Adjusting pressure level in the construction of athletes' tight-fitting garments by reducing the elastic knit pattern is a challenging subject, which influences the performance of the wearer directly. Therefore, in this study, relationship between the reduction rates of the basic pattern obtained from 3D human scan data and resultant clothing pressure was explored to improve the fit and pressure exerted by clothing. 3D scan data were obtained using Cyberware and they were transformed into a flat pattern using software based on Runge-Kutta method. Reduction rate was examined by subjective wear test as well as objective pressure measurement. As a result, difference in the length between the original 3D body scan data and the 2D tight-fitting pattern was 0.02$\sim$0.50cm (0.05$\sim$1.06%), which was within the range of tolerable limits in making clothes. Among the five garments, the 3T-pattern was superior in terms of subjective sensation and fit. The pressure of the 3T pattern was 2$\sim$4 gf/cm2 at five locations on the body, which is almost the same or a bit higher than that of Z-pattern. In the case of tight-fitting overall garment, the reduction rate of the pattern in the wale direction is more critical to the subjective sensation than the course direction. It is recommended that the reduction grading rules of course direction should be larger than that of Ziegert for a better fit of tight-fitting garments. In the case of wale direction, however, reduction grading rule should be kept the same as suggested earlier by Ziegert (1988).
Let $p_1$ and $p_2$ be two distinct odd primes with gcd($p_1-1$, $p_2-1$) = 6. In this paper, we compute the linear complexity of the first class two-prime Whiteman's generalized cyclotomic sequence (WGCS-I) of order d = 6. Our results show that their linear complexity is quite good. So, the sequence can be used in many domains such as cryptography and coding theory. This article enrich a method to construct several classes of cyclic codes over GF(q) with length $n=p_1p_2$ using the two-prime WGCS-I of order 6. We also obtain the lower bounds on the minimum distance of these cyclic codes.
This study aimed to develop functional underwear for elderly women in their sixties in terms of good fit, wear comfort and body temperature regulation. To satisfy elderly women's physical and metabolical needs, an automatic temperature control system via PCM treatment was applied. Underwear pattern was produced by producing body surface replica, which was derived from 3D body parametric model. Differential ratios of outline length and area between 3D surface and 2D plane were 1.4% and 0.5%, respectively. The reduction rate was determined as 10% through the expert's evaluation. PCM treated fabric showed higher Q-max, meaning that it can facilitate the thermal transition in hot situation. Moreover, it also showed higher insulation to preserve heat and keep warm microclimate in a cold weather. Heat distribution measurements on various body parts revealed that the temperature after PCM treatment was significantly higher. The clothing pressure after 10% pattern reduction showed higher before reduction, at the same time, even lower than the comfort clothing pressure range of $5{\sim}10gf/cm^2$, implying that experimental garment of this research is acceptable in terms of clothing pressure. Evaluation results on the comfort to move in various motions proved that adequate clothing pressure improved the wear comfort in various motions.
A 30-kV plasma immersion ion implantation setup (P $I^3$) has been equipped with a self-developed 6'-magnetron to perform hard coatings with enhanced adhesion by P $I^3$D(P $I^3$ assisted deposition) process. Using ICP source with immersed Ti antenna and reactive magnetron sputtering of Ti target in $N_2$/Ar ambient gas mixture, the TiN films were prepared on Si substrates at different pulse bias and ion-to-atom arrival ratio ( $J_{i}$$J_{Me}$ ). Prior to TiN film formation the nitrogen implantation was performed followed by deposition of Ti buffer layer under A $r^{+}$ irradiation. Films grown at $J_{i}$$J_{Me}$ =0.003 and $V_{pulse}$=-20kV showed columnar grain morphology and (200) preferred orientation while those prepared at $J_{i}$$J_{Me}$ =0.08 and $V_{pulse}$=-5 kV had dense and eqiaxed structure with (111) and (220) main peaks. X-ray diffraction patterns revealed some amount of $Ti_{x}$$N_{y}$ in the films. The maximum microhardness of $H_{v}$ =35 GN/ $M^2$ was at the pulse bias of -5 kV. The P $I^3$D technique was applied to enhance wear properties of commercial tools of HSS (SKH51) and WC-Co alloy (P30). The specimens were 25-kV PII nitrogen implanted to the dose 4.10$^{17}$ c $m^{-2}$ and then coated with 4-$\mu\textrm{m}$ TiN film on $Ti_{x}$$N_{y}$ buffer layer. Wear resistance was compared by measuring weight loss under sliding test (6-mm $Al_2$$O_3$ counter ball, 500-gf applied load). After 30000 cycles at 500 rpm the untreated P30 specimen lost 3.10$^{-4}$ g, and HSS specimens lost 9.10$^{-4}$ g after 40000 cycles while quite zero losses were demonstrated by TiN coated specimens.s.
