• Journal of Advanced Marine Engineering and Technology
• /
• 제27권1호
• /
• pp.134-144
• /
• 2003

Reactive diffusion couples between Fe-5.8at.%Si and (Si wafer, $FeSi_2$, or FeSi alloy) were heat-treated at 1423k. The only layer of $Fe_3Si$ phase was formed in each diffusion couple. The width of $Fe_3Si$ layer was proportional to square root of diffusion time in each kind of diffusion couple. Growth rate of $Fe_3Si$ layer was relied on the concentration of Si in the supplied source of Si atoms. Interdiffusion coefficient of $Fe_3Si$ has been determined from the derived relation between growth rate constant and interdiffusion coefficient in this work. It was shown that the behavior of Kirkendall's void in $Fe_3Si$ layer was not affected by the kind of Si source. But solid solution $\alpha$ was formed in the diffusion couple between Fe-5.8 at.%Si and $Fe_3Si$ alloy. Kirkendall's voids in diffusional $\alpha$ were neglectively smaller than the case of $Fe_3Si$ phase growth.

• 한국자기학회지
• /
• 제17권3호
• /
• pp.124-127
• /
• 2007

비정질 $Co_{70.5}Fe_{4.5}Si_{15}B_{10}$층을 갖는 자기터널접합(magnetic tunneling junctions; MTJ)를 연구하였다. 비정질 자유층이 MTJ의 스위칭 특성에 미치는 영향을 중점적으로 이해하기 위하여 기존의 사용된 CoFe 그리고 NiFe층들을 대신하여 비정질 강자성체 CoFeSiB을 사용하였다. CoFeSiB은 CoFe과 NiFe보다 각각 낮은 포화자기장($M_s:\;560\;emu/cm^3$)과 높은 자기이방성 상수($K_u:\;0.2800\;erg/cm^3$)를 갖는다. CoFeSiB층들의 사이에 1.0 nm Ru층 삽입시 $-0.003\;erg/cm^3$ 교환결합에너지($J_{ex}$)를 나타내었다. $Si-SiO_2-Ta$ 45/Ru 9.5/IrMn 10/CoFe 7/$AlO_x$/CoFeSiB 7 또는 CoFeSiB (t)/Ru 1.0/CoFeSiB (7-t)/Ru 60(in nm) MTJ 구조의 터널접합에 대하여 실험 및 시뮬레이션 결과를 통하여 낮은 $J_{ex}$에 기인하는 스위칭 자기장(switching field; $H_{sw}$)의 시료 크기 의존성이 나타나는 것을 알 수 있었다. CoFeSiB 합성형 반강자성 구조는 micrometer뿐만 아니라 submicrometer 시료 크기영역에서도 보자력($H_c$)의 감소와 민감도를 증가 시킴으로써 자기 스위칭 특성에 유리한 것으로 확인 되었다.

• 한국주조공학회지
• /
• 제33권3호
• /
• pp.103-112
• /
• 2013

Effect of Fe and Mn contents on the tensile properties of Al-4 wt%Mg-0.9 wt%Si alloy system has been studied. Common phases of Al-4 wt%Mg-0.9 wt%Si alloy system were ${\alpha}$-Al, $Mg_2Si$, ${\alpha}-Al_{12}(Fe,Mn)_3Si$ and ${\beta}-Al_5FeSi$. As Fe content of Al-4 wt%Mg-0.9 wt%Si alloy system increased from 0.15 wt% to above 0.3 wt%, ${\beta}-Al_5FeSi$ compound appeared. When Mn content of the alloy increased from 0.3 wt% to 0.5 wt%, morphology of plate shaped ${\beta}-Al_5FeSi$ compound changed to chinese script ${\alpha}-Al_{12}(Fe,Mn)_3Si$. As Fe content of Al-4 wt%Mg-0.9 wt%Si-0.3 wt%Mn alloy increased from 0.15 wt% to 0.4 wt%, tensile strength of the as-cast alloy decreased from 191 MPa to 183 MPa and, elongation of the alloy also decreased from 8.0% to 6.2%. Decrease of these properties can be explained as the formation of plate shape, ${\beta}-Al_5FeSi$ phase with low Mn/Fe ratio of the alloy. However, when Mn content of Al-4 wt%Mg-0.9 wt%Si-0.3 wt%Fe alloy increased from 0.3 wt% to 0.5 wt%, tensile strength of as-cast alloy increased from 181 MPa to 194 MPa and, elongation of the alloy increased from 6.8% to 7.0%. These improvements attribute to the morphology change from ${\beta}-Al_5FeSi$ phase to chinese script, ${\alpha}-Al_{15}(Fe,Mn)_3Si_2$ phase shape-modified from with high Mn/Fe ratio of the alloy.

