• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.2
• /
• pp.84-91
• /
• 2009

This paper presents an online partial 3D modeling methodology that uses a mobile augmented reality system and aerial photographs, and a tracking methodology that compares the 3D model with a video image. Instead of relying on models which are created in advance, the system generates a 3D model for a real building on the fly by combining frontal and aerial views. A user's initial pose is estimated using an aerial photograph, which is retrieved from a database according to the user's GPS coordinates, and an inertial sensor which measures pitch. We detect edges of the rooftop based on Graph cut, and find edges and a corner of the bottom by minimizing the proposed cost function. To track the user's position and orientation in real-time, feature-based tracking is carried out based on salient points on the edges and the sides of a building the user is keeping in view. We implemented camera pose estimators using both a least squares estimator and an unscented Kalman filter (UKF). We evaluated the speed and accuracy of both approaches, and we demonstrated the usefulness of our computations as important building blocks for an Anywhere Augmentation scenario.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.130-144
• /
• 2023

Recently, various positioning technologies are being researched based on signal-based positioning and image-based positioning to obtain accurate indoor location information. Among these, various studies are being conducted on image positioning technology that determines the location of a mobile terminal using images acquired through cameras and sensor data collected as needed. For video-based positioning, a method of determining indoor location is used by matching mobile terminal photos with virtual landmark images, and for this purpose, it is necessary to build indoor spatial information about various landmarks such as billboards, vending machines, and ATM machines. In order to construct indoor spatial information on various landmarks, a panoramic image in the form of a road view and accurate 3D survey results were obtained through c 13 buildings of the Electronics and Telecommunications Research Institute(ETRI). When comparing the 3D total station final result and the terrestrial lidar panoramic image coordinates, the coordinates and distance performance were obtained within about 0.10m, confirming that accurate landmark construction for use in indoor positioning was possible. By utilizing these terrestrial lidar achievements to perform 3D landmark modeling necessary for image positioning, it was possible to more quickly model landmark information that could not be constructed only through 3D modeling using existing as-built drawings.

• Journal of Broadcast Engineering
• /
• v.22 no.3
• /
• pp.295-312
• /
• 2017

Digital video content is the most information-intensive and high-value content. Therefore, it is necessary to protect the intellectual property rights of these contents, and this paper also proposes a watermarking method of digital image for this purpose. The proposed method uses the frequency characteristics of 2-Dimensional Discrete Wavelet Transform (2D-DWT) for digital images and digital watermark on global data without using local or specific data of the image for watermark embedding. The method to insert digital watermark data uses a simple Quantization Index Modulation (QIM) and a multiple watermarking method that inserts the same watermark data in multiple. When extracting a watermark, multiple watermarks are extracted and the final watermark data is determined by a simple statistical method. This method is an empirical method for experimentally determining the parameters in the watermark embedding process. The proposed method performs experiments on various images against various attacks and shows the superiority of the proposed method by comparing the performance with the representative existing methods.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.7C
• /
• pp.706-715
• /
• 2005

In this paper, we present a transcoding algorithm for converting an MPEG-2 video bitstream to an H.264 bitstream. The proposed transcoder consists of two parts. One is MPEG2 decoding part and the other is H.264 encoding part Because our algorithm is for transcoding in the spatial domain, MPEG2 decoding part carries out full decoding of MPEG2 bitstream. While, because macroblock type and coded block pattern in MPEG2 are significantly related to macroblock mode in H.264, macroblock mode is selected adaptively according to macroblock type and coded block pattern in H.264 decoding part. Furthermore, motion vector is also used as side-information for 16$\ctimes$16 macroblock mode. Simulation results show that the proposed transcoder yields high reduction of total transcoding time at comparable PSNR.