This paper investigates the change of mechanical properties and thermal shrinkage in commercial multi-filament PET(polyethylene terephthalate) , namely, regular yarn, POY, DTY and composite yarn. To determine changing the effects of processing steps, these were examined at three steps process simulation conditions. The first step is sizing simulation$(S-1\;step\;:\;130^\circ{C}\times2\;min$., hot air treatment under 0.1 gf/d load), the second step is scouring simulation$(S-2\;step\;:\;100^\circ{C}\times20\;min$., boiling water treatment under free tension)and final step is setting simulation$(S-3\;step\;:\;180^\circ{C}\times2\;min$., hot air treatment under free tension). Regular yarn in multi-step treatment showed higher shrinkage at S-3 step and DTY showed higher in at S-1 step. While POY was relaxed at S-1 step, composite yarn showed different shrinkage properties depending on composite yarn type. Mechanical properties showed good relationship with shrinkage : high shrinkage makes initial modulus decrease and bleating strain increase. It also makes decreasing yield strain and yield stress decrease.
이 연구의 목적은 DNA microarray 분석법을 이용하여 건강한 사람치주인대섬유모세포, 건강한 사람치은섬유모세포, 복제노화된 사람치은섬유모세포, 염증성 사람치주인대 섬유모 세포의 유전자 발현 형태를 상호비교하고자 하였다. 환자의 동의하에 충치, 치주염이 없이 교정발치된 치아의 치주인대세포를 배양하여 건강한 치주인대섬유모세포로, 만성치주염으로 발거된 치아에서 채취하여 배양한 세포를 염증성 치주인대섬유모세포로 선정하였다. 구강에서 채취한 치은결체조직에서 배양한 사람치은섬유모세포를 일차 배양한 후 계대배양을 통해 복제 노화를 유도하였다. $-198^{\circ}C$의 액화질소에 저장되어 있던 2, 4, 8, 15, 16세대 세포를 실험에 이용하였다. 위의 모든 세포들은 60 mm 배양접시에서 세포들이 80-90%의 밀생이 될 때까지 5% $CO_2$, $37^{\circ}C$, 100% 습도의 배양기에서 2일 간격으로 10% FBS가 함유된 DMEM 세포 배양액을 교체하면서 세포를 배양하였다. Trizol Reagent (Invitrogen, USA)를 이용하여 제조회사의 지시에 따라 total RNA를 추출하였다. 18S RNA와 28S RNA를 확인한 후 DNA microarray 분석을 실시하였다. 4배수 이상의 변화양상을 비교시 상호 유전자 발현의 차이를 나타내었다. 건강한 사람치은섬유모세포(2세대)와 노화된 치은섬유모세포에서 가장 높은 발현변화를 나타낸 반면 DMC1 dosage suppressor of mck1 homolog, meiosis-specific homologous recombination,은 건강한 치은섬유모세포에서 가장 높게 나타났다. 염증성 치은인대섬유모세포와 건강한 치주인대 섬유모세포를 비교시, Regucalcin은 염증성 치주인대섬유모세포에서 가장 높게 나타났고, Vascular cell adhesion molecule 1도 두 번째로 높게 나타났다. 건강한 치주인대섬유모 세포와 건강한 치은섬유모세포를 비교시, IL-11과 periostin이 치주인대섬유모세포에서 높은 발현을 나타낸 반면, Prostaglandin D2 synthase 21kDa과 Thioredoxin interacting protein은 치은섬유모세포에서 높은 발현을 나타내었다. 염증성 치주인대섬유모세포와 노화된 치은섬유모세포(15세대 이상)를 비교시 149개의 유전자가 유사한 발현 수준을 나타내었다. 이 연구는 노화, 염증, 세포 형태에 따라서 유전자 수준에서 가장 높거나 높은 수준 변화를 보이는 유전자가 다를 수 있음을 나타낸다. 향후, 치주염 환자들에서, 노염, 염증, 세포 특이성에 관한 유전자 표시지를 이용하여 진단하거나 치료에 응용하기 위해서는 더 많은 연구가 필요하리라 사료된다.
