• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.8
• /
• pp.74-85
• /
• 2015

PCI Express is a well-known and widely used de-facto system bus standard for connecting among a processor and IO devices. PCI Express is originated from old PCI standard, and its most of applications are limited to be used within a PC or server system. But, because of its fast speed, low power consumption, and good protocol efficiency, it is considered as one of a good candidate for an alternate system interconnect for many years. In this paper, we present design, implementation and early evaluation of an alternate system interconnect by utilizing PCI Express. The developed alternate system interconnect using PCI Express (named PCIeLINK) utilizes non-transparent bridging (NTB) technic which generally used in fail-over system in PCI and PCI Express. By using NTB technic, PCI Express device can be extended to outside of a system without electrical and logical problems arising during system boot and enumeration. To build up an alternate system interconnect, we designed and implemented a network interface card having multiple PCI Express ${\times}4$ connections (theoretically 20 Gbps) and tested, The early test results revealed that an ${\times}4$ port in the card showed 8.6 Gbps peak performance for bulk transmission and 5.1 Gbps peak for normal TCP/IP transfer.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.691-697
• /
• 2009

Hardware dedicated off-the-shelf maritime differential GPS RSIM lacks the open architecture to meet all the minimum maritime user requirements and to include future GNSS improvements after recapitalization. This paper carries out a study to replace existing hardware dedicated differential GPS RSIM with software differential GPS RSIM in order to make up the weak point of hardware dedicated off-the-shelf maritime differential GPS RSIM. In this paper, the architecture of software RSIM is proposed for maritime DGPS recapitalization. And the feasibility analysis of the proposed software differential GPS RSIM is performed as the first phase to realize the proposed architecture. For the feasibility analysis, the prototype RF module and DSP module are implemented with properties as wide RF bandwidth, high sampling frequency, and high speed transmission interface. This paper shows that the proposed architecture has the possibility of real time operation of software RSIM functionality onto the PC-based platform through the analysis of computation time. Finally, this paper verifies that the L1/L2 dual frequency software differential RSIM designed according to the proposed method satisfies the performance specifications set out in RTCM paper 221-2006-SC104-STD.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.778-784
• /
• 2017

In this paper, we propose wired and wireless distributed control systems designed to improve the freight logistics efficiency and verify wired distributed control systems. The verification condition required that 50 cargo vehicles be connected and operated to travel 21 km from Busan Sinhang station to Jinlye Station at an average speed of about 100km/h. The verification results show that the traction output and braking output of the control and controlled cars are dispersed by the wired distributed control system. The application is expected to more than double the efficiency of the logistics compared to the existing freight transportation system. However, in the case of the wired distributed control system, cable installation and maintenance are difficult, and it is impossible to change the combination of freight vehicles. Through the verification of the wired distributed control system, the applicability of distributed control systems to freight vehicles in Korea was confirmed and the system was further developed to produce a wireless distributed control system. In order to apply the wireless distributed control system, a propagation environment analysis for the ISM band was performed in the testbed and, as a result, it was confirmed that Wifi technology using the ISM band could be utilized. In order to use the WDP (Wireless Distributed Power) devices newly installed in the target vehicles, the transmission / reception control signals associated with the propulsion / braking / total control devices are defined. In the case of wireless distributed control systems, the convenience of their application and operation is guaranteed, but reliability and emergency safety measures should because of the dependence of the control of the vehicle on radio signals.

• Journal of Biosystems Engineering
• /
• v.43 no.4
• /
• pp.285-295
• /
• 2018

Purpose: The aim of this study is to develop a three-wheel riding cultivator for improving the performance of the current four-wheel riding cultivators in the market. Methods: A prototype three-wheel riding cultivator with the rated power of 15.5-kW, a primary hydrostatic and a two-speed selective gear transmission shifts, front/rear three-wheel drive, a hydraulic wheel tread adjustment, and the mid-section attachment of the major implements was designed and constructed. Its specifications and basic performance are investigated. Results: The maximum speeds of the prototype at the low and high stages were measured to be approximately 7.31, and 11.29 km/h in forward travel, respectively, and approximately 3.60, and 6.37 km/h in rearward travel, respectively. The minimum ground clearance is shown to be 670 mm. The rotating speeds of the power takeoff (PTO) shaft at the low and high stages are shown to be approximately 795 and 1,140 rpm, respectively. The tread of the rear wheels, the minimum radius of turning, and the maximum lifting height of the parallel link device are measured to be within 1,320-1,720 mm, 2.80 m, and 390 mm, respectively. Approximately 25.3% and 74.7% of the total weight of the prototype are distributed in the front and rear wheels on flat ground, respectively. When the tread of rear wheels increased from 1,320 to 1,720 mm, the left and right static lateral overturning angles increased from $33.4^{\circ}$ to $39.1^{\circ}$ and from $29.0^{\circ}$ to $36.1^{\circ}$, respectively. Conclusions: The prototype three-wheel riding cultivator showed a wide range of travel and PTO speeds, high minimum ground clearance, small minimum radius of turning, and easy control of the rear wheel tread. Further, the easy observation of cultivating operations by mid-mounting the implements can improve quality of work. Therefore, the prototype is expected to contribute to the riding mechanization of cultivating operations for various upland crops in Korea.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.18 no.5
• /
• pp.3-16
• /
• 2008

