• Asian Journal of Atmospheric Environment
• /
• v.6 no.1
• /
• pp.53-66
• /
• 2012

A comparison of analytical approaches for Levoglucosan ($C_6H_{10}O_5$, commonly formed from the pyrolysis of carbohydrates such as cellulose) and used for a molecular marker in biomass burning is made between the four different analytical systems. 1) Spectrothermography technique as the evaluation of thermograms of carbon using Elemental Carbon & Organic Carbon Analyzer, 2) mass spectrometry technique using Gas Chromatography/mass spectrometer (GC/MS), 3) Aerosol Mass Spectrometer (AMS) for the identification of the particle size distribution and chemical composition, and 4) two dimensional Gas Chromatography with Time of Flight mass spectrometry (GC${\times}$GC-TOFMS) for defining the signature of Levoglucosan in terms of chemical analytical process. First, a Spectrothermography, which is defined as the graphical representation of the carbon, can be measured as a function of temperature during the thermal separation process and spectrothermographic analysis. GC/MS can detect mass fragment ions of Levoglucosan characterized by its base peak at m/z 60, 73 in mass fragment-grams by methylation and m/z 217, 204 by trimethylsilylderivatives (TMS-derivatives). AMS can be used to analyze the base peak at m/z 60.021, 73.029 in mass fragment-grams with a multiple-peak Gaussian curve fit algorithm. In the analysis of TMS derivatives by GC${\times}$GC-TOFMS, it can detect m/z 73 as the base ion for the identification of Levoglucosan. It can also observe m/z 217 and 204 with existence of m/z 333. Although the ratios of m/z 217 and m/z 204 to the base ion (m/z 73) in the mass spectrum of GC${\times}$GC-TOFMS lower than those of GC/MS, Levoglucosan can be separated and characterized from D (-) +Ribose in the mixture of sugar compounds. At last, the environmental significance of Levoglucosan will be discussed with respect to the health effect to offer important opportunities for clinical and potential epidemiological research for reducing incidence of cardiovascular and respiratory diseases.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.2
• /
• pp.201-208
• /
• 2007

Functional oils (FOs) were produced from commercial diacylglycerol oil and red yeast rice extracts from 80% ethanol for 1 hr in a shaking water bath at $35^{\circ}C$ and 175 rpm. FOs contained (A) 600, (B) 1200, (C) 1800, and (D) 2280 ppm of red yeast-rice extracts, respectively. The Hunter a value and b value were risen whereas L value was reduced along with the increase of extract concentration. Content of monacolin K and total phenolic compounds in FOs significantly increased according to the increase of extract concentration. The oxidation stability of FOs was observed by Rancimat at $98^{\circ}C$. Induction time decreased according to the increase of extract concentration. The major volatile compounds of FOs were compared using the electronic nose (EN) system and solid phase microextraction (SPME) method combined with gas chromatograph/mass spectrometry (GC/MS). EN was composed of 12 different metal oxide sensors. Sensitivities (Rgas/Rair) of sensors from EN were analyzed by principal component analysis (PCA), whose proportion was 99.66%. For qualitative or quantitative analysis of volatile compounds by SPME-GC/MS, the divinylbenzene/carboxene/polydimethyl-siloxane fiber and sampling temperature of $50^{\circ}C$ were applied.

• Archives of Pharmacal Research
• /
• v.27 no.7
• /
• pp.734-737
• /
• 2004

5,8-Epidioxycholest-6-en-3-ol (1), cholesterol (2), glycerol 1-palmitate (3) and glycerol 1,3-dioleate-2-stearate (4) were isolated from the methanol extract of the sea urchin Diadema setosum, which was collected from the Halong sea, Vietnam. Chemical structures were established based on extensive 1D, 2D-NMR, FAB-MS, EI-MS spectroscopic data and GC-MS analysis. The NMR spectral data of compound 1 were reassigned by using HMQC and HMBC. Compound 1 was found to have strong cytotoxic effect against various cancer cell lines, such as KB ($IC_{50}$, 2.0 $\mu\textrm{g}$/mL), FL($IC_{50}$, 3.93 $\mu\textrm{g}$/mL), and Hep-2 ($IC_{50}$, 2.4 $\mu\textrm{g}$/mL) by in vitro assay.

