• 대한핵의학회지
• /
• 제28권3호
• /
• pp.384-390
• /
• 1994

악성 종양의 척추 전이를 진단하는 데 bone scan과 MRI의 소견을 비교하여 보았다. 20명의 악성 종양환자를 대상으로 하였으며 환자의 평균 연령은 60.1 세였고 두 검사의 시행 간격은 평균 16.6일 이었다. 원발암은 폐암이 8명으로 가장 많았고 대장암, 위암, 유방암이 각각 2명, 전립선암, 갑상선암, 악성 임파종이 각각 1명이었으며 3명은 원발 장소를 모르는 전이성 선암 환자였다. 방법으로 척추를 7개의 구역 즉 경추(Cl-C7), 상부 흉추(D1-D4), 중부 흉추(D5-D8), 하부 흉추(D9-D12), 상부 요추(L1, 2), 하부 요추(L3-5) 및 천골로 나누어 총 105개 구역을 서로 비교하였다. 총 105개 구역 중 46개 구역에서 bone scan이나 MRI에서 양성으로 나왔는데 bone scan에서는 30개 구역(65.2%), MRI에서는 44개 구역(95.7%)에서 양성으로 나와 MRI 민감도가 bone scan 보다 높았다. 비교한 105개 구역 중 87개 구역(82.9%)에서 서로 일치하는 결과를 보인 반면 18개 구역(17.1%)에서 두 검사 결과가 서로 일치하지 않았는데 2개 구역에서는 bone scan에서 양성이나 MRI 검사에는 정상인 경우이고 16개 구역에서는 MRI 검사 결과 양성치나 bone scan에서 음성인 경우였다. 일치하지 않는 구역은 경추 구역이 가장 많았으며 진단별로 보면 위암의 경우에 가장 많았다. 한편 bone scan에서 12명의 환자에서 척추 이외의 다른 골격계에 전이 소견을 보였으며 2명의 환자 3개 구역이 양성으로 나왔으나 이 부위가 MRI 검사에 포함되지 않아 비교에서 제외되었다. 악성 종양의 척추전이를 진단하는데 MRI가 bone scan보다 민감하였지만 bone scan은 전골격계에 대하여 손쉽게 전이 여부를 평가할 수 있으므로 일차적 선별 검사로 매우 유용하다. 그리고 bone scan의 결과와 임상 소견이 일치하지 않을 때 MRI를 선택적으로 시행하면 진단의 정확성을 더욱 높일 수 있다.

• Imaging Science in Dentistry
• /
• 제53권1호
• /
• pp.21-26
• /
• 2023

Purpose: A fully digital approach to oral prosthodontic rehabilitation requires the possibility of combining (i.e., registering) digital documentation from different sources. This becomes more complex in an edentulous jaw, as fixed dental markers to perform reliable registration are lacking. This validation study aimed to evaluate the reproducibility of 1) intraoral scanning and 2) soft tissue-based registration of an intraoral scan with a cone-beam computed tomography (CBCT) scan for a fully edentulous upper jaw. Materials and Methods: Two observers independently performed intraoral scans of the upper jaw in 14 fully edentulous patients. The palatal vault of both surface models was aligned, and the inter-observer variability was assessed by calculating the mean inter-surface distance at the level of the alveolar crest. Additionally, a CBCT scan of all patients was obtained and a soft tissue surface model was generated using patient-specific gray values. This CBCT soft tissue model was registered with the intraoral scans of both observers, and the intraclass correlation coefficient(ICC) was calculated to evaluate the reproducibility of the registration method. Results: The mean inter-observer deviation when performing an intraoral scan of the fully edentulous upper jaw was 0.10±0.09 mm. The inter-observer agreement for the soft tissue-based registration method was excellent(ICC=0.94; 95% confidence interval, 0.81-0.98). Conclusion: Even when teeth are lacking, intraoral scanning of the jaw and soft tissue-based registration of an intraoral scan with a CBCT scan can be performed with a high degree of precision.