A Wireless Sensor Network (WSN for short) is a wireless network consisting of distributed small devices which are called sensor nodes or motes. Recently, there has been an extensive research on WSN and also on its security. For secure storage and secure transmission of the sensed information, sensor nodes should be equipped with cryptographic algorithms. Moreover, these algorithms should be efficiently implemented since sensor nodes are highly resource-constrained devices. There are already some existing algorithms applicable to sensor nodes, including public key ciphers such as TinyECC and standard block ciphers such as AES. Stream ciphers, however, are still to be analyzed, since they were only recently standardized in the eSTREAM project. In this paper, we implement over the MicaZ platform nine software-based stream ciphers out of the ten in the second and final phases of the eSTREAM project, and we evaluate their performance. Especially, we apply several optimization techniques to six ciphers including SOSEMANUK, Salsa20 and Rabbit, which have survived after the final phase of the eSTREAM project. We also present the implementation results of hardware-oriented stream ciphers and AES-CFB fur reference. According to our experiment, the encryption speeds of these software-based stream ciphers are in the range of 31-406Kbps, thus most of these ciphers are fairly acceptable fur sensor nodes. In particular, the survivors, SOSEMANUK, Salsa20 and Rabbit, show the throughputs of 406Kbps, 176Kbps and 121Kbps using 70KB, 14KB and 22KB of ROM and 2811B, 799B and 755B of RAM, respectively. From the viewpoint of encryption speed, the performances of these ciphers are much better than that of the software-based AES, which shows the speed of 106Kbps.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.3-9
• /
• 2017

Recently, in 3rd Generation Partnership Project(3GPP), there is a study of the Long Term Evolution(LTE) based vehicle communication which has been actively conducted to provide a transport efficiency, telematics and infortainment. Because the vehicle communication is closely related to the safety, it requires a reliable communication. Because vehicle speed is very fast, unlike the movement of the user, radio channel is rapidly changed and generate a number of problems such as transmission quality degradation. Therefore, we have to continuously updates the channel estimates. There are five types of conventional channel estimation scheme. Least Square(LS) is obtained by pilot symbol which is known to transmitter and receiver. Decision Directed Channel Estimation(DDCE) scheme uses the data signal for channel estimation. Constructed Data Pilot(CDP) scheme uses the correlation characteristic between adjacent two data symbols. Spectral Temporal Averaging(STA) scheme uses the frequency-time domain average of the channel. Smoothing scheme reduces the peak error value of data decision. In this paper, we propose the novel channel estimation scheme in LTE based Vehicle-to-Vehicle(V2V) environment. In our Hybrid Reliable Channel Estimation(HRCE) scheme, DDCE and Smoothing schemes are combined and finally the Linear Minimum Mean Square Error(LMMSE) scheme is applied to minimize the channel estimation error. Therefore it is possible to detect the reliable data. In simulation results, overall performance can be improved in terms of Normalized Mean Square Error(NMSE) and Bit Error Rate(BER).

• (The) Research of the performance art and culture
• /
• no.37
• /
• pp.157-186
• /
• 2018

