• 한국정밀공학회지
• /
• 제11권6호
• /
• pp.42-49
• /
• 1994

One of the parameters that influence the productivity of every industry, involved in metal cutting, is the chip from ; continuous or broken chip. Chip form varies according to machining conditions, material used, tool geometry and chip breaker geometry. Therefore, in this study we carried out the experiment on the chip control in machining STS304 using an attached obstruction type chip breaker. Namely, with the change of a chip breaker distance, chip breaker angle, cutting characteristics in machining STS304 which is well-known as a machining difficult material and produces a saw-toothed chip. The results of the experiment are as follows : 1. The chip breaker distance and angle under which the preferred chip is produced, show 1.5mm and 60 .deg. , while chip breaker angle in machining an ordinary steel was well-known 45 .deg. . 2. During the cutting process, the change of feed than the change of velocity was applied as cutting conditions, effects more clearly on the chip breaking. 3. Considering a whole surface roughness, it is not advisable to apply chip breaker mentioned above for precision cutting.

• 산업공학
• /
• 제9권2호
• /
• pp.129-141
• /
• 1996

Recently, the tire mold of a passenger car is made almost via aluminum casting, and it is necessary to prepare a master model of the tire for the casting. Because of the geometrical feature of tire, as well known, the master model must be machined by a 5-axis NC machine. The paper proposes a procedure to model and machine the master model. The approach includes (a) transformation of 2D drawing of tire into 3D geometry, (b) modeling surfaces of tire, and (c) inverse kinematics of a 5-axis NC machine. An implementation of the proposed procedure is also presented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.441-442
• /
• 2012

• 한국융합학회논문지
• /
• 제8권5호
• /
• pp.185-192
• /
• 2017

공작기계의 오차는 크게 기하하적 오차, 열변형 오차 및 가공오차로 나눌 수 있다. 본 연구에서는 2차원 가공에서, 각 오차의 원인이 전체 오차에 미치는 영향과 각 오차의 상대적 크기를 정량적으로 분석하였다. 오차의 상대적 크기는 열변형 오차와 가공오차가 상대적으로 기하학적 오차에 비해 크게 나타났으며, 이는 가공 정밀도에 직접적으로 관계된다고 판단되었다. 세 가지 오차를 제거하기 위해 측정된 오차 프로파일을 이용하여 오차의 보정가능성을 검토하였다. 그 결과 각각의 오차요인에 대하여 약 50%의 시스템 오차를 보정할 수 있었으며, 특히, 열변형 오차와 가공오차의 경우 큰 폭으로 오차를 보정할 수 있음을 확인하였다. 본 연구를 통하여 가공에 관한 기본적인 데이터 베이스를 구축할 수 있으며, 이를 통해 사용자 관점에서 가공오차에 대한 보정이 가능할 것으로 기대된다.

• 한국정밀공학회지
• /
• 제23권2호
• /
• pp.35-42
• /
• 2006

Although the conventional contour parallel tool path obtained from geometric information has been successful to make desirable shape, it seldom consider physical process concerns like cutting forces and chatters. In this paper, an optimized contour parallel path, which maintains constant MRR(material removal rates) at all time, is introduced and the result is verified. The optimized tool path is based on a conventional contour parallel tool path. Additional tool path segments are appended to the basic tool path in order to achieve constant cutting forces and to avoid chatter vibrations at the entire machining area. The algorithm has been implemented for two dimensional contiguous end milling operations with flat end mills, and cutting tests were conducted to verify the significance of the proposed method.

