• 방송공학회논문지
• /
• 제14권5호
• /
• pp.638-649
• /
• 2009

최근 들어 다양한 스테레오 3D 디스플레이 장치의 출시가 활발히 이루어지면서 임의의 스테레오 3D 영상에 대한 효과적인 크기 변환 방법, 즉 스케일링(scaling) 방법에 대한 요구가 증가되고 있다. 그런데 CG 등을 통하여 생성된 경우와 같이 장면의 기하학적 정보를 완벽히 파악할 수 있는 경우를 제외하고는, 정확한 스테레오 3D 영상의 스케일링은 현실적으로 불가능하다. 이러한 제한으로 가장 널리 이용되는 방법은 좌우 영상에 대하여 적절한 2D 스케일링을 수행하고, 그 결과로 적절한 스테레오 3D 영상스케일링이 발생하기를 기대하는 것이다. 본 논문에서는 2D 영상 스케일링을 통한 스테레오 3D 영상 스케일링에 있어서, 양안시(binocular vision) 모델에 근거한 기하학적 분석과 주파수 변화 분석을 제시한다. 기하학적 분석을 통해서는 스테레오 3D 영상에서 발생 가능한 왜곡들에 대해서 설명하고, 주파수 변화 분석을 통해서는 디지털 신호의 스케일링에 필수적으로 요구되는 aliasing 왜곡 방지 방법에 대해서도 제안한다. 제안된 방법은 주관적 화질 평가 결과 샘플링 이론 (sampling theory)에만 근거한 필터링 방식에 비해 화질 왜곡을 더욱 효과적으로 억제할 수 있다는 것을 파악할 수 있었다. 따라서, 제안된 방법은 다양한 해상도를 지니는 3D 디스플레이 장치에서의 스테레오 3D 영상 재생에 효과적으로 이용될 것으로 기대된다.

• 한국음향학회지
• /
• 제31권1호
• /
• pp.11-18
• /
• 2012

본 논문은 경계가 주기적으로 변하는 주름관에 음파가 전파할 때 발생하는 차단주파수밴드 (stopband)를 이론 및 BEM으로 해석한 내용을 다루었다. 2-D 덕트를 고려하였으며 경계가 길이방향의 사인함수로 변하는 주름관에서 주름의 크기가 덕트 높이에 비해 충분히 작은 경우 다중 스케일 섭동법 (Multiple Scaling Perturbation Method)을 이용하여 해를 구하였다. 주파수가 복소수가 되는 조건에서 Bragg 공진과 Non-Bragg 공진에서 발생하는 차단주파수밴드의 형성조건을 구하였다. 2-D BEM 해석을 수행하여 주름관의 삽입손실 (Insertion Loss)을 계산하였으며 이론적으로 예측한 차단주파수밴드의 존재를 확인하였다.

• 한국치위생학회지
• /
• 제3권1호
• /
• pp.73-87
• /
• 2003

This study was performed on 17 female dental hygienists to find an appropriate method to reduce the hygienists' body discomfort while scaling, and provide a foundation to educate them how 10 posture during the process. To assess the arm abduction, elbow flexion, neck flexion, trunk flexion and trunk lateral bending through Video 2D(two dimensional motion) analysis and assessing the risk through the Action level of RULA(rapid upper limb assessment) checklist, an ergonomic analysis method. Correlation analyses on the posture angles and on body discomfort were performed. ANOVA analysis on scaling treatment position and the scaling treatment region of patients was also performed. The results are as following. 1. 20 analysis while scaling, arm abduction was $40{\sim}79.9^{\circ}$, elbow flexion $20{\sim}110^{\circ}$, neck flexion $50{\sim}100^{\circ}$, trunk flexion $60{\sim}80^{\circ}$, and trunk lateral bending $5{\sim}19.9^{\circ}$. 2. The Action level of RULA was 2. 3 resulted from scores 4 and 5 of group A which includes upper arm, lower ann, wrist, and scores 2 and 4 of group B which includes neck, trunk, legs. It means that the scaling treatment posture causes a high incidence rate of musculoskeletal that an additional investigation and improvement should be followed without hesitation. 3. There were significant differences among the maxilla right, maxilla anterior, maxilla left, mandible left, mandible anterior, and mandible right of a patient of the right and left upper arm, lower arm, neck, trunk, group A, group B, final RULA score while scaling treatment. 4. There were significant differences among the time position of 8, 9, 10, 11, 12, 13 of the right and left upper arm, lower arm, neck, trunk, group A, group B, final RULA score while scaling treatment, 5. As for the body discomfort, neck, right shoulder, left shoulder, right back, right wrist etc. were listed on top. As a conclusion, performing the time position of 12 which shows low right and left final RULA scores is better than the time position of 8 and 10 which show high final RULA scores to reduce the body discomfort while scaling treatment.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 춘계학술대회 초록집
• /
• pp.111.2-111.2
• /
• 2010

