• Journal of the KSME
• /
• v.20 no.6
• /
• pp.474-488
• /
• 1980

이제까지의 결과를 종합하여 보면 다음과 같은 결론을 얻을 수 있다. 1. 국산 비피막공구는 의 산에 비하여 많은 절삭영역에서 양호한 성능을 가지고 있다. 2. 국산 비피막공구 W2는 중간 절 삭 영역에서 국산 W1과 외산 W3, W4보다 우수한 성능을 나타낸다. 3. W1은 저속이거나 절삭 깊이가 클 때, W2보다 좋은 성능을 가진다. 4. W1은 대체로 플랭크 마모에 의하여, W2는 저속. 저이송에서는 프랭크마모 그리고 그밖의 영역에서는 크레이터 마모에 의하여 수명이 결정된다. 5. 국산 피막공구 CW7은 외산 CW10, 13에 비하여 내마모성이 매우 좋다. 6. 중간절삭영역에서 W 2의 표면조도는 W1, W3, W4에 비하여 훨씬 좋다. 7. 피막층 유무와 피막재질에 따른 국산 및 외산의 절삭력 차이는 거의 없다.

• Journal of Environmental Health Sciences
• /
• v.30 no.1
• /
• pp.1-6
• /
• 2004

This study was performed to estimate the effects of washing of food wastes on temperature, pH, weight and volume reduction and salinity in aerobic composting of food wastes. Weight ratios of food wastes to water in washing were 1:0(Control), 1:1 (W-1), 1:2(W-2), 1:3(W-3) and :4(W-4), respectively. Ratios of food wastes to wood chips in reactor of Control, W-1, W-2, W-3 and W-4 were 5 kg:5 1, respectively. Reactors were operated for 24 days with 1 hour stirring by 1 rpm and 2 hours aeration per day. The increase in the ratio of food wastes to water used in washing resulted in the decrease of the highest reaction temperature and the elongation of the high temperature reaction period. The lowering of the ratio of food wastes to water used in washing resulted in faster pH increase and the steady state in the weight reduction rate and the volume reduction rate of composts. The final salinities of Control, W-1, W-2, W-3 and W-4 were 0.95%, 0.73％, 0.65%, 0.57％ and 0.41％, respectively.

• Wind and Structures
• /
• v.26 no.5
• /
• pp.293-304
• /
• 2018

A numerical study is conducted on the flow characteristics of a rectangular cylinder (chord-to-width ratio C/W = 2 - 10) mounted close to a rigid wall at gap-to-width ratios G/W = 0.25 - 6.25. The effects of G/W and C/W on the Strouhal number, vortex structure, and time-mean drag and lift forces are examined. The results reveal that both G/W and C/W have strong influences on vortex structure, which significantly affects the forces on the cylinder. An increase in G/W leads to four different flow regimes, namely no vortex street flow (G/W < 0.75), single-row vortex street flow ($0.75{\leq}G/W{\leq}1.25$), inverted two-row vortex street flow ($1.25<G/W{\leq}2.5$), and two-row vortex street flow (G/W > 2.5). Both Strouhal number and time-mean drag are more sensitive to C/W than to G/W. For a given G/W, Strouhal number grows with C/W while time-mean drag decays with C/W, the growth and decay being large between C/W = 2 and 4. The time-mean drag is largest in the single-row vortex street regime, contributed by a large pressure on the front surface, regardless of C/W. A higher C/W, in general, leads to a higher time-mean lift. The maximum time-mean lift occurs for C/W = 10 at G/W = 0.75, while the minimum time-mean lift appears for C/W = 2 at the same G/W. The impact of C/W on the time-mean lift is more substantial in single-row vortex regime. The effect of G/W on the time-mean lift is larger at a larger C/W.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.229-238
• /
• 2021

The selective permeate transport characteristics of iodine ion at follicle cell membrane model in thyroid which irradiated by high energy x-ray(linac 6 MV) was investigated. The follicle cell membrane model used in this experiment was a polysulfonated copolymerized membrane of poly(4-vinylpyridine-co-acrylonitrile:VP-AN). The difference of membrane thickness [2 mole AN%(w/w)], fixed carrier concentration[VP-AN%(w/w)], OH- concentration were occurred at difference of I- concentration and quantity of thyroid hormone, respectively. The tensile strength in fixed carrier concentration[VP-AN% (w/w): 0-62 %] of irradiated membrane was found to be decreased about 1.2-1.8 times than non-irradiated membrane. The I- selective permeate initial flux with increase of membrane thickness [2mole AN%(w/w)], fixed carrier concentration[VP-AN%(w/ w)], OH- concentration in irradiated membrane were found to be decreased about 2.1-4.5 times, about 2.2-2.5 times, about 2.1-2.67 times than non-irradiated membrane, respectively. As a result, the quantity of thyroid hormone was decreased at irradiated membrane than non-irradiated membrane. The decrease of thyroid hormone was occurred at hypothyroidism and hyperthyroidism, thyroid cancer, and so on. As the thyroid hormone in cell membrane model were abnormal, cell damages were appeared at cell.

