• Title/Summary/Keyword: 2D Implementation

Search Result 1,339, Processing Time 0.026 seconds

Implementation of marine static data collection and DB storage algorithms (해양 정적 데이터 수집 및 DB 저장 알고리즘 구현)

  • Seung-Hwan Choi;Gi-Jo Park;Ki-Sook Chung;Woo-Sug Jung;Kyung-Seok Kim
    • The Journal of the Institute of Internet, Broadcasting and Communication
    • /
    • v.23 no.2
    • /
    • pp.95-101
    • /
    • 2023
  • Globally, the importance of utilization and management of marine spatial information is being maximized, and analyzing such data is emerging as a major driving force for R&D. In Korea, it is expected that collecting marine data from the past to the present and extracting its value will play an important role in the development of science in Korea in the future. In particular, marine static data constitutes a huge big database, and it is necessary to store and store the collected data without loss as high data collection costs and high-level observation techniques are required. In addition, the Disaster Safety Intelligence Convergence Center's "Marine Digital Twin Establishment and Utilization-Based Technology Research" task requires collection and analysis of marine data, so this paper conducts a current status survey of static marine data. And we present a series of algorithms that collect and store them in a database.

A study on the implementation of door control unit for railway trains operable at low and high platforms

  • Young-Seok Cho
    • Journal of the Korea Society of Computer and Information
    • /
    • v.28 no.7
    • /
    • pp.1-9
    • /
    • 2023
  • Currently, as the demand for stops in the urban increases resulting from an increase in the supply of express trains, the development of trains capable of operating both high-floor platforms in the urban and low-floor platforms in the suburbs is required. In this paper, we studied the design and fabrication of a controller for train doors that consists of low and high steps as a plug-in type door mechanism and thus can be used on low and high platforms. This DCU H/W was designed and implemented using 32 bit MCU to control 4 motors, 33 digital inputs and 16 digital outputs. In addition, based on the software life cycle of EN50128, 2 items of operation requirements and 12 items of control requirements were derived, and then they were designed and implemented as operation SW. The implemented SW was tested for each requirement. As a result, we performed tests on 13 items that could be tested in the mock-up out of 14 total requirement items and showed that the requirements were satisfied.

A Fast Motion Estimation Algorithm Based on Multi-Resolution Frame Structure (다 해상도 프레임 구조에 기반한 고속 움직임 추정 기법)

  • Song, Byung-Cheol;Ra, Jong-Beom
    • Journal of the Institute of Electronics Engineers of Korea SP
    • /
    • v.37 no.5
    • /
    • pp.54-63
    • /
    • 2000
  • We present a multi-resolution block matching algorithm (BMA) for fast motion estimation At the coarsest level, a motion vector (MV) having minimum matching error is chosen via a full search, and a MV with minimum matching error is concurrently found among the MVs of the spatially adjacent blocks Here, to examine the spatial MVs accurately, we propose an efficient method for searching full resolution MV s without MV quantization even at the coarsest level The chosen two MV s are used as the initial search centers at the middle level At the middle level, the local search is performed within much smaller search area around each search center If the method used at the coarsest level is adopted here, the local searches can be done at integer-pel accuracy A MV having minimum matching error is selected within the local search areas, and then the final level search is performed around this initial search center Since the local searches are performed at integer-pel accuracy at the middle level, the local search at the finest level does not take an effect on the overall performance So we can skip the final level search without performance degradation, thereby the search speed increases Simulation results show that in comparison with full search BMA, the proposed BMA without the final level search achieves a speed-up factor over 200 with minor PSNR degradation of 02dB at most, under a normal MPEG2 coding environment Furthermore, our scheme IS also suitable for hardware implementation due to regular data-flow.