삼상슬러리 기포탑 반응기의 설계 및 Scale-up을 위하여 기포탑의 직경변화에 따른 기체-슬러리 계면에서의 물질전달 현상의 Similarity를 검토하고, 기체-슬러리 계면에서의 물질전달 현상과 슬러리 기포탑 반응기의 운전변수 및 반응물들의 물성들과의 연관성을 고찰하기 위하여 삼상슬러리 기포탑의 물질전달계(System)에서 주요 파라메타를 도출하였으며, 이들 파라메터들을 이용하여 슬러리 기포탑반응기의 물질전달 Scaling을 검토하였다. 물질전달계의 주요제어인자로는 기체-액체 부피물질전달계수($k_La$), 슬러리상의 확산도($D_{SL}$), 기포탑의 직경(D), 기포탑 반응기에 유입되는 기체의 유입속도($U_G$), 기포탑 반응기 내부의 연속상인 슬러리상의 표면장력(${\sigma}_{SL}$), 슬러리상과 기체상간의 밀도차(${\rho}_{SL}-{\rho}_G$) 그리고 슬러리상의 점도(${\mu}_{SL}$)등 슬러리 상의 물성을 선정하였으며 중력가속도(g)를 선정하였다. 물질전달계의 Scling을 검토하기위하여 이를 재구성하였으며 기포탑 반응기의 구조와 직경이 변화함에 따라 이들 무차원군의 변화양상을 고찰하였다. 실험적으로 측정된 물질전달계수와 Scaling에 의해 예측된 물질전달계수를 비교 검토함으로써 본 연구의 Correlation의 적용범위를 제시하였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제55권12호
• /
• pp.544-546
• /
• 2006

This paper proposes a new means of performance optimization for multimedia algorithm utilizing the Microscopic DVS (Dynamic Voltage Scaling). The Microscopic DVS technique controls the operating frequency and the supply voltage levels dynamically according to the processing requirement for each frame of multimedia data. The huffman decoding algorithm of MPEG-2 AAC audio decoder is optimized to maximize the power saving efficiency of Microscopic DVS technique. The experimental results show the reduction of computational complexity by more than 30% and the reduction of power consumption by more than 17% compared with those of the conventionally fast method.

• 한국연소학회지
• /
• 제17권4호
• /
• pp.30-37
• /
• 2012

The flame lengths and NOx emission characteristics of syngas $H_2$/CO turbulent non-premixed jet flames were investigated. The flame length which is the main parameter governs NOx emission was studied for various syngas compositions. The flame length was compared with previous correlation between Froude number and flame height and it shows that they have good agreements. It was confirmed that the turbulent jet flames herein investigated are in the region of buoyancy-momentum transition. NOx emission was reduced with increased Reynolds number and CO contents in syngas fuel and with decreased fuel nozzle diameter which is attributed by decreased flame residence time. Previous EINOx scaling based on flame residence time of $L_f^3/(d_f^2U_f)$ satisfies only the jet flame in momentum-dominated region, not buoyancy-momentum transition region. The simplified flame residence time ($L_f/U_f$) was adopted in modified EINOx scaling. The modified scaling satisfies the jet flames not only in momentum-dominated region but in buoyancy-momentum transition region. The scaling is also satisfied with $H_2$/CO syngas jet flames.