• Bulletin of the Korean Chemical Society
• /
• v.34 no.1
• /
• pp.139-142
• /
• 2013

A study was carried out to evaluate the solid phase micro-extraction (SPME) for formaldehyde emission analysis of uncoated plywood. In SPME, formaldehyde was on-fiber derivatized through headspace extraction and analyzed by gas chromatography coupled with mass spectrometry (GC/MS). The SPME was compared with desiccators (DC-JAS 233), small-scale chamber (SSC-ASTM D6007) and liquid-liquid extraction (LLE-EPA 556) methods which were performed in accordance with their respective standards. Compared to SSC (RSD 4.3%) and LLE (RSD 5.0%), the SPME method showed better repeatability (RSD 1.8%) and not much difference from DC (RSD 1.4%). The SPME has proven to be highly precise (at 95% confidence level) with better recovery (REC 102%). Validation of the SPME method for formaldehyde quantitative analysis was evidenced. In addition, the SPME by air sampling directly from plywood specimens (SPME-W) correlated best with DC ($r^2$ = 0.983), followed by LLE ($r^2$ = 0.950) and SSC ($r^2$ = 0.935).

• Mass Spectrometry Letters
• /
• v.12 no.2
• /
• pp.31-40
• /
• 2021

Probable human carcinogenic compounds nitrosamines, have been detected as by-product impurities in sartan pharmaceuticals in recent years which has drawn worries for medication safety. To provide a sensitive and effective method for the quality control of sartan pharmaceuticals, this study established a feasible gas chromatography-tandem mass spectrometry (GC-MS/MS) method for simultaneous determination of 13 nitrosamines. The target analytes were separated on a DB-WAX Ultra Inert column (30 m × 0.25 mm; i.d., 0.25 ㎛) and were then subjected to electron impact ionization in multiple reaction monitoring mode. The established method was validated and further employed to analyze authentic samples. Limits of detection (LODs) and limits of quantification (LOQs) of the 13 nitrosamines were 15-250 ng/g and 50-250 ng/g, respectively, which also exhibited intra-day and inter-day accuracies of 91.4-104.8%, thereby satisfying validation criteria. Five nitrosamines, viz., N-nitrosodiethylamine, N-nitrosodimethylamine, N-nitrosodiphenylamine, N-nitrosomorpholine, and N-nitrosopiperidine were detected at concentrations above their LODs in 68 positive samples out of 594 authentic samples from seven sartans.

• Journal of Food Hygiene and Safety
• /
• v.22 no.4
• /
• pp.243-247
• /
• 2007

A selective analytical method of headspace-GC/MS has been applied to determine levels of benzene in beverages. Food samples were 85 including 2 fruit juices, 6 fruit beverages, 11 carbonated beverages, 55 mixed beverages, and 4 beverage concentrations, and 7 extracted beverages. For phase equilibration of headspace, sample was stirred at $40^{\circ}C$ for 30 min. The oven temperature was $60^{\circ}C$ and elevated to $180^{\circ}C$ at $15^{\circ}C/min$. The internal standard was benzene-d6. The identification was done by the selected target ions such as m/z 51, 77, and 78 and the confirmation was done by the response ratio of m/z 77 to m/z 78 between sample and standard. The overall recoveries were ranged from 91% to 101% and the limit of quantification was $1{\mu}g/kg$. The average level of benzene were $5{\mu}g/kg$ for fruit beverages, $2{\mu}g/kg$ for carbonated beverages, $7{\mu}g/kg$ for mixed beverages and $7{\mu}g/kg$ for extracted beverages.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.19 no.4
• /
• pp.311-314
• /
• 1990