• Journal of the Korean Ceramic Society
• /
• v.21 no.3
• /
• pp.221-230
• /
• 1984

In this study an investigation was made to determine optimum ratio between $SO_3$, MgO and $K_2O$ that maximizes $C_2S$ formation in Clinkering reaction Using response surface analysis method. It was proved that 1) Residual $K_2O$ int he clinker should be converted to $K_2SO_4$ because $K_2SO_4$ has less effect on the burnability than $K_2O$, 2) Optimum ratio if $SO_3$/K2O is 1.5, 3) Optimun balance between $CaSO_4$ and MgO is to be adjusted to such a level that w/o SO3=0.7(w/o MgO-2).4) In case of lack of $K_2O$ free CaO was minimized when $K_2SO_4$=2.3w/o and MgO=1.5w/o but if remaining $K_2O$ was 2w/o free CaI was minimized in the level that $K_2SO_4$=2.3w/o and MgO =1.5 w/o but if remaining $K_2O$ was 2 w/o free CaO was minimized in the level that $K_2SO_4$=4.5w/o and MgO =3.0 w/o.

• Journal of Powder Materials
• /
• v.27 no.4
• /
• pp.293-299
• /
• 2020

W₂C is synthesized through a reaction-sintering process from an ultrafine-W and WC powder mixture using spark plasma sintering (SPS). The effect of various parameters, such as W:WC molar ratio, sintering temperature, and sintering time, on the synthesis behavior of W₂C is investigated through X-ray diffraction (XRD) analysis, scanning electron microscopy (SEM) analysis of the microstructure, and final sintered density. Further, the etching properties of a W₂C specimen are analyzed. A W₂C sintered specimen with a particle size of 2.0 ㎛ and a relative density over 98% could be obtained from a W-WC powder mixture with 55 mol%, after SPS at 1700℃ for 20 min under a pressure of 50 MPa. The sample etching rate is similar to that of SiC. Based on X-ray photoelectron spectroscopy (XPS) analysis, it is confirmed that fluorocarbon-based layers such as C-F and C-F2 with lower etch rates are also formed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.30 no.2
• /
• pp.51-60
• /
• 2018

This study was conducted to observe the effects of gravity and infra-gravity wave of detached submerged breakwater in the coast of Yeongnang-dong, Sokcho, as analyzing continuous wave data by performing field observations on the front area (W0) and rear area (W1, W2). Wave transmission coefficient ($K_t$) of submerged breakwater was analyzed in two parts, short-period wave (gravity wave) and infra-gravity wave. The wave energy reduction effect was analyzed and compared with the value of the design. In case of above wave height 2.0 m at the front area (W0) of the submerged breakwater, the short-period wave height at point W1 is reduced by about 65% and the short-period wave height at point W2 is reduced by about 59%. The depth of crest of submerged breakwater conducted in a sea area differs from the design, and the wave energy reduction effect is analyzed to be smaller than the design plan. The infra-gravity waves were amplified to 2.11 and 1.71 at the W1 and W2 points, respectively, and the wave height at W2 point was smaller than that at W1 point.

• KSBB Journal
• /
• v.9 no.4
• /
• pp.436-442
• /
• 1994

The production of itaconic acid by Aspergillus terreus NRRL 1960 was studied. The optimal culture conditional such as pH, inoculum size and medium composition were established. Maximum production of itaconic acid, $19.18g/\ell$, was obtained when the cultivation was carried out at $37^{\circ}C$ and pH 2.5 for 7days, with medium containing 5%(w/v) glucose, 0.5%(w/v) NH4Cl, 0.2%(w/v) yeast extract 0.1%(w/v) CaC12, 0.1%(w/v) MgSO4 and 0.2%(w/v) NaCl. A proper medium for inoculum culture was found to be 2%(w/v) malt extract. The batch production of itaconic acid with free cells in a stirredtank reactor was not efficient compared to the shake-flask culture.

• Honam Mathematical Journal
• /
• v.42 no.2
• /
• pp.345-358
• /
• 2020

In this paper, we study the concepts of Wijsman lacunary invariant convergence, Wijsman lacunary invariant statistical convergence, Wijsman lacunary ${\mathcal{I}}_2$-invariant convergence (${\mathcal{I}}^{{\sigma}{\theta}}_{W_2}$), Wijsman lacunary ${\mathcal{I}}^*_2$-invariant convergence (${\mathcal{I}}^{\ast}^{{\sigma}{\theta}}_{W_2}$), Wijsman p-strongly lacunary invariant convergence ([W₂N_σθ]_p) of double sequence of sets and investigate the relationships among Wijsman lacunary invariant convergence, [W₂N_σθ]_p, ${\mathcal{I}}^{{\sigma}{\theta}}_{W_2}$ and ${\mathcal{I}}^{\ast}^{{\sigma}{\theta}}_{W_2}$. Also, we introduce the concepts of ${\mathcal{I}}^{{\sigma}{\theta}}_{W_2}$-Cauchy double sequence and ${\mathcal{I}}^{\ast}^{{\sigma}{\theta}}_{W_2}$-Cauchy double sequence of sets.

• Journal of applied mathematics & informatics
• /
• v.16 no.1_2
• /
• pp.461-468
• /
• 2004

Let W(z) be a power series with operator coefficients such that multiplication by W(z) is contractive in C(z). The overlapping space $L(\varphi)$ of H(W) in C(z) is a Herglotz space with Herglotz function $\varphi(z)$ which satisfies $\varphi(z)+\varphi^＊(z^{-1})=2[1-W^{*}(z^{-1})W(z)]$. The identity ${}_{L(\varphi)}={-}_{H(W)}$ holds for every f(z) in $L(\varphi)$ and for every vector c.