• The Journal of Advanced Prosthodontics
• /
• 제9권3호
• /
• pp.188-194
• /
• 2017

PURPOSE. This study was to evaluate the effect of repeated ultrasonic scaling and surface polishing with intraoral polishing kits on the surface roughness of three different restorative materials. MATERIALS AND METHODS. A total of 15 identical discs were fabricated with three different materials. The ultrasonic scaling was conducted for 20 seconds on the test surfaces. Subsequently, a multi-step polishing with recommended intraoral polishing kit was performed for 30 seconds. The 3D profiler and scanning electron microscopy were used to investigate surface integrity before scaling (pristine), after scaling, and after surface polishing for each material. Non-parametric Friedman and Wilcoxon signed rank sum tests were employed to statistically evaluate surface roughness changes of the pristine, scaled, and polished specimens. The level of significance was set at 0.05. RESULTS. Surface roughness values before scaling (pristine), after scaling, and polishing of the metal alloys were $3.02{\pm}0.34{\mu}m$, $2.44{\pm}0.72{\mu}m$, and $3.49{\pm}0.72{\mu}m$, respectively. Surface roughness of lithium disilicate increased from $2.35{\pm}1.05{\mu}m$ (pristine) to $28.54{\pm}9.64{\mu}m$ (scaling), and further increased after polishing ($56.66{\pm}9.12{\mu}m$, P<.05). The zirconia showed the most increase in roughness after scaling (from $1.65{\pm}0.42{\mu}m$ to $101.37{\pm}18.75{\mu}m$), while its surface roughness decreased after polishing ($29.57{\pm}18.86{\mu}m$, P<.05). CONCLUSION. Ultrasonic scaling significantly changed the surface integrities of lithium disilicate and zirconia. Surface polishing with multi-step intraoral kit after repeated scaling was only effective for the zirconia, while it was not for lithium disilicate.

• 한국환경과학회지
• /
• 제29권1호
• /
• pp.15-23
• /
• 2020

The determination of soil characteristics is important in the simulation of rainfall runoff using a distributed FLO-2D model in catchment analysis. Digital maps acquired using remote sensing techniques have been widely used in modern hydrology. However, the determination of a representative parameter with spatial scaling mismatch is difficult. In this investigation, the FLO-2D rainfall-runoff model is utilized in the Yongdam catchment to test sensitivity based on three different methods (mosaic, arithmetic, and predominant) that describe soil surface characteristics in real systems. The results show that the mosaic method is costly, but provides a reasonably realistic description and exhibits superior performance compared to other methods in terms of both the amount and time to peak flow.

• 수산해양기술연구
• /
• 제29권2호
• /
• pp.162-167
• /
• 1993

Wilbrink 본뜨기에서 모우드 라킹 현상과 소모적 궤적의 두 경우에 대한 일반화차원 D 하(n)을 수치 해석적으로 계산하였다. 투닝변수 z=0.03, 소모변수 b=0.9, k 하(d)=0.272313668의 값으로 주어진 소모적 Wilbrink 본뜨기에서 모우드 라킹현상의 경우에는 n～20일 때 D 하(-20) =0.924202의 값을 갖으며, 소모적궤적에서는 D 하(-20) =0.63292와 D 하(+20) =1.89877의 값으로 주어진다. 이때의 값들은 n$\longrightarrow$$\infty$감에 따라 Circle 본뜨기의 D 하($\pm$$\infty$) 값들과 근사적으로 일치한다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권1호
• /
• pp.92-97
• /
• 2008

In this Paper, we present a scaling theory for dual material surrounding gate (DMSGTs) MOSFETs, which gives a guidance for the device design and maintaining a precise subthreshold factor for given device parameters. By studying the subthreshold conducting phenomenon of DMSGTs, the effective conductive path effect (ECPE) is employed to acquire the natural length to guide the design. With ECPE, the minimum channel potential is used to monitor the subthreshold behavior. The effect of ECPE on scaling factor significantly improves the subthreshold swing compared to conventional scaling rule. This proposed model offers the basic designing guidance for dual material surrounding gate MOSFETs.