• 한국의류산업학회지
• /
• 제12권3호
• /
• pp.354-363
• /
• 2010

The purpose of this study was to provide some preliminary results on application of 3D scan data of head shapes to the hat design and pattern-making. This paper defined necessary measurement items and concepts in 3-dimensional images of head shapes. And also it presented the methodology to pattern-making of 6-piece crown hat based on 3D data. It used the data of Size Korea to pick up and choose a head shape model with the average head size of Korean women in their twenties. Main results were: 1. The 3D scan data of head shape was better than the 1 dimensional measurement data. Because I could establish a hat pattern-making theory by the 3D scan data of head. 2. The 3D scan data provided the basis for conceptualization of basic measurement points and items for a better fit of hats as well as the definition of the basic hat circumference. 3. This presented a methodology for analyzing out head shape by 3D scan data, and allowed the derivation of the basic hat circumference from the maximum head circumference. 4. As the 6-piece Crown cloche hat made by this method fitted the head shape model perfectly, this methodology could suggest potential applicability to various hat design.

• 한국컴퓨터그래픽스학회논문지
• /
• 제29권3호
• /
• pp.59-67
• /
• 2023

본 논문은 몸체 3D 스캔과 모션 캡처 장비를 활용한 3D 애니메이션 형태의 바디 프로필을 제안한다. 사용자는 미리 정해진 몇 개의 포즈에 대하여 3D 스캔을 수행함으로써 애니메이션 형태를 가진 자신만의 바디 프로필을 제작할 수 있다. 이를 위하여 일련의 포즈를 수행하는 템플릿 애니메이션을 모션 캡처를 통하여 획득하였고, 사용자로부터 획득된 3D 스캔 데이터를 애니메이션의 각 정점 포즈에 포즈 공간 디포머(Pose-space deformer)를 통하여 매핑시켰다. 이를 통하여 만들어진 3D 애니메이션 형태의 바디 프로필은 기존의 정적인 2D 이미지나 3D 스캔데이터보다 사용자에게 더 큰 만족도를 줄 수 있음을 확인할 수 있다.

• 한국의류산업학회지
• /
• 제24권4호
• /
• pp.451-459
• /
• 2022

This study aimed to develop a a custom-made dress form for draping using a live model's 3D body scan obtained from an entry-level 3D handheld scanners, 3D modeling software and 3D printing technology. A female subject was recruited whose body size fell under the normal (N) body shape criteria suggested by KS K 0051. First, the handheld scanner reduced the length of the legs in scanning, but most of the scanning operations between the neck and crotch levels were conducted accurately. Therefore, this study was designed to develop a torso dress form. The full body 3D scan was edited into a torso shape using ZBrush® software. Using Rhinoceros^® and Materialise's Magics software, a 3D body scan was modeled so that the user could fit two types of mannequin stands (one with a neck fixation from above and one with an insert from below) to the dress form. The body scan was divided into 9 pieces to fit the printable size of the Stratasys 3D printer Fortus 250mc, and the cross-sectional distance from the center to the periphery was downsized by 2 mm. After outputting the dress form scan file with a 3D printer, the dress form was manufactured by the first covering it with a 4 oz nonwoven pad and the second covering with a single jersey material.

• 한국의류산업학회지
• /
• 제22권5호
• /
• pp.650-659
• /
• 2020

The present study provides reference data required for the design of clothing for the elderly by analyzing the body surface area during fitness motion based on 3D scan data of Korean elderly women. This study was conducted with the procedures of (1) survey of motions and main muscles for fitness, (2) acquisition of 3D scan data, and (3) analysis of rate of change for body surface area during fitness motion. Acquisition of 3D body scan data was obtained from seven elderly females (age: 64-77). We selected 66 anatomical landmarks (40 upper body and 22 lower body) by referring to previous studies. Body surface was segmented by connecting the landmarks marked on the 3D scan data acquired. Analysis of body surface area was conducted in terms of the change rate of surface area in 9 postures of elbow 0°, 90° and 180° for flexion, shoulder 90°, 180° for flexion, shoulder 0°, 180° for abduction, hip 90° for flexion, and knee 90° for flexion compared to the those in the standing posture. The amount of changes in body surface area were 12%-62% in the upper body, 15%-77% in the arm, and 10%-51% in the lower body. A future study on the rate of change of body surface length is needed; in addition, a study on how to apply the results of body surface area and body surface length analysis to clothing pattern design is also necessary.

