• Proceedings of the Korea Information Processing Society Conference
• /
• 2015.10a
• /
• pp.1692-1695
• /
• 2015

최근 IoT 기기와 센서의 발전으로 다양한 서비스가 제안되고 있으며, 이를 제어하기 위한 인터페이스나 사용자 인터랙션에 대한 고민이 더욱 깊어지고 있다. 본 연구에서는 삼성의 Tizen 3.0 OS 버전을 기반으로 한 TV에서 IoT를 지원하는 인터페이스 디자인에 관해 설명하고 있다. 이러한 인터페이스를 ETG{EveryThing's Guide)라고 제안하였으며, IoT 시대의 허브 역할로서 사용자가 편안한 인터페이스를 사용할 수 있도록 하는 데 중점을 두었다. IoT 시대를 대비하는 TV나 모바일 기기의 형태는 사용자 중심의 간결하고 직관적인 인터페이스 디자인을 기반으로 하여야 한다. 따라서 구현 사례에서는 사용자에게 직접적으로 필요한 Thing들을 빠르게 접근하고 쉽게 제어할 수 있어야 한다는 점을 설계 시 고려하였다.

• Journal of the Chungcheong Mathematical Society
• /
• v.19 no.2
• /
• pp.111-121
• /
• 2006

All d-homogeneous $C^*$-algebras $T^d$ over $\prod^{s_4}S^4{\times}\prod^{s_2}S^2{\times}\prod^{s_3}S^3{\times}\prod^{s_1}S^1$ are constructed. It is shown that $T^d$ are strongly Morita equivalent to $C(\prod^{s_4}S^4{\times}\prod^{s_2}S^2{\times}\prod^{s_3}S^3{\times}\prod^{s_1}S^1)$.

• Earthquakes and Structures
• /
• v.8 no.3
• /
• pp.555-572
• /
• 2015

This paper presents an experimental study of three two-dimensional (2D/planar) steel reinforced concrete (SRC) T-shaped column-RC beam hybrid joints and six 3D SRC T-shaped column-steel beam hybrid joints under low cyclic reversed loads. Considering different categories of steel configuration types in column cross section and horizontal loading angles for the specimens were selected, and a reliable structural testing system for the spatial loading was employed in the tests. The load-displacement curves, carrying capacity, energy dissipation capacity, ductility and deformation characteristics of the test subassemblies were analyzed. Especially, the seismic performance discrepancies between planar hybrid joints and 3D hybrid joints were intensively compared. The failure modes for planar loading and spatial loading observed in the tests showed that the shear-diagonal compressive failure was the dominating failure mode for all the specimens. In addition, the 3D hybrid joints illustrated plumper hysteretic loops for the columns configured with solid-web steel, but a little more pinched hysteretic loops for the columns configured with T-shaped steel or channel-shaped steel, better energy dissipation capacity & ductility, and larger interlayer deformation capacity than those of the planar hybrid joints. Furthermore, it was revealed that the hysteretic loops for the specimens under $45^{\circ}$ loading angle are generally plumper than those for the specimens under $30^{\circ}$ loading angle. Finally, the effects of steel configuration type and loading angle on the seismic damage for the specimens were analyzed by means of the Park-Ang model.

• Journal of Internet of Things and Convergence
• /
• v.6 no.3
• /
• pp.75-80
• /
• 2020

Recently, the size of the IoT sensor has been decreased and the collecting direction of the IoT sensor for acquiring the data have been changed from 2D to 3D. It makes sensor structure complex. In the fabrication of the complex structure, 3D printing technology has more useful than traditional manufacturing technologies. Among 3D printing technologies, FDM (fused deposition modeling) is a candidate technology to fabricate a small IoT sensor because the price of the machine and the material is cheap. In the FDM process, a 3D shape is made by depositing the melted filament. Recently, the patent of FDM technology is expired and cheat machines are developed based on the open-source. In the FDM process, mechanical properties of a fabricated part is affected by a lots of factors such as the kind of material and process parameters. Among them, infill is affecting the mechanical properties and the production lead time as well. In this work, a new method to optimize the FDM process with the consideration of mechanical property and production lead time was proposed. To verify the method, the fabrications were performed with the different infill rates. The results of tensile tests were analyzed to verify the proposed method.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.18 no.2
• /
• pp.169-177
• /
• 2000

The modelling technique on the terrain of real-world in geo-spatial information system is a primary element for geo-information processing. This paper is designed to make use of TIN in geo-spatial information system and study the development and application of high-precision 3-D spatial analysis technique applied to terrain features. According to this research, MODEL 3 applied to breakline in mild slope/steep slope and MODEL 2 applied to peak in complex region show relatively low RMSE. This consequence proves that these two models have high precision in comparison with other models. This study also finds out optimal routines in the estimation method of slope grade and in the construction method of surface. N_T, LSP_T and LSQ_T in mild slope, N_T in steep slope, and LSQ_T in complex region turn out to be the optimal routines for high-precision 3-D spatial analysis.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.25 no.9
• /
• pp.1325-1333
• /
• 2001