• 한국주조공학회지
• /
• 제33권6호
• /
• pp.233-241
• /
• 2013

Effect of Fe and Mn contents on the castability of Al-9wt%Si-xMg-yFe-zMn alloy has been studied. The alloy was composed of ${\alpha}$-Al phase, Al+eutectic Si phase, ${\beta}$-Al5FeSi compound and chinese script ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compound. ${\beta}$-$Al_5FeSi$ and ${\alpha}$-$Al_{15}(Mn,Fe)_3Si_2$ compounds assumed to effect the fluidity and shrinkage behaviors of the alloy during solidification due to the crystallization of ${\alpha}$-$Al_{15}(Fe,Mn)_3Si_2$ and ${\beta}$-$Al_5FeSi$ compounds above eutectic temperature. As Fe and Mn contents of Al-9wt%Si-0.3wt%Mg system alloy increased from 0.15wt% to 0.6wt% and from 0.3wt% to 0.7wt%, fluidity of the alloy decreased by 5.7% and 3.3%, respectively. And as Mg content of Al-9wt%Si-0.45wt%Fe-0.5wt%Mn system alloy increased from 0.3wt% to 0.4wt%, fluidity of the alloy decreased by 8.6%. When Fe content of the alloy increased from 0.15wt% to 0.6wt%, macro shrinkage ratio decreased from 6.1% to 4.1%, and micro shrinkage ratio increased from 0.04% to 0.24%. Similarly, Mn content of the alloy increased from 0.3wt% to 0.7wt%, macro shrinkage ratio decreased from 6.0% to 4.5% and micro shrinkage ratio increased from 0.12% to 0.18%. Judging from the castability of the alloy, Al-9wt%Si-0.3wt%Mg alloy with low content of Fe and Mn, 0.1wt% Fe and 0.3wt% Mn, is recommendable.

• 한국주조공학회지
• /
• 제31권1호
• /
• pp.18-25
• /
• 2011

Effect of Fe and Mn contents on the tensile properties has been studied in Al-9wt%Si-0.3wt%Mg alloy. As Fe content of Al-9wt%Si-0.3wt%Mg-0.5wt%Mn alloy increased from 0.15wt% to 0.45wt%, tensile strength of as-cast alloy decreased from 192 MPa to 174 MPa, and elongation of the alloy also decreased from 4.8% to 4.2%. Decrease of these properties can be explained as the formation of plate shape, ${\beta}-Al_5FeSi$ phase with high Fe/Mn ratio of the alloy. However when Mn content of Al-9wt%Si-0.3wt%Mg-0.45wt%Fe alloy increased from 0.3wt% to 0.5wt%, tensile strength of T6 aged alloy increased from 265 MPa to 275 MPa, and elongation of the alloy increased from 2.3% to 3.6%. These improvements attribute to chinese script, ${\alpha}-Al_{15}(Mn,Fe)_3Si_2$ phase shape-modified from ${\beta}-Al_5FeSi$ phase with low Fe/Mn ratio of the alloy.

• 한국자기학회지
• /
• 제12권4호
• /
• pp.132-136
• /
• 2002

유리기관 위에 이온 빔 증착(ion beam deposition ; IBD)법으로 제작한 버퍼층(buffer layer) Si의 두께에 따른 ［NiFe/FeMn/NiFe］3층박막의 결정성과 교환결합세기(exchange bias field ; H$_{ex}$)를 조사하였다. 버퍼층 Si는 NiFe층을 fcc(111)로 매우 우세하게 초기에 결정성장 시켰다. Si/NiFe 위의 증착된 FeMn층은 ${\gamma}$-fcc(111)구조로 성장함에 따라 안정되고 큰 H$_{ex}$를 가졌고, 버퍼 110 Oe로 거의 일정하였으며, 상부 FeMn/NiFe 이중구조의 H$_{ex}$는 300 Oe까지 증가하였다. 버퍼층이 Ta일 경우와 비교해서 Si일 때 H$_{ex}$와 결정성이 향상되었다.이 향상되었다.

