine and clinopyroxene and fine groundmasses of clinopyroxene, plagioclase, olivine, and opaque oxide, impling the porphyritic texture of alkaline basalt. All their geochemical data also show the similar geochemical characteristics in TAS, Zr-Ti, and REE/trace elements distribution diagrams. The samples are plotted on alkalic field in the total alkali-versus-silica diagram and show similar patterns to enrichment oceanic basalt or within plate basalt in trace elements. In addition, $^{40}Ar/^{39}Ar$ isochron age of 13.82Ma is obtained. These results indicate that the Daljeon Basalt is an alkaline intrusive rock belonging to the middle Miocene Yeonil Group.

• Journal of the Korean earth science society
• /
• v.21 no.5
• /
• pp.553-562
• /
• 2000

Daejeonsa basalt in the Mt. Juwang area is composed of 12 lava flows alternate with 9 peperites, and each lava and peperite has variable thickness. Globular peperites yielded in Daejeonsa basalt are mixed basalt clasts with reddish shale. Based on field description, when lava flows over unconsolidated wet shale or injectes into unconsolidated wet shale, peperites were formed at the contacts between lava and shale. Daejeonsa basalt are massive lava flows with rare vesicules: some vesicules are found in upper part of a flow unit. The basalt has mainly pseudomorphs of olivine as phenocryst, and also plagioclase and clinopyroxene phenocrysts in rocks with higher Mg-number. Matrix is mainly subophitic texture, sometimes showing ophitic and intergranular textures due to different cooling rate. Clinopyroxene is augite(Wo$_{41.6}$En$_{45.1}$Fs$_{13.3}$), and plagioclase is mostly labradorite(An$_{55.0}{\sim}_{67.7}$), but some is andesine(An$_{44.3}$) and bytownite(An$_{74.5}$). Oxide minerals are composed of titanomagnetite and ilmenite.