To examine the physical properties of POY through the microstructure control, the crystal structure such as the crystallinity, the crystallite size, the orientation, the shrinkage, the tensile properties, and the thermal stress of POY(80/48, SD) were examined at different draw ratios and annealing temperatures. From the examination following conclusions were obtained : 1. The crystallinity was more effected by the heat setting temperature than by the draw ratio. The increasing rate was greatest at the heat setting temperature range of $170~190^\circ{C}$. 2. The crystallite size perpendicular to the fiber axis was more effected by the annealing temperature at lower draw ratios. On the other hand, the crystal and amorphous orientations were more effected by the heat setting at higher draw ratios. 3. The boiling shrinkage did not change significantly, but the total shrinkage showed 13% at the draw ratio 1.9 and the heat setting temperature $170^\circ{C}$. 4. The maximum thermal stress increased with increasing the draw ratio and decreasing the heat setting temperature in the temperature range of $170~210^\circ{C}$. At the draw ratio 1.9 and the heat setting temperature $170^\circ{C}$, the maximum thermal stress found was 1.1gf/d. 5. In the heat setting temperature above $170^\circ{C}$ after the drawing, the crystallinity, the crystallite size, the orientation, and the strength increased with increasing temperature, but the shrinkage and the maximum thermal stress decreased with increasing temperature.
본 연구의 목적은 생균제의 지속적인 첨가에 의한 돼지에게 있어 성장능력, 영양소 소화율, 혈중 요소태 질소량 및 면역반응에 미치는 영향을 평가하기 위해 실시하였다. 처리는 대조구, 대조구 사료에 0.1%의 생균제 첨가구(P-O.I), 대조구 사료에 0.2%의 생균제 첨가구 (P-0.2)로 하였다. 사양실험에서는 21 일령에 이유한 총 60마리 의 돼지(펑균 체중 6.17 $\pm$ 0.45 kg)를 공사하여 성별 빛 체중에 따라 난괴법에 의해서 배치하였다. 옥수수 대두박 위주의 실험사료에 전 기간에 걸쳐 항생제는 첨가하지 않고 생균제만을 처리별로 첨가하였다. 0${\sim}$8주간의 사양설험에서는 처리간 일당증체량, 일당사료섭취량 및 사료효율에서 유의한 차이가 나타나지 않았다 하지만 9${\sim}$20주에서는 P-O.I과 P-0.2 처리구가 대조구에 비해 유의하게 일당증체량이 증가하였으며 (P<0.05) 첨가수준이 증가할수록 그 경향은 더욱 뚜렷하였다. 전체 사양 실험 기간동안 일당증체량, 일당사료섭취량 및 사료효율은 생균제 첨가구가 대조구에 비해 증가하는 경향을 보였으나 통계적으로 유의한 차이는 없었다. 생균제에 의한 영양소 소화율 및 질소 축적율을 조사하기 위해 자돈기와 육성기에 두번에 결쳐 대사실험을 실시하였다. 자돈기(평균 체중 17.93 $\pm$ 1.45kg )에서는 건물, 조단백질, 조지방의 소화율이 P-O.I 과 P-0.2 생균제 처리구에서 대조구에 비해 증가하였으며 (P<0.05), 조회분의 소화율은 P-0.2 처리구가 대조구에 비해서 유의하게 증가하였다. (P<0.05). 칼슐의 소화용은 P-0.2 처리구가 P-O.I 및 대조구에 비해 유의 하게 높았지만(P<0.05), 인의 소화율에서는 처리간 차이가 나타나지 않았다. 질소 축적율에서는 P-O.2와 P-O.1 생균제 처리구가 분내 질소 함량을 유의하게 낮추었으나( P<0.05), 뇨내 질소 함량 및 질소 축적율에는 영향을 미치지 않았다. 육성기(평균체중 41.80 $\pm$2.68kg)에서는 처리간 영양소 소화율 및 질소 축적율이 통계적으로 유의한 차이를 보이지 않았다. 그리고 혈중 요소태 질소농도 및 혈액내 액혈구, IgG, IgA의 함량도 전 기간에 걸쳐 처리간의 차이가 나타나지 않았다. 본 실험을 통하여 사료내 지속적인 생균제의 첨가는 돼지의 성장과 영양소 소화율을 향상 시킬 수 있을 것으로 사료된다.