  • PDF

Autonomous Surveillance-tracking System for Workers Monitoring (작업자 모니터링을 위한 자동 감시추적 시스템)

  • Ko, Jung-Hwan;Lee, Jung-Suk;An, Young-Hwan
    • 전자공학회논문지 IE
    • /
    • v.47 no.2
    • /
    • pp.38-46
    • /
    • 2010
  • In this paper, an autonomous surveillance-tracking system for Workers monitoring basing on the stereo vision scheme is proposed. That is, analysing the characteristics of the cross-axis camera system through some experiments, a optimized stereo vision system is constructed and using this system an intelligent worker surveillance-tracking system is implemented, in which a target worker moving through the environments can be detected and tracked, and its resultant stereo location coordinates and moving trajectory in the world space also can be extracted. From some experiments on moving target surveillance-tracking, it is analyzed that the target's center location after being tracked is kept to be very low error ratio of 1.82%, 1.11% on average in the horizontal and vertical directions, respectively. And, the error ratio between the calculation and measurement values of the 3D location coordinates of the target person is found to be very low value of 2.5% for the test scenario on average. Accordingly, in this paper, a possibility of practical implementation of the intelligent stereo surveillance system for real-time tracking of a target worker moving through the environments and robust detection of the target's 3D location coordinates and moving trajectory in the real world is finally suggested.

Design and Implementation of Compact Ultra Wideband Patch Antenna Using L-Feed and Slot-Feed (L 급전 및 Slot 급전을 동시에 적용하는 광대역 소형 패치 안테나의 설계 및 구현)

  • Choi, Jong-In;Lee, Bomson
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.24 no.5
    • /
    • pp.484-491
    • /
    • 2013
  • In this paper, the method of designing a wideband antenna has been introduced through the design technique that simultaneously employs L- and slot-type feeds. Using the two kinds of feeds and additional fence structure, a compact wideband patch antenna has been realized. The size of the patch has been reduced by about 30 % based on the low frequency(824 MHz) and the full fractional bandwidth is wider than 100 %. The L-feed element is for the EM coupling feeding at the low frequency, while it functions as a feeding line for the power coupling through the slot at the high frequency. The proposed antenna has been designed not only for wideband operations but also for a proper array element with a reduced size. Thus, the foundation for developing the ultra wideband patch array antennas has been prepared. The fabricated antenna has been found to have good characteristics on V.S.W.R and the radiation patterns over the full bands. The experimental and computed results are shown to be in good agreement.

A Study on the Conversion for Early Free of charge on the Toll Road - In the place of Changwon Tunnel - (유료도로의 조기 무료화 전환에 관한 연구 - 창원터널을 중심으로 -)

  • Choi, Yang Won
    • KSCE Journal of Civil and Environmental Engineering Research
    • /
    • v.31 no.1D
    • /
    • pp.51-63
    • /
    • 2011
  • This study suggests that prior to construction of the 2nd Changwon tunnel and implementation of the demanded free of charge on Changwon tunnel, it is recommended to improve the traffic facilities and management of the traffic condition in order to create an efficient road that will keep traffic flow to a minimum and maintain the facilities proper working order. It has been generally accepted that the 2nd Changwon tunnel is necessary to construct and open as soon as possible. This is due to the service level of current traffic volume in the Changwon tunnel pay toll road which have been so congested that the fees have increased causing a public complaint to be filed, demanding a early free of charge be implemented for the Changwon tunnel. Furthermore, the objective and impartial analysis of the traffic situation based on a simulation of the alternative and traffic congestion fees has been provided to make the early free of charge on toll road as soon as possible. Finally, careful attention should be paid to seek to make the early free of charge on toll road in order to minimize the damages both specified and unspecified that may arise the prompt settlement of construction repayments and security of minimum management fees should be given priority over other alternatives.

SNR Estimation Based on Correlation of Decision Feedback Signal in OFDM System (OFDM 시스템에서 Decision Feedback 신호의 상관 관계를 이용하는 SNR 추정)

  • Kim, Seon-Ae;Ryu, Heung-Gyoon;Lee, Seung-Jun;Ko, Dong-Kuk
    • The Journal of Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.21 no.9
    • /
    • pp.995-1004
    • /
    • 2010
  • In the channel-varying environment, it is very important to estimate the signal to noise ratio(SNR) of received signal and to transmit the signal effectively for the modern communication system. The performance of existing non-data-aided (NDA) SNR estimation methods are substantially degraded for high level modulation scheme such as M-ary APSK or QAM. In this paper, we propose a SNR estimation method which uses zero point auto-correlation of received signal per block and auto-/cross- correlation of decision feedback signal in OFDM system. Proposed method can be studied into two Types; Type 1 can estimate SNR by zero point auto-correlation of decision feedback signal based on the second moment property. Type 2 uses both zero point auto-correlation and cross-correlation based on the fourth moment property. In block-by-block reception of OFDM system, these two SNR estimation methods can be possible for the practical implementation due to correlation based the estimation method and they show more stable estimation performance than the previous SNR estimation methods. Also, we mathematically derive the SNR estimation expression according to computational difference of auto-/cross-correlation. Finally, Monte Carlo simulations are used to verify the proposed method.

