• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.957_958
• /
• 2009

2DOF is applied to induction moor in order to supply these weak points of PI speed control method in this paper. and proposed method utilize the combination of the voltage model based on stator equivalent model and the current model based on rotor equivalent model, which enables stable estimation of rotor flux. And it also emphasizes the improvement of the control characteristics in low speed region where established schemes have many problems. To prove the propriety of this paper, the various simulations carried out adequacy and stability using Matlab, and at the same time real system is made, so it is proved. As the results of embodying the system, the robust system is realized.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.196-203
• /
• 2010

2DOF is applied to induction moor in order to supply these weak points of PI torque control method in this paper. and The proposed method utilize the combination of the voltage model based on stator equivalent model and the current model based on rotor equivalent model, which enables stable estimation of rotor flux. To prove the propriety of this paper, the various simulations carried out adequacy and stability using Matlab, and at the same time real system is made, so it is proved. As the results of embodying the system, the robust system is realized.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권2호
• /
• pp.125-125
• /
• 1996

In order to reject the steady-state tracking error, it is common to introduce integral compensators in servosystems for constant reference signals. However, the mathematical model of the plant is exact and no disturbance input exists, the integral compensation is not necessary. From this point of view, a two-degree-of-freedom(2DOF) servosystem has been proposed, in which the integral compensation is effective only when there is a modeling error or a disturbance input. The present paper considers robust stability of this 2DOF servosystem to the unstructured uncertainty of the controlled plant. A robust stability condition is obtained using Riccati inequality, which is independent of the gain of the integral compensator. An example is presented, which demonstrates that the tracking response of the 2DOF servosystem with uncertainty becomes faster when the integral gain made larger under the robust stability condition.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권2호
• /
• pp.57-62
• /
• 1996

In order to reject the steady-state tracking error, it is common to introduce integral compensators in servosystems for constant reference signals. However, the mathematical model of the plant is exact and no disturbance input exists, the integral compensation is not necessary. From this point of view, a two-degree-of-freedom(2DOF) servosystem has been proposed, in which the integral compensation is effective only when there is a modeling error or a disturbance input. The present paper considers robust stability of this 2DOF servosystem to the unstructured uncertainty of the controlled plant. A robust stability condition is obtained using Riccati inequality, which is independent of the gain of the integral compensator. An example is presented, which demonstrates that the tracking response of the 2DOF servosystem with uncertainty becomes faster when the integral gain made larger under the robust stability condition.

• 동력기계공학회지
• /
• 제3권1호
• /
• pp.50-54
• /
• 1999

In order to reject the steady-state tracking error, it is common to introduce integral compensators in servosystems for constant reference signals. However, if the mathematical model of the plant is exact and no disturbance input exists, the integral compensation is not necessary. From this point of view, a two-degree-of-freedom(2DOF) servosystem has been proposed, in which integral compensation is effective only when there is modeling error for disturbance input. The present paper considers the design problem of 2DOF servosystem incorporating an observer. It is shown that if a state feedback gain and a observer gain satisfy a condition, the integral effect does not appear when modeling error or disturbance input exists. This result means that the servosystem does not behave as a 2DOF servosystem.

• 드라이브 ㆍ 컨트롤
• /
• 제19권2호
• /
• pp.1-10
• /
• 2022

Field robots operate in various areas, including construction, agriculture, forestry and manufacturing. Typical tasks of field robots used in various areas include excavation, flattening, and demolition. Such tasks are often accomplished in narrow alleys or indoors. In the case of field robots, there is a limit to working in a small space. Thus, to compensate for these shortcomings, many field robots equipped with Tiltrotators have recently been observed. The advantages of Tiltrotator are improved task efficiency and reduced operating time by reducing unnecessary behavior. We need simulation models that can improve the ability of new people to work and simulate tasks in advance. Thus, in this paper, we developed a simscape-based simulation model and modeling of 6DOF systems for field robots equipped with Tiltrotator. Dynamic modeling of field robot 3D models using Simcape multibody and hydraulic systems of field robots using Simcape Hydraulics were modeled. We applied a PID controller to create a control system that operates along the input angle. Simulation results show that errors occur when comparing input and output angles, but overall, they move along input angles.

• 드라이브 ㆍ 컨트롤
• /
• 제21권3호
• /
• pp.28-35
• /
• 2024

This study compared performances of PID (Proportional Integral Derivative), SMC (Sliding Mode Control), and MPC (Model Predictive Control) strategies applied to a 2DOF (Degree Of Freedom) drone tracking robot. The developed 2DOF robot utilized a depth camera with an IMU (Inertial Measurement Unit), laser pointers, and servo motors to rapidly detect and track objects. Image processing was conducted using the YOLO deep learning model. Through this setup, controllers were attached to the robot to track random drone movements, comparing performances in terms of accuracy and energy consumption. This study revealed that while SMC demonstrated precise tracking without deviating from the path, both PID and MPC controllers showed deviations. Performance-wise, SMC is superior. However, considering economic aspects, PID is more advantageous due to its lower power consumption and relatively minor tracking errors.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제49권3호
• /
• pp.102-110
• /
• 2000

In this paper, Wiener-Hopf design of the two-degree-of-freedom(2DOF) controller configuration is treated for the standard plant model. It is shown that the 2DOF structure makes it possible to treat the design of feedback properties and reference tracking problem separately. Wiener-Hopf factorization technique is used to obtain the optimal controller which minimizes a given quadratic cost index. The class of all stabilizing controllers that yield finite cost index is also characterized. An illustrative example is given for the step reference tracking problem which can not be treated by the conventional H2 controller formula.

• 한국해양공학회지
• /
• 제13권3B호
• /
• pp.91-98
• /
• 1999

In order to reject the steady-state tracking error, it is common to introduce integral compensators in servosystems for constant reference signals. However, if the mathematical model of the plant is exact and no disturbance input exists, the integral compensation is not necessary. From this point of view, a two-degree-of-freedom(2DOF) servosystem has been proposed, in which the integral compensation is effective only when there is a modeling error or a disturbance input. The present paper considers a synthesis problems of this 32DOF servosystem with direct transfer term in the system representation. And, a method how we may obtain a gain such that desirable transient response is achieved, is proposed in the presence of the modelling error and disturbance input.

• Structural Engineering and Mechanics
• /
• 제14권2호
• /
• pp.119-133
• /
• 2002

A beam-column fiber element for the large displacement, nonlinear inelastic analysis of Concrete-Filled Steel Tubes (CFT) is implemented. The method of description is Total Lagrangian formulation. An 8 degree of freedom (DOF) element with three nodes, which has 3 DOF per end node and 2 DOF on the middle node, has been chosen. The quadratic Lagrangian shape functions for axial deformation and the quartic Hermitian shape function for the transverse deformation are used. It is assumed that the perfect bond is maintained between steel shell and concrete core. The constitutive models employed for concrete and steel are based on the results of a recent study and include the confinement and biaxial effects. The model is implemented to analyze several CFT columns under constant and non-proportional fluctuating concentric axial load and cyclic lateral load. Good agreement has been found between experimental results and theoretical analysis.