• Cartoon and Animation Studies
• /
• s.49
• /
• pp.53-85
• /
• 2017

This study deals with the production system of the superhero animation that are based on DC comic books and are produced by Warner Brothers company, and tries to find out ways in order to vitalize the new window of the animation market. 28 superhero animations released from 2007 until 2017 are analyzed. Several critical points are drawn out and can be applied to the Korean animation industry. There are two categories, one is about the management of the production system, and the other is about the subcontract system. In managing the production system, there are three points: First, there are several people who play the role of either a producer or a director many times. Second, producers used to work as a group. Third, some people work not only as a producer but also as a director. In carrying out outsourcing contracts, there are six points: First, only Korean and Japanese companies participate as subcontract companies. Second, about two companies used to take part in the subcontract production in a year. Third, in case of number of people involved in production, there are more Japanese than Korean. Fourth, Japanese companies deal with some parts of the pre-production as well as the main production in . Fifth, a Japanese company has a sub-subcontract with a Korean company in one episode of . Sixth, Korean companies mostly focus on the production part of key animation. Important points that the Korean production system has to consider are also suggested under the two categories. In the production system management, there are two points. It is needed to make use of the group producer system, and it is critical to develop the story line of universe type such as DC Universe. In case of the outsourcing production system, it is essential to keep up educating 2D type of animation and, at the same time, to participate actively in the global outsourcing production. By considering these crucial points, it is expected to keep producing animation that can be used for the media window such as IPTV.

• Journal of Korean society of Dental Hygiene
• /
• v.3 no.1
• /
• pp.73-87
• /
• 2003

This study was performed on 17 female dental hygienists to find an appropriate method to reduce the hygienists' body discomfort while scaling, and provide a foundation to educate them how 10 posture during the process. To assess the arm abduction, elbow flexion, neck flexion, trunk flexion and trunk lateral bending through Video 2D(two dimensional motion) analysis and assessing the risk through the Action level of RULA(rapid upper limb assessment) checklist, an ergonomic analysis method. Correlation analyses on the posture angles and on body discomfort were performed. ANOVA analysis on scaling treatment position and the scaling treatment region of patients was also performed. The results are as following. 1. 20 analysis while scaling, arm abduction was $40{\sim}79.9^{\circ}$, elbow flexion $20{\sim}110^{\circ}$, neck flexion $50{\sim}100^{\circ}$, trunk flexion $60{\sim}80^{\circ}$, and trunk lateral bending $5{\sim}19.9^{\circ}$. 2. The Action level of RULA was 2. 3 resulted from scores 4 and 5 of group A which includes upper arm, lower ann, wrist, and scores 2 and 4 of group B which includes neck, trunk, legs. It means that the scaling treatment posture causes a high incidence rate of musculoskeletal that an additional investigation and improvement should be followed without hesitation. 3. There were significant differences among the maxilla right, maxilla anterior, maxilla left, mandible left, mandible anterior, and mandible right of a patient of the right and left upper arm, lower arm, neck, trunk, group A, group B, final RULA score while scaling treatment. 4. There were significant differences among the time position of 8, 9, 10, 11, 12, 13 of the right and left upper arm, lower arm, neck, trunk, group A, group B, final RULA score while scaling treatment, 5. As for the body discomfort, neck, right shoulder, left shoulder, right back, right wrist etc. were listed on top. As a conclusion, performing the time position of 12 which shows low right and left final RULA scores is better than the time position of 8 and 10 which show high final RULA scores to reduce the body discomfort while scaling treatment.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.3
• /
• pp.60-68
• /
• 2009

This work proposes a 10b 200MS/s 65nm CMOS ADC for high-definition video systems such as HDTV requiring high resolution and fast operating speed simultaneously. The proposed ADC employs a four-step pipeline architecture to minimize power consumption and chip area. The input SHA based on four capacitors reduces the output signal range from $1.4V_{p-p}$ to $1.0V_{p-p}$ considering high input signal levels at a low supply voltage of 1.2V. The proposed three-stage amplifiers in the input SHA and MDAC1 overcome the low output resistance problem as commonly observed in a 65nm CMOS process. The proposed multipath frequency-compensation technique enables the conventional RNMC based three-stage amplifiers to achieve a stable operation at a high sampling rate of 200MS/s. The conventional switched-bias power-reduction technique in the sub-ranging flash ADCs further reduces power consumption while the reference generator integrated on chip with optional off-chip reference voltages allows versatile system a locations. The prototype ADC in a 65nm CMOS technology demonstrates a measured DNL and INL within 0.19LSB and 0.61LSB, respectively. The ADC shows a maximum SNDR of 54.BdB and 52.4dB and a maximum SFDR of 72.9dB and 64.8dB at 150MS/S and 200MS/s, respectively. The proposed ADC occupies an active die area of $0.76mm^2$ and consumes 75.6mW at a 1.2V supply voltage.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.1
• /
• pp.11-18
• /
• 2014