Ulsan Soeburi song was reenacted in the 1980s based on the testimony and songs of late Choi Jae man (1987 death), the last blacksmith of the iron production plant at Dalcheon dong, Ulsan in August 1981. The purpose of this study is to analyze Soeburi song from the musical perspective based on 13 kinds of data including video in 1981, and confirm the changing patterns in the tradition process. The derived results are summarized as follows. In the results of examining Soeburi Song data in 2017, the percussion instruments consist of kkwaenggwari 2 (leading small gong 1, follow small gong 1), jing 2 (large gong 2), buk 4 (drum 4), janggu 4 (double headed drum 4), taepyongso 1 (Korean shawm 1), and Jangdan (rhythm) consists of five such as Jilgut, Jajinmori, Dadeuraegi, Deotbaegi, Jajin Deotbaegi. The vocal songs are sung accompanied by the Deotbaegi Jajin Deotbaegi (beat) of quarter small triplet time, or without accompaniment. The scale is mostly Mi La do's third note or Mi La do re's fourth note, and the range does not exceed one octave. All the cadence tones are the same as La. From the results of observing Soeburi song performance until today after the excavation in 1981, it is found that there are four major changes. First, the composition of the music is differentiated into 'long Jajin (slow fast)', and , , and are added. Second, the singing method is based on 'single cantor + multi post singers' since 1980's reenactment, and a single post singer was also specified from time to time. In addition, , which was performed in 2013, became the foundation of . Third, a melodic change of was observed. All beat structures are quarter small triplet time, but the speed gets slow, Mi La do's three notes are skeletonized to be corrected with high re and low sol, and then the characteristics of Menari tori (the mode appeared in the eastern province of the Korean peninsula) are to be clear. Lastly, the four percussion instruments such as kkwaenggwari, jing, janggu, and buk are frequently used, and depending on the performance, sogo (hand drum), taepyongso, yoryeong (bell) are also added. Jangdan played Jajinmori, Dadeuraegi, Deotbaegi and Jajin Deotbaegi from the beginning, and thereafter, the Jilgut Jangdan was added. Through these results as above, it is confirmed that at the time of the first excavation, a simple form of such as has been changed into a male labor song, the purpose of which has changed, and that the playability has become stronger and changed into a performing arts.

• (The) Research of the performance art and culture
• /
• no.20
• /
• pp.5-30
• /
• 2010

It has been diversified and serious attempt to establish the identity of Changgeuk, but it is still independent dramaturgy or the current unformed progressive art. In this situation, exploring works of the identity of changgeuk that is base on the performed individual and specific works in the title of Changgeuk is needed. The 80s and 90s Heo, Gyu was leading an active life as a director who was responsible for directing of Changgeuk. He dramatized Siljeon Pansori -which is a group of Pansori missing text- as well as 5-remained Songs in Pansori and he presented a number of creative Changgeuk works on stage. Especially, the completion of dramatizing 5-remained Songs in Pansori under the name of 'Wanpan Changgeuk -which means full version performance without omit-' is the one of his big achievement by performing "Heungbojeon" on the stage 1982 and "Jeokbyeokga" 1985. The purposes of this research are confirmation of Heo's direction of the formulation and considering its characteristics & significance through 'Wanpan Changgeuk' which written by Heo. Heo was a practical play who was interested in the subjective formulation of national culture and creative transmission for Korean traditional performance. He tried to formulate Changgeuk to a representative performance of Korea. In the process he pointed out those problems, (1) interpretation of a work problem, (2) actor's creative problems, (3) structure problem of theater for Changgeuk. He indicated that the other challenges are to use of the stage & device, to overcome sentimentalism, to stylize acting, to improve own quality, to control the speed and length of the song, to choose the suitable musical accompaniment, to create new repertories problems, and etc. Changgeuk is classified in 3 group by origin, (1)dramatizing of 5-remained Songs, (2)dramatizing of 7-missing Songs, (3)creative dramatizing. It contains all of 3 types that Heo's work. The dramatizing of remained 5 Songs are the great importance among those works. Heo hoped that Chaggeuk has become the most representative art work of Korea by performing 'Wanpan Changgeuk' compiled heritage of Korea's outstanding artistic achievement. The characteristics of 'Wanpan Changgeuk' can be summarized following four. (1) Directing attitudes that emphasizes tradition, (2) Accepting the elements of traditional performance actively, (3) Valuing the classy and ethic, (4) Emphasizing humor and active utilizing of the secondary characters. Heo's 'Wanpan Changgeuk' shows a peak of the artistic level which Changgeuk can be reached. He want to make Changgeuk a Korean representative artistic performance by compiling Pansori heritage and accommodating Korean traditional performance. Heo continued his effort to present Pansori's authenticity and to dramatize from beginning to end without missing. It shows very well that 'Wanpan Changgeuk' takes 4~5 hours for playing. It looks Heo's achievement in the 'Wanpan Changgeuk' influenced Changgeuk significantly since then. Heo's 'Wanpan Changgeuk' is matrix of 'Wanpan JangMak Changgeuk' attempted in the 1990s. Especially, their intent is consistent to synthesize texts and to show all the virtue of Pansori. But 90's 'Wanpan JangMak Changgeuk' aim for large stage, fancy device & costume and variety contents compared with 'Wanpan Changgeuk'. Recently, producers have tried not to make a impressive Changgeuk but to make a interesting one. They usually organize performance within 2 hours and prefer orchestral music to its unique sound. In those point of view, it seems that Heo's idle in 'Wanpan Changgeuk' has become one of target to conquer in these days.