• 한국의류산업학회지
• /
• 제10권5호
• /
• pp.652-659
• /
• 2008

This study was designed to testify the possibility and devise the method to manipulate the 3D body scan data to produce rounded-belt pattern adaptable to hip-type variation of women in their 20's. The results of this research were as follows : Firstly, based on drop-value distribution of hip and waist girth, 151 subjects were classified into three hip-types; Type 1 (15.23%) was 'cylinder type', showing lowest drop-value, Type 2 (69.54%) was 'average type' and Type3 (15.23%) was 'hourglass type' showing highest drop-value. Secondly, using CAD program, design lines for round shape belt were set on the surface of 3D scan data of representative subject of each type. And divided 3D surfaces were flattened onto the plane by the internal tools of CAD program. The measure, 'lifting value of round belt pattern', implying the level of curve ratio of pattern was higher in back than front. This result might be linked to the fact that the hip part is more protruded than the abdomen part. And the measures also showed highest values in Type 3(hourglass type) and lowest in Type 1(cylinder type), meaning that the pattern of Type 3 showed more rounded shape than that of Type 1. This finding implied that round belt for body type having high drop-value should be shaped more curved. Thirdly, difference ratios of outline length and area between 3D curves(body surface) and 2D plane(pattern) were 4.5% and 1.3%, respectively. This result demonstrated and solidified the feasibility of designing digital garment pattern from 3D body scan data.

• 대한핵의학회:학술대회논문집
• /
• 대한핵의학회 1966년도 제5회 학술대회
• /
• pp.96.2-96.2
• /
• 1966

• 대한소아치과학회지
• /
• 제33권3호
• /
• pp.429-437
• /
• 2006

치과치료에서의 심미성 회복에 대한 환자들의 요구는 점차 커지는 추세이며 이러한 치아의 심미적 치과치료에 대한 요구는 영구치에 국한된 것이 아니라 최근에는 유치에서의 심미치료도 중요하게 여겨지고 있다. 치아의 심미성을 결정하는 많은 요소들 중에서 색상과 관련해서는 치과재료의 발달과 함께 많은 변화가 있는 분야이다. 본 연구는 상악 유절치의 색조특성을 분석하고자 digital shade analysis system의 일종인 $ShadeScan^{TM}$ system(Cynovad, Canada)을 이용하여 건강한 상악 유절치의 색조를 분석하였다. 1. 치경부에서는 D2와 D3가 많이 분포되어 있었으며 모든 치아에서 D2가 가장 높은 빈도수를 보였다. 2. 중앙부에서는 C1, D2, B1이 대부분을 차지하였으며 상악 좌측 유측절치를 제외한 나머지 치아에서 C1이 가장 높은 빈도를 보였고 상악 좌측 유측절치는 D2가 가장 높은 빈도를 보였다. 3. 절단부에서는 A2가 대부분을 차지하였으며 다음으로 D2가 많았다. 모든 치아에서 A2가 가장 높은 빈도를 보였으며 다른 부위에 비하여 색조가 A2에 편중되는 경향을 보였다.

• 한국의류산업학회지
• /
• 제22권5호
• /
• pp.595-606
• /
• 2020

This study develops an optimal two-dimensional (2D) pattern from three-dimensional human scan data by considering the cycling posture and dermatome of high school male cyclists. By analyzing the body surface change in the cycling posture and considering the dermatome of the lower limbs, the optimal cutting line setting and the development of cycling tights for individual cyclists were presented to provide data that could be used in the clothing industry. We designed three cycling tights to solve the size unsuitability. 3D design 1 is a non-extension design based on the analysis of the 3D human body scan data, in which parts were connected diagonally from the front of the knee to the back of the knee. 3D design 2 removed both the front and back to reduce air resistance during cycling. 3D design 3 did not have a cutting line on the front panel because of the air resistance during cycling in the front area. We analyzed the garment pressure for 8 points of lower body and performed a subjective evaluation of the 3D designed tights and the current cycling tights. The 3D design 1 in this study was well received in the omphalion, thigh, and hip area, while 3D design 3 was well received in the omphalion, thigh, hip, and bottom bands. Therefore, the LoNE of 3D design 1 was applied to the front, and the hip cutting line of 3D design 3 was applied to the back.