Design and Implementation of Compatible Certification System of International Standard based Industrial Software (산업용 소프트웨어 국제표준 적합성 인증 시스템의 설계 및 구현)

  • Yang, Hae-Sool;Choi, Min-Yong;Park, In-Soo
    • The KIPS Transactions:PartD
    • /
    • v.10D no.5
    • /
    • pp.793-804
    • /
    • 2003
  • In the latest, it's increasing an applied technology to be related with growth of industry circles. It's one of them a software to be used in industry circles. and It's most important part to apply an industrial equipment, so software to take charge of major part is indicative performance of quipment. At this time, it's inspired an evaluation and measurement of software quality to have within industrial equipment, and it's forming the research and development by the inside and outside of the country. For this, it's constructed a valuation metric to be based on ISO/IEC 12119, the International Standard for general the terms desired of quality of software and ISO/IEC 9126-2, the International Standard of the terms valuation of qualify for evaluation and measure, and for this accomplishment, It has been designed and developed industrial software international standard compatible approval system which approve a quality based on quality test result of industrial software using the ISO/IEC 14598-6 that international standard for organization of evaluation module.

A Study on the Level of Self-regulated Learning Ability for Students attending Tutoring Program (튜터링 프로그램에 참여한 D대학 대학생들의 자기조절 학습능력 수준에 관한 조사)

  • Jeong, Hyun-Ja;Pyo, Chang-Woo
    • Journal of the Korea Academia-Industrial cooperation Society
    • /
    • v.12 no.1
    • /
    • pp.170-180
    • /
    • 2011
  • The purposes of this study are to find out the effectiveness of the tutoring program and the level of self-regulated learning ability in tutoring program attending students. This study has been performed for team-tutoring program attending students(n=183) who are in 15 department, D college in Daegu. Following results were drawn thought correlation analyses of variables obtained during the survey period. The results were as follows; There was statistically significant difference among perception controlling ability, purpose controlling ability, and action controlling ability. In over 20 ages, organization, meta-perception stratagem, arrangement, self-effectiveness, controlling learning time ability were higher than of lower 20 ages(p<0.05). In tutors, demonstration, organization, meta-perception stratagem, arrangement, checking, purpose intentions, self- effectiveness, achievement, controlling action, help requirement ability were higher than tutees(p<0.05). As results, the tutoring program was effective for both tutors and tutees in college students. Further studies in an education program for students in all years should be implemented to examine tutoring effects. Implementation of tutoring should address the frustrations and difficulties encountered by the students to facilitate better outcomes.

Design and Implementation of Query Classification Component in Multi-Level DBMS for Location Based Service (위치기반 서비스를 위한 다중레벨 DBMS에 질의 분류 컴포넌트의 설계 및 구현)

  • Jang Seok-Kyu;Eo Sang Hun;Kim Myung-Heun;Bae Hae-Young
    • The KIPS Transactions:PartD
    • /
    • v.12D no.5 s.101
    • /
    • pp.689-698
    • /
    • 2005
  • Various systems are used to provide the location based services. But, the existing systems have some problems which have difficulties in dealing with faster services for above million people. In order to solve it, a multi-level DBMS which supports both fast data processing and large data management support should be used. The multi-level DBMS with snapshots has all the data existing in disk database and the data which are required to be processed for fast processing are managed in main memory database as snapshots. To optimize performance of this system for location based services, the query classification component which classifies the queries for efficient snapshot usage is needed. In this paper, the query classification component in multi-level DBMS for location based services is designed and implemented. The proposed component classifies queries into three types: (1) memory query, (2) disk query, (3) hybrid query, and increases the rate of snapshot usage. In addition, it applies division mechanisms which divide aspatial and spatial filter condition for partial snapshot usage. Hence, the proposed component enhances system performance by maximizing the usage of snapshot as a result of the efficient query classification.