Critical defects in pressure vessels and pipes are generally found in the form of a semi-elliptical surface crack, and the analysis of which is consequently an important problem in engineering fracture mechanics. Furthermore, in addition to the traditional single parameter K or J-integral, the second parameter like T-stress should be measured to quantify the constraint effect. In this work, the validity of the line-spring finite element is investigated by comparing line-spring J-T solutions to the reference 3D finite element J-T solutions. A full 3D-mesh generating program for semi-elliptical surface cracks is employed to provide such reference 3D solutions. Then some structural characteristics of the surface-cracked T and L-joints are studied by mixed mode line-spring finite element. Negative T-stresses observed in T and L-joints indicate the necessity of J-T two parameter approach for analyses of surface-cracked T and L-joints.

• Korean Journal of Pharmacognosy
• /
• v.42 no.4
• /
• pp.302-308
• /
• 2011

As a part of our ongoing program on finding biologically active components from natural source we found three known constituents from the EtOH extract of the wheat bran. The known compounds were identified as tachioside (1), pinellic acid (2) and tryptophan (3). The structure and relative stereochemistry were determined from MS, 1D and extensive 2D NMR techniques as well as by comparison of their data with the published values. All isolates were tested their inhibitory effects on the adipogenesis in 3T3-L1 cells. The effect of compounds from wheat bran on 3T3-L1 adipocyte differentiation were measured by Oil Red O staining. These results demonstrate that tachioside (1) and pinellic acid (2) decreased lipid content in 3T3-L1 adipocytes by inhibiting lipogenesis. These compounds had shown antiobesity activities.

• Journal of the Korean Chemical Society
• /
• v.42 no.1
• /
• pp.78-83
• /
• 1998

It's necessary to develope a facile methodology forming ${\alpha}$-altropyranosidic linkage, for the synthesis of trisaccharide repeating unit of O-antigenic part of Campylobacter jejuni gram negative bacteria. In this paper, the effective synthesis of disaccharides containing ${\alpha}$-altropyranosidic linkage by 1,2-trans glycosidation of allal derivatives was discussed. 4, 6-O-Benzylidene-3-O-(t-butyldimethylsilyl)-D-allal was treated with DMDO (3,3-dimethy ldioxirane) to yield 1,2-anhydro-4, 6-O-benzylidene-3-O-(t-butyldimethylsilyl)-${\beta}$-D-altropyranose. The reaction of 1,2-anhydro-4, 6-O-benzylidene-3-O-(t-butyldimethylsilyl)-${\beta}$-D-altropyranose with allyl alcohol gave allyl 4, 6-O-benzylidene-3-(t-butyldimethylsilyl)-${\alpha}$-D-altropyranoside quantitatively, and reactions with glucals were also successful to prepare ${\alpha}$-altropyranosodic disaccharides. It is convinced that 1,2-trans glycosidation of allal derivatives should be an attractive choice for preparing oligosaccharides containing ${\alpha}$-altropyranosidic linkages.

• Journal of the Korean Magnetics Society
• /
• v.21 no.2
• /
• pp.56-60
• /
• 2011

Optical properties of $T_{0.2}Fe_{2.8}O_4$ (T = V, Cr, Mn) thin films derived from ferrimagnetic $Fe_3O_4$ were investigated by spectroscopic ellipsometry in the 1~8 eV photon-energy range. The difference in optical-absorption spectrum between the ternary compounds and $Fe_3O_4$ was analyzed based on preferable sites in spinel structure and iconicity of the doped V, Cr, and Mn ions. The observed absorption spectra from $Fe_3O_4$ and the ternary compounds can be interpreted as mainly due to charge-transfer transitions of Fe d electrons characterized by absorption structures with wide energy width. Also, the observed absorption structures with narrow energy width can be interpreted as due to crystal-field transitions between different d electron configurations of tetrahedral $Fe^{3+}(d^5)$ ion. The transitions were described in terms of spin-polarized electronic states of $Fe_3O_4$.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.4
• /
• pp.1165-1169
• /
• 2013

To elucidate the role of PKG isoforms in transcriptional control of cyclin D1, we employed a series of expression vectors of PKG $1{\alpha}$ and PKG $1{\beta}$ which encode HA-tagged wild type and constitutively active (SD and ${\Delta}N$) mutants. Our present study demonstrates that both the constitutively active mutants of PKG $1{\beta}$ downregulate the transcription of cyclin D1 when transiently transfected in NIH3T3 cells, whereas PKG $1{\alpha}$ mutants show weak inhibition. We further studied the transcriptional regulators of cyclin D1, such as, c-fos, NF-${\kappa}B$, and CRE by using the luciferase reporter assay. Constitutively active mutants of PKG $1{\beta}$ showed marked transcriptional downregulation of c-fos in NIH3T3 cells, whereas PKG $1{\alpha}$ downregulated c-fos to a lesser extent. We also found that the constitutively active mutants of PKG negatively regulated the activation of NF-${\kappa}B$ and CRE, suggesting their involvement in the regulation of cyclin D1.