The volatile fraction of Oenanthe stolonifera DC. was extracted by a steam distillation under the atmospheric pressure and analyzed by gas chromatography(GC) and gas chromatogra-phy/mass spectrometry(Gc-MS) The experimental results revealed the presence of 63 volatile components. Among them 39 components identified were composed of 20 hydrocarbonss(61.94%) 9 alcohols(8.76%) 3 ketones(11.5%) 1 ester(1.34%) 1 aldehyde (2.29%) and 5 miscellaneous \ulcorner92.35%) The major volatile components of Oenanthe stolonifera DC. were limo-nene(12.12%) pulegone(94.8%) germacrene D(8.34%) and $\beta$-pinene(7.68%)

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.15 no.3
• /
• pp.138-146
• /
• 2015

Purpose: If early diagnosis is not made, patients with metabolic disorders as homocystinemia rapidly progress to physical defect or mental retardation resulted in storage of the toxic material into the brain. Therefore, it is necessary to develop an analytical method for a rapid screening and/or correct confirmation diagnosis. Methods: The standard solution of sulfur amino acids spiked plasma was subjected to protein precipitation with methanol, and then consecutively derivatized with trimethylsilyl (TMS) and trifluoroacyl (TFA) and determined by GC-MS. The formation of TMS derivative of the hydroxyl and TFA derivative of amino functional group was performed by BSTFA and MBTFA, respectively. Selective ion monitoring (SIM) mode was used for quantification with selected specific ions. Results: A calibration curve on standard spiked pooled plasma showed a linear relationship with correlation coefficient of 0.9936-0.9992 for all compounds over the range of 0.1-300 ng. The precision and accuracy were within S.D. of 1-15% and RSD of 1-15% for intra-day assay at 2 ng/mL, 15 ng/mL and 30 ng/mL. LOD and LOQ was 0.4 ng/mL and 4 ng/mL respectively. Conclusion: A rapid analytical method was developed to quantify sulfur amino acids and methyl malonic acid, after two-step derivatization procedure with good sensitivity and specificity on human plasma. Advantages of a new method are simplicity and rapidity. The method could be useful for routine analysis, diagnosis of homocysteinemia.

• Analytical Science and Technology
• /
• v.14 no.3
• /
• pp.221-229
• /
• 2001

The bioequivalence study of two tiropramide products was evaluated in 16 health male volunteers following intra-muscular injection. Test product was Tiram$^{(R)}$ injection (S Pharm. Co, Ltd.) and reference product was Tiropa$^{(R)}$ injection(D Pharm. Co., Ltd.). The drug concentration in plasma was determined by GC/MS for over a period of 8 hours after injection. Analysis of variance reveal that there are no differences in AUC (area under the plasma concentration-time curve from time zero to infinity), Cmax (maximum plasma concentration) and Tmax (time to reach Cmax). The differences of mean AUC, Cmax and Tmax between two products were 0.73, -1.385 and -12.994%, respectively. Minimum detectable differences (%) at ${\alpha}=0.05$ were all less than 20% given as a guideline (10.05, 17.90 and 19.01% for AUC, Cmax and Tmax, respectively). From these results, the two formulations of tiropramide are bioequivalent and thus, may be prescribed interchangeably.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.6
• /
• pp.458-463
• /
• 2010

MLCC (multi-layer ceramic capacitor) is usually fabricated by lamination of predetermined number of single layers. Often, the state of MLCC before sintering is called the green state, whose strength comes from the adhesion between the dielectric material and the polymer binder. Therefore the lamination of a single layer before sintering can be easily deformed by environment due to the relatively lower strength. After the compression process, which helps single sheets cohereto with adjacent sheets, the MLCC green bar is preheated to resolve the probable internal stress. Unfortunately, unexpected deformation after preheating resulted in problems during cutting of the MLCC green bar. In this study, one of 2 primary hypotheses which were proposed to resolve the unexpected deformation after preheating was examined by quantitative experiment with GC/MS (gas chromatograpy/mass spectrometer). The proportion of deformation caused by DOP evaporation, which was primarily evaporated componet during preheating, to the total deformation of the MLCC green bar was found to be 53%.