• Bulletin of the Korean Chemical Society
• /
• 제26권1호
• /
• pp.151-156
• /
• 2005

The conformational dynamics of heme pocket, a small vacant site near the binding site of heme proteins -myoglobin (Mb) and hemoglobin (Hb), was investigated after photolysis of carbon monoxide from MbCO and HbCO in D$_2$O solution at 283 K by probing time-resolved vibrational spectra of photolyzed CO. Two absorption bands, arising from CO in the heme pocket, evolve nonexponentially in time. The band at higher energy side blue shifts and broadens with time and the one at lower energy side narrows significantly with a negligible shift. These spectral evolutions are induced by protein conformational changes following photolysis that modify structure and electric field of heme pocket, and ligand dynamics in it. The conformational changes affecting the spectrum of photolyzed CO in heme pocket likely modulates ligand-binding activity.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.792-794
• /
• 2000

This paper describes the design and the analysis of electromagnetic system of Magnetic Switch using 2D parametric finite element method(EM-Pulse). Magnetic Switch is electrical equipment, which is widely used for switching on/off motors in industrial field. The transient state is simulated in order to calculate the response time of Magnetic Switch. The simulation is based upon a step-by-step integration of the electric circuit equations and the core movement. The contactor uses a permanent magnet for maintaining the closed state. The presented solution takes account of non-linear magnetic material property and spring force controlled by core position. The dynamic response of Magnetic Switch predicted by the simulation agrees closely with the required condition.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1156-1158
• /
• 2005

This paper deals with the prediction of characteristic for permanent magnet linear synchronous motor(PMLSM). The open-circuit field distribution is predicted using a two-dimensional(2-D) analytical solution derivd in terms of magnetic vector potential. The slotting and skew effect is considered using the relative permeance function. and than using this result, flux linkage and back EMF is calculated. The results are validated extensively by finite element(FE) analyses and measurement.

• 한국항만학회지
• /
• 제10권1호
• /
• pp.53-61
• /
• 1996

This paper describes the effect of wave control using submerged flat plate by the numerical calculation and the hydraulic model test. The boundary element method is used to develop a numerical solution for the flow field caused by monochromatic oblique waves incident upon an infinitely long, sumerged flat plate situated in arbitrary water depth. The effect of wave blocking is examined according to the change of length, submerged depth of flat plate and incident angles. Numerical results show that longer length, shallower submergence of flat plate and larger incident angles enhance the effect of wave blocking. To validate numerical analysis method, hydraulic model test was conducted in 2-D wave flume with 60 cm metal sheet. Reflected waves are extracted from water surface elevation in front of the location of a submerged plate by least square method with 3 wave gages. From comparing experimental results with numerical results, efficiency of numerical analysis method by this study could be confirmed well within wide ranges of wave frequencies.

• Structural Engineering and Mechanics
• /
• 제61권5호
• /
• pp.563-576
• /
• 2017

This paper is a continuation of the investigations started in the paper by Akbarov, S.D., Guliyev, H.H and Yahnioglu, N. (2016) "Natural vibration of the three-layered solid sphere with middle layer made of FGM: three-dimensional approach", Structural Engineering and Mechanics, 57(2), 239-263, to the case where the three-layered sphere is a hollow one. Three-dimensional exact field equations of elastodynamics are employed for investigation and the discrete-analytical method is employed for solution of the corresponding eigenvalue problem. The FGM is modelled as inhomogeneous for which the modulus of elasticity, Poison's ratio and density vary continuously through the inward radial direction according to power law distribution. Numerical results on the natural frequencies are presented and discussed. These results are also compared with the corresponding ones obtained in the previous paper by the authors. In particular, it is established that for certain harmonics and for roots of certain order, the values of the natural frequency obtained for the hollow sphere can be greater (or less) than those obtained for the solid sphere.

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제13권2호
• /
• pp.27-36
• /
• 2007

Recently, hospital patients experience anxiety, confusion, and stress about wayfinding as the spacial layout and treatment circulatory system of hospitals have become complicated due to their oversized and complex structure. As part of finding a solution to the problem, this study seeks to examine what are the essential elements of the wayfinding planning of O.P.D. in general hospitals, to develop the model of wayfinding, and to suggest the methods of improving the wayfinding system. The research methods of this study adopted were literature review in wayfinding cognition, plan analysis of ten general hospitals, space analysis of these hospitals through space syntax, analysis of the system of visual-perceptual information through a field study, and analysis of surveys and follow-up surveys conducted to support the results. Based on these results, the proposals for finding decision points, providing the information, and developing a model planning are listed as follows. 1) The comprehensive understanding of O.P.D. spacial layout and the visual-perceptual information system is necessary to find the essential elements of wayfinding. 2) The decision points are found through the full understanding of spacial functions, circulation systems, and facility configuration, considering the spacial layout, the bound of the visual-perceptual information system, and the circulatory system. Furthermore, the information decision points could be confined by space syntax. 3) The checklist and color compound & color codes, developed through the planning of signage system and color system could be applied to the methods of providing the information. 4) The planning of wayfinding system according to the whole process of practices for outpatients was mentioned above. The system of visual-perceptual information developed through the process of this study should be integrated in the spacial layout of the whole O.P.D.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2012년도 추계총회 및 학술대회 논문집
• /
• pp.16-16
• /
• 2012