• 한국자기학회지
• /
• 제4권1호
• /
• pp.12-19
• /
• 1994

비정질 $Fe_{73.5}Cu_{1}Nb_{3}Si_{16.5}B_{6}$ 합금의 $552^{\circ}C$에서 등온열처리시간에 따른 결정화 거동을 $M\"{o}ssbauer$ 분광법으로 연구하였다. 열처리된 시료는 $Do_{3}-FeSi$ 초미세결정립, Cu-cluster 및 비정질이 공존함이 $M\"{o}ssbauer$ spectrum 분석에 의해 확인되었다. 결정화 초기단계에 Cu-cluster가 형성되기 때문에 FeSi 초미세결정립의 Si함량은 높아지며, 열처리시간이 60분이 될 때까지 Si함량은 감소하는데 이는 FeSi 초미세결정립의 평균초미세자기장의 증가를 일으키며, 이후 Si함량은 거의 일정하다. 60분 이후의 열처리에서 FeSi 초미세결정립과 잔류비정질의 체적분율이 미소하게 변화함에도 잔류비정질의 평균초미세자기장이 감소하는 것은 잔류비정질에서의 Nb, B원자의 존재비의 증가에 기인된다. $552^{\circ}C$에서 60분 열처리 할 경우 FeSi 초미세결정립과 잔류비정질의 초미세자기장의 방향이 모두 무질서하게 분포된다. FeSi 초미세결정립과 Cu-cluster의 Avrami지수는 각각 0.51, 0.65, 잠복기는 각각 2.4분, 0.8분, 활성화에너지는 각각 2.35 eV, 2.44 eV이며, Cu-cluster가 FeSi 초미세결정립보다 먼저 생성된다는 것은 Cu 원자가 FeSi 초미세결정립의 생성을 촉진시킨다는 해석과 부합한다.

• 한국주조공학회지
• /
• 제33권2호
• /
• pp.55-62
• /
• 2013

Effect of Fe and Mn contents on the castability of Al-4wt%Mg-0.9wt%Si system alloy has been studied. According to the analysis of cooling curve for Al-4wt%Mg-0.9wt%Si-0.3wt%Fe-0.3/0.5wt%Mn alloy, ${\alpha}-Al_{15}(Fe,Mn)_3Si_2$ and ${\beta}-Al_5FeSi$ phases crystallized above eutectic temperature of $Mg_2Si$. Therefore, these phases affected both the fluidity and shrinkage behaviors of the alloy during solidification. As Fe and Mn contents of Al-4wt%Mg-0.9wt%Si system alloy increased from 0.1 wt% to 0.4 wt% and from 0.3 wt% to 0.5 wt% respectively, the fluidity of the alloy decreased by 26% and 33%. When Fe content of the alloy increased from 0.1 wt% to 0.4 wt%, 23% decrease of macro shrinkage and 19% increase of micro shrinkage appeared. Similarly, Mn content of the alloy increased from 0.3 wt% to 0.5 wt%, 11% decrease of macro shrinkage and 14% increase of micro shrinkage appeared. Judging from the castability of the alloy, Al-4wt%Mg-0.9wt%Si alloy with low content of Fe and Mn, 0.1 wt% Fe and 0.3 wt% Mn, is recommendable.

• 한국자기학회지
• /
• 제16권6호
• /
• pp.276-278
• /
• 2006

스위칭 특성을 향상시키기 위하여 비정질 강자성 CoFeSiB 자유층을 갖는 자기터널접합 (MTJ)의 스위칭 특성을 연구하였다. 자기터널접합의 구조는 $Si/SiO_{2}/Ta$ 45/Ru 9.5/IrMn 10/CoFe 10/CoFe $7/AlO_{x}/CoFeSiB\;(t)/Ru\;60\;(nm)$이다. CoFeSiB는 $560\;emu/cm^{3}$의 낮은 포화자화도와 $2800\;erg/cm^{3}$의 높은 이방성 상수를 가졌다. 이러한 특성이 자기터널접합의 낮은 보자력($H_{c}$)과 높은 자장민감도를 갖게 한다. 이것은 또한 Landau-Lisfschitz-Gilbert 방정식에 근거한 미세자기 전산시뮬레이션을 통하여 submicrometersized elements에서도 확인하였다. CoFeSiB 자유층 두께를 증가함으로서 스위칭 특성은 반자화 자기장의 증가로 인하여 더욱더 나빠졌다.

• 산업기술연구
• /
• 제36권
• /
• pp.77-81
• /
• 2016

Superparamagnetic $Fe_3O_4$ nanoparticles with particle size from 10 to 20 nm were synthesized by coprecipitation method. Subsequently, the $Fe_3O_4$ nanoparticles were used to fabricate $Fe_3O_4/SiO_2$ core-shell nanoparticles by sol-gel method. The $Fe_3O_4/SiO_2$ nanoparticles synthesized by sol-gel method exhibit the high uniformities of particle size and shape. We also investigated the heating characteristics of $Fe_3O_4$ and $Fe_3O_4/SiO_2$ nanoparticles for biomedical applications. The $Fe_3O_4$ nanoparticles show the faster temperature increase and the higher specific loss power(SLP) value than the $Fe_3O_4/SiO_2$ nanoparticles.