• Journal of Biomedical Engineering Research
• /
• v.25 no.5
• /
• pp.391-401
• /
• 2004

3D imaging systems using 2D phased arrays have a large number of active channels, compelling to use a very expensive and bulky beamforming hardware, and suffer from low volume rate because, in principle, at least one ultrasound transmit-receive event is necessary to construct each scanline. A high speed 3D imaging method using a cross array proposed previously to solve the above limitations can implement fast scanning and dynamic focusing in the lateral direction but suffer from low resolution except at the fixed transmit focusing along the elevational direction. To overcome these limitations, we propose a new real-time volumetric imaging method using a cross array based on the synthetic aperture technique. In the proposed method, ultrasound wave is transmitted successively using each elements of an 1D transmit array transducer, one at a time, which is placed along the elevational direction and for each firing, the returning pulse echoes are received using all elements of an 1D receive array transducer placed along the lateral direction. On receive, by employing the conventional dynamic focusing and synthetic aperture method along lateral and elevational directions, respectively, ultrasound waves can be focused effectively at all imaging points. In addition, in the proposed method, a volume of interest consisting of any required number of slice images, can be constructed with the same number of transmit-receive steps as the total number of transmit array elements. Computer simulation results show that the proposed method can provide the same and greatly improved resolutions in the lateral and elevational directions, respectively, compared with the 3D imaging method using a cross array based on the conventional fixed focusing. In the accompanying paper, we will also propose a new real-time 3D imaging method using a cross array for improving transmit power and elevational spatial resolution, which uses linear wave fronts on transmit.

• The Korean Society of Law and Medicine
• /
• v.23 no.4
• /
• pp.29-74
• /
• 2022

As social disasters occur under the Disaster Management Act, which can damage the people's "life, body, and property" due to the rapid spread and spread of unexpected COVID-19 infectious diseases in 2020, information collected through inspection and reporting of infectious disease pathogens (Article 11), epidemiological investigation (Article 18), epidemiological investigation for vaccination (Article 29), artificial technology, and prevention policy Decision), (3) It was used as an important basis for decision-making in the context of an infectious disease crisis, such as promoting vaccination and understanding the current status of damage. In addition, medical policy decisions using infectious disease data contribute to quarantine policy decisions, information provision, drug development, and research technology development, and interest in the legal scope and limitations of using infectious disease data has increased worldwide. The use of infectious disease data can be classified for the purpose of spreading and blocking infectious diseases, prevention, management, and treatment of infectious diseases, and the use of information will be more widely made in the context of an infectious disease crisis. In particular, as the serious stage of the Disaster Management Act continues, the processing of personal identification information and sensitive information becomes an important issue. Information on "medical records, vaccination drugs, vaccination, underlying diseases, health rankings, long-term care recognition grades, pregnancy, etc." needs to be interpreted. In the case of "prevention, management, and treatment of infectious diseases", it is difficult to clearly define the concept of medical practicesThe types of actions are judged based on "legislative purposes, academic principles, expertise, and social norms," but the balance of legal interests should be based on the need for data use in quarantine policies and urgent judgment in public health crises. Specifically, the speed and degree of transmission of infectious diseases in a crisis, whether the purpose can be achieved without processing sensitive information, whether it unfairly violates the interests of third parties or information subjects, and the effectiveness of introducing quarantine policies through processing sensitive information can be used as major evaluation factors. On the other hand, the collection, provision, and use of infectious disease data for research purposes will be used through pseudonym processing under the Personal Information Protection Act, consent under the Bioethics Act and deliberation by the Institutional Bioethics Committee, and data provision deliberation committee. Therefore, the use of research purposes is recognized as long as procedural validity is secured as it is reviewed by the pseudonym processing and data review committee, the consent of the information subject, and the institutional bioethics review committee. However, the burden on research managers should be reduced by clarifying the pseudonymization or anonymization procedures, the introduction or consent procedures of the comprehensive consent system and the opt-out system should be clearly prepared, and the procedure for re-identifying or securing security that may arise from technological development should be clearly defined.