다진 마늘의 상품화를 위한 방법을 모색하기 위하여 생 마늘을 다진 마늘로 제조한 후. 구연산과 식염, 그리고 천연보존제를 각각 첨가하거나 복합 첨가하여 그 효과를 검증한 결과는 다음과 같다. 1. 본 실험에서 구연산의 첨가효과를 알아보기 위하여 구연간 농도 0.5%와 l%의 두 구간으로 설정하여 결과를 검증하였는바, citric acid 0.5%구간에서는 a값의 저하에 상당한 차이를 보였다. 또한 citric acid l%구간에서도 L값의 상승, a값의 저하, b값의 저하 등 결과적으로 갈변억제 효과에 상당히 우수한 영향을 미쳤다. 2. 식염 1%구간에서는 오히려 역효과(가스량 증가)를 보여 주었으며, 식염 농도가 2%이상에서는 미생물 증식에 있어 억제효과를 보여 주어 식염의 방부제 역할을 충분히 인식할 수 있었다. 이러한 결과로 보면 Gas의 형성량은 미생물의 증식량과도 밀접한 관계를 보여 준다고 할 수 있다. Hunter 계수값을 살펴보면 식염의 농도가 a값의 변화에는 많은 영향을 주지 않았지만, salt 3% 구간에서 b값의 현저한 제어능력을 보여 주어 결과적으로 L값의 저하효과를 가져와 갈변억제효과를 보여 주었다. 3. 구연산 0.5%와 Salt 3%의 복합첨가가 갈변억제에 상당히 큰 효과를 보여 주었음을 알 수 있다. 즉, b값의 수치에는 영향력이 거의 없으나 a값(적색도)의 저하에는 효과가 좋아 결과적으로 L값(명도)의 유지에 상당히 좋은 반응을 보여 주었다. 그리고 CA l%와 Salt 3%의 복합첨가 구간에서는 미생물수 증식억제, L값 유지(갈변 억제) 등에 좋은 결과를 보여 주었지만, pH의 수치는 상당히 낮아지는 결과를 보여 주었다. 4. 천연종실추출액(GF, 500ppm)과 구연산(0.3%)의 복합첨가효과에 있어서는 미생물생성억제효과가 좋았으며, 갈변억제효과는 보통이었다. GF(500ppm)와 구연산(0.3%), 그리고 여기에 Ascorbic acid(0.1%)를 첨가한 복합효과측정에 있어서는 갈변억제의 효과에 그다지 영향을 끼치지 않았고, 미생물생성억제효과는 약간 있었다. 첨가농도를 다르게 한 구연산과 겨자의 혼합액(CA+Mustard 0.5%)의 효과는 Sample D의 경우와 크게 다르지 않았으나. 농도의 비중에 비하여 미생물 억제기능은 오히려 약간 상승하였다. 5. 다진 마늘을 제조하여 2주 경과한 후의 색상과 맛에 대한 기호성(평균 점수로 표시)점수는 전반적으로 낮아졌으나, 대체적으로 다진 마늘의 색상과 맛에 있어 식염 3% 구간에서 가장 좋은 결과를 보여 주었다. 구연산 5%와 l% 구간의 관능검사 결과는 2주 경과 후 색상과 맛에 있어 식염첨가효과보다 더욱 좋은 평균점수로 나타났다. 식염과 구연산의 복합첨가 구간에 있어서는 구연산 0.5%와 NaCl 3%의 복합첨가 구간에서 관능검사의 색상과 맛이라는 두 가지 측면에서 가장 좋은 점수를 보여 주었다. 또한 천연종실추출액과 Citric Acid 그리고 Ascorbic acid 등의 3가지 복합첨가효과에 있어서도 비교적 좋은 점수의 관능검사 결과가 나타났다. 6. 쵸핑 사이즈(choppin size)에 따른 점도의 변화 및 포장적성을 위한 관능검사의 결과는 다진 마늘의 입자 직경이 3mm size일 때, 즉 점도(Viscosity)가 4500cp에서 가장 좋은 점수(7점)의 관능 평가를 받았다.
Objective : Caryophylli Flos has been used in Korean medicine to relieve vomiting and pains caused by chills that make fluid circulation difficult. This study was designed to investigate the protective effect of ethanol extract of Caryophylli Flos (CF) in hydrogen peroxide (H2O2)-induced apoptotic cell death in human keratinocyte HaCaT cells. Methods : CF was prepared by extracting 200 g of Caryophylli Flos in 2 L of ethanol for 48 h. Cell viability was measured by MTT assay, and the protein expression was monitored by Western blot analysis. Apoptosis was determined by terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) assay. Reactive oxygen species (ROS) was measured using fluorescent dye, and reduced glutathione (GSH) was determined with a colorimetric commercial kit. Results : CF protected HaCaT cells from cell death caused by oxidative stress after H2O2 treatment. H2O2 amplified generation of ROS and induced depletion of GSH, whereas these changes in ROS and GSH were inhibited by GF treatment. In addition, H2O2 resulted in apoptosis as assessed by TUNEL assay and the expression of apoptosis regulator proteins. However, cells treated with CF showed a decrease in TUNEL-positive cells and restored the reduced expression of procaspase-9, -3 and PARP. Conclusion : This study showed cytoprotective effects of CF by anti-apoptotic activity while exerting antioxidative activity in H2O2-treated HaCaT cells. These results suggest that CF could be beneficial in skin damage caused by oxidative stress.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.