The purposes of this study were to analyze the kinematics and electromyographic variables of the upper extremity for the backhand clear motion according to the type of hitting in badminton. Seven elite male university players were selected as the subjects. Four digital video cameras and Noraxon Telemyo 2400 were used to collect the 3D kinematics and electromyographic data. The results were as follows: 1) in the phase of impact, the time of motion for the overhead backhand clear was the longest, 2) in the event of impact, the distance of step toward X direction was the longest and the distance of step toward Y direction was the shortest for the overhead backhand clear, 3) in the event of backswing, the rotation angles of shoulder and pelvis and the flexion angle of shoulder for the overhead backhand clear were the biggest, 4) the maximum flexion angular velocity of shoulder and the maximum extension angular velocity of elbow for the overhead backhand clear were the biggest, and 5) in the phase of impact, mean EMG of the wrist flexor, triceps, and trapezius muscle for the overhead backhand clear was bigger than that for the underhand stroke and in the phase of follow-through, mean EMG of the wrist flexor and extensor, biceps, triceps, and trapezius muscle for the overhead backhand clear was the biggest.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2007.02a
• /
• pp.9-12
• /
• 2007

다시점 동영상 부호화기는 서로 다른 카메라에 의해 영상을 획득하므로 카메라 내부 파라미터의 차이나 조명의 차이 및 변화 등에 의한 시점 간 명도 성분의 불균형을 가지고 있다. 이로 인해 잘못된 변이 추정이 이루어질 수 있으며, 따라서 전체적인 다시점 동영상 부호화의 성능을 크게 저하시킬 수 있다. 본 논문에서는 레지듀얼이 가지고 있는 밝기 차 정보를 이용하여 시점 간의 불균형을 해소하는 가중치 예측 알고리듬을 제안한다. 주변의 인과적인 블록의 레지듀얼 정보를 이용하여 현재 블록과 참조 블록의 밝기 차를 예측하고, 이 값을 이용해 시점 간 불균형을 보정 한 후 변이 추정을 수행한다. 변이 보상 후 계산된 현재 블록의 레지듀얼 평균값을 앞에서 예측된 밝기 차의 값에 누적하여 다음 블록의 밝기 차 예측에 사용한다. 제안된 방법을 실험 영상에 적용한 결과 평균적으로 약 0.2dB의 이득을 얻었다.

• Korean Parent-Child Health Journal
• /
• v.7 no.2
• /
• pp.121-132
• /
• 2004

Purpose: This study aimed to develop a breast feeding program for mothers of premature infants. The program was applied and its effect was evaluated on stress, knowledge and breastfeeding behaviors of premature infant mothers. Method: This study employed a one group pre- and post-test quasi-experimental design. The data were collected from 17 participants from August 15 to October 24, 2004, at a N1CU at D University Medical Center located in Susan, Korea. Data were analyzed by means of frequency, SD, and t-test using SPSS version 10. Result: After the program, participants significantly showed a greater level of knowledge than before the program (t=-5.750, p=.000). No statistically significant differences in stress level scores were found (t=1.453, p=.153). The breastfeeding practice rate was 94.1%: Conclusion: This educational program using a handbook and video had a positive effect on increasing knowledge and practice of breastfeeding among premature infant mothers. It is suggested that this study be replicated with a larger sample size to compare group responses.