1 |
D.G.Kim, H.S.Lee, T.W.Kim and H.W.Lee, "LBS/GPS based Bicycle Safety Application with Arduino," Journal of The Korea Internet of Things, Vol.2, No.1, pp.7-15, 2016.
|
2 |
S.C.Jang and J.W.Lee, "Development of Intelligent IoT Exhaustion System for Bag Filter Collector," Journal of The Korea Internet of Things, Vol.5, No.1, pp.29-34, 2019.
|
3 |
T.K.Kim, "IoT(Internet of Things)-based Smart Trash Can," Journal of The Korea Internet of Things, Vol.6, No.1, pp.17-22, 2020.
|
4 |
T.Wohler, Wohlers report 2018, Wohlers Associates Inc. 2018.
|
5 |
B.Stucker, I.Gibson and D.Rosen, Additive Manufacturing Technologies, 2nd ed., New York: Springer, 2015.
|
6 |
Z.Liu, Y.Wang, B.Wu, C.Cui, Y.Guo and C.Yan, "A Critical Review of Fused Deposition Modeling 3D Printing Technology in Manufacturing Polylatic Acid Parts," The International Journal of Advanced Manufacturing Technology, Vol.102, pp.2877-2889, 2019.
DOI
|
7 |
T.N.A.T.Rahim, A.M.Abdullah and A.H.Akil, "Recent Developments in Fused Deposition Modelling-based 3D Printing of Polymers and their Composites," Polymer Reviews, Vol.59, No.4, pp.589-624, 2019.
DOI
|
8 |
M.Ouhsti, EL.B.Haddadi and S.Belhouideg, "Effect of Printing Parameters of the Mechanical Properties of Parts Fabricated with Open-source 3D Printers in PLA by Fused Deposition Modeling," Mechanics and Mechanical Engineering, Vol.22, No.4, pp.895-908, 2020.
DOI
|
9 |
N.K.Maurya, V.Rastogi and P.Singh, "Experimental Investigations of Improving Part Strength in Fused Deposition Modeling," International Journal of Engineering and Technology, Vol.7, No.39, pp.457-461, 2018.
|
10 |
C.Alvarez, L.Kenny, F.Rodrigo, C.Largos and A.Miguel, "Investigating the Influence of Infill Percentage on the Mechanical Properties of Fused Deposition Modelled ABS Parts," TIngenieria e Investigacion, Vol.36, No.3, pp.110-116, 2016.
|
11 |
K.Ransikarbum, S.Ha, J.Ma and N.Kim, "Multi-objective Optimization Analysis for Part-to Printer Assignment in a Network 3D Fused Deposition Modeling," Journal of Manufacturing Systems, Vol.43, No.1, pp.35-46, 2017.
DOI
|
12 |
H.Li, S.Zhang, Z.Yi, J.Li, A.Sun, J.Guo and G.Xu, "Bonding Quality and Fracture Analysis of Polyamide 12 Parts Fabricated by Fused Deposition Modeling," Rapid Prototyping Journal, Vol.23, No.6, pp.973-982, 2017.
DOI
|
13 |
T.J.Coogan and D.O.Kazmer, "Bond and Part Strength in Fused Deposition Modeling," Rapid Prototyping Journal, Vol.23, No.2, pp.414-422, 2017.
DOI
|
14 |
A.V.Borille, J.D.O.Gomes and D.Lopes, "Geometrical Analysis and Tensile Behaviour of Parts Manufactured with Flame Retardant Polymers by Additive Manufacturing," Rapid Prototyping Journal, Vol.23, No.1, pp.169-180, 2017.
DOI
|
15 |
H.C.Wu and T.C.T.Chen, "Quality Control Issues in 3D-printing Manufacturing: a Review," Rapid Prototyping Journal, Vol.24, No.3, pp.607-614, 2017.
DOI
|