Mg and its alloys have been of great interest because of their low density of 1.7, 30% lighter than Al, but their wide applications have been limited because of their poor resistances against corrosion and/or abrasion. Corrosion resistance of Mg alloys can be improved by formation of anodic films using anodic oxidation method in aqueous electrolytes. Plasma electrolytic oxidation (PEO) is one of anodic oxidation methods by which hard anodic films can be formed as a result of micro-arc generation under high electric field. PEO method utilize not only substrate elements but also chemical components in electrolytes to form anodic films on Mg alloys. PEO films formed on AM50 magnesium alloy in an acidic fluozirconate electrolyte were observed to consist of mainly $ZrO_2$ and $MgF_2$. Liu et al reported that PEO coating on AM30 Mg alloy consists of $MgF_2$-rich outer porous layer and an MgO-rich dense inner layer. PEO films prepared on ACM522 Mg die-casting alloy in an aqueous phosphate solution were also reported to be composed of monoclinic $Mg_3(PO_4)_2$. $CeO_2$-incorporated PEO coatings were also reported to be formed on AZ31 Mg alloys in $CeO_2$ particle-containing $Na_2SiO_3$-based electrolytes. Magnesium tin hydroxide ($MgSn(OH)_6$) was also produced on AZ91D alloy by PEO process in stannate-containing electrolyte. Effects of $OH^-$, $F^-$, $PO{_4}^{3-}$ and $SiO{_3}^{2-}$ ions and alloying elements of Al and Sn on the formation of PEO films on pure Mg and Mg alloys and their protective properties against corrosion have been investigated in this work. $PO{_4}^{3-}$, $F^-$ and $SiO{_3}^{2-}$ ions were observed to contribute to the formation of PEO films but $OH^-$ ions were found to break down the surface films under high electric field. The effect of pulse current on the formation of PEO films will be also reported.

• 한국주거학회논문집
• /
• 제24권2호
• /
• pp.45-52
• /
• 2013

The Purpose of this study is to improve construction quality with area calculation methods from BIM design technology. BIM has been supporting public-private-organizations and academic circles as a solution technology to manage and produce informations effectively from construction field including facility manage one. BIM standards are necessary but not sufficient for achieving perfect practical application in South Korea. In particular, development of architectural rule based area calculation methods is very urgent and important to improve construction quality. To solve those problems, methods and standards on area calculation are developed and its effectiveness of the proposed BIM-based methods is defined through the analysis between the existed area calculation method and process which are 2D based. This study will not only improve economic efficiency and accuracy of the construction quality but also settle the BIM environment in the domestic architecture.

• 전기화학회지
• /
• 제2권2호
• /
• pp.98-105
• /
• 1999

본 연구에서는 전기장에 의하여 유발되는 자연대류의 영향을 줄이기 위하여 수평 다공성 유체층에 열적 성충화를 유지하여 부력과 유체층의 안정화 효과를 체계적으로 조사하였다. 이를 위하여 수평 다공성 유체층에서 이중확산대류에 의한 물질전달 상관식을 이론적으로 유도하고, 전기화학 실험을 통하여 이론에 의한 모델을 보완하였다. 물질전달 상관식은 다공성 매질층에 대한 유동 방정식으로 Forchheimer모델을 사용하고 미세 난류 모델을 적용하여, 용질 및 열 Darcy-Rayleigh수와 Lewis 수로 유도하였다. 실험에서는 다공성매질에 포화된 황산구리황산용액내의 구리이온을 전기 화학적 방법을 통하여 확산 또는 자연대류에 의한 물질전달 실험을 수행하였다. 이론 및 실험적 해석 결과를 종합하면 다공성 매질 내에서 구리이온의 이중확산대류에 의한 물질전달 상관식은 다음과 같다. $$Sh=\frac{0.03054(Rs_D-LeRa_D)^{1/2}}{1-3.8788(Rs_D-LeRa_D)^{-1/10}}$$ 본 연구의 결과는 실험치와 잘 부합되었으며, 모델식의 원형은 열 및 물질전달계에서 자연대류의 영향을 효과적으로 제어할 수 있는 방안으로 활용될 수 있을 것이다.

• 대한토목학회논문집
• /
• 제26권4B호
• /
• pp.335-344
• /
• 2006

본 연구에서는 Taylor의 이론, 즉 종방향 이송과 횡방향 확산이 서로 독립적으로 일어나며 두 과정이 서로 균형을 이룬다는 개념을 바탕으로 순차혼합모형을 제안하였다. 서로 다른 혼합시간과 유속 분포 등을 사용하여 수치모의를 실시하였으며, 여기서 얻어진 단면평균 농도분포를 1차원 종분산모형과 2차원 이송-분산 모형과 비교하였다. 그 결과, 순차혼합모형이 1차원 종분산모형으로 요약되는 Taylor의 이론을 잘 구현하고 있음을 알 수 있었다. 2차원이송-확산모형과의 비교를 통해 혼합 시간과 횡확산계수와의 관계를 밝힐 수 있었으며, 따라서 순차혼합모형이 1차원 종분산모형뿐 아니라 2차원 이송-분산모형까지 연계하여 전단류 분산을 통합적으로 설명하는 모형임을 알 수 있었다. 본 연구에서는 순차혼합모형의 수치모의 결과와 1차원 종분산모형과의 적합을 통해 종분산계수를 결정하고, 회귀식을 사용해 종분산계수 추정식을 제안하였다. 본 연구에서 제안한 종분산계수 추정식은 38개의 현장실험자료를 사용하여 검증하였다. 그 결과, 하폭 대 수심 비가 비교적 작은 하천에 대해서 높은 신뢰성을 나타내었으며, 대체적으로 기존의 경험식과 비슷한 신뢰도를 나타내었다.