• 한국정밀공학회지
• /
• 제29권2호
• /
• pp.139-146
• /
• 2012

A multi-tasking machine tool for large scale marine engine crankshafts has been developed together with design technologies for its special devices. Since work pieces, that is, crankshafts to be machined are big and heavy; weight of over 100 tons, length of 10 m long, and diameter of over 3.5 m, several special purpose core devices are necessarily developed such as PTD (Pin Turning Device) for machining eccentric pin parts, face place and steady rest for chucking and resting heavy work pieces. PTD is a unique special purpose device of open-and-close ring typed structure equipped with revolving ring spindle for machining eccentric pins apart from journal. In order to achieve high rigidity of the machine tool, structural design optimization using TMSA (Taguch Method based Sequential Algorithm) has been completed with FEM structural analysis, and a hydrostatic bearing system for the PTD has been developed with theoretical hydrostatic analysis.

• 한국시뮬레이션학회논문지
• /
• 제17권2호
• /
• pp.1-12
• /
• 2008

자동차 엔진을 구성하는 주요부품은 실린더블록, 실린더헤드, 크랭크샤프트, 커넥팅로드, 캠샤프트 등으로 구성되는데 이들의 영문명을 따서 5C라고 부른다. 따라서 일반적으로 엔진공장은 5C를 생산하는 라인과, 엔진 조립라인을 포함하는 6개의 라인으로 구성이 된다. 엔진공장은 소품종대량생산의 특성을 가지기 때문에 장비의 배치형태는 흐름라인의 형태를 따른다. 본 논문에서는 국내 자동차 회사 엔진공장의 크랭크샤프트라인 설계를 위한 시뮬레이션 사례를 소개한다. 크랭크샤프트 라인은 기계가공을 중심으로 하는 라인이다. 따라서 라인설계에 영향을 미치는 요인들에 대해 소개하고, 라인 효율에 미치는 영향을 $QUEST^{(R)}$라는 3차원 시뮬레이션 도구를 이용하여 분석하였다. 기술팀에서 제시한 초기배치안에 대해 시뮬레이션 모델을 구축한 후 실험을 통하여 시스템 효율을 개선시키기 위한 방법을 제시하였다.

• Structural Engineering and Mechanics
• /
• 제76권5호
• /
• pp.561-578
• /
• 2020

The present work addresses the surface integrity and chip morphology in finish hard turning of AISI D3 steel under nanofluid assisted minimum quantity lubrication (NFMQL) condition. The surface integrity aspects include microhardness, residual stress, white layer formation, machined surface morphology, and surface roughness. This experimental investigation aims to explore the feasibility of low-cost multilayer (TiCN/Al2O3/TiN) coated carbide tool in hard machining applications and to assess the propitious role of minimum quantity lubrication using graphene nanoparticles enriched eco-friendly radiator coolant based nano-cutting fluid for machinability improvement of hardened steel. Combined approach of central composite design (CCD) - analysis of variance (ANOVA), desirability function analysis, and response surface methodology (RSM) have been subsequently employed for experimental investigation, predictive modelling and optimization of surface roughness. With a motivational philosophy of "Go Green-Think Green-Act Green", the work also deals with economic analysis, and sustainability assessment under environmental-friendly NFMQL condition. Results showed that machining with nanofluid-MQL provided an effective cooling-lubrication strategy, safer and cleaner production, environmental friendliness and assisted to improve sustainability.

• International Journal of CAD/CAM
• /
• 제3권1_2호
• /
• pp.1-12
• /
• 2003

When milling concave corners, cutter load increases momentarily and fluctuates severely due to concentration and uneven distribution of material stock. This abrupt change of cutter load produces undesirable machining results such as wavy machined surface and cutter breakage. An important factor for studying cutter load in 2.5D pocket milling is the instantaneous Radial Depth of Cut (RDC). However, previous work on RDC under different corner-cutting conditions is lacking. In this different corner shapes. In our work, we express RDC mathematically in terms of the instantaneous cutter engage angle which is defined as Cutter Swept Angle (CSA). An analytical approach for modeling CSA is explained. Finally, examples are shown to demonstrate that the proposed CSA modeling method can give an accurate prediction of cutter load pattern at cornering cut.

• 한국기계가공학회지
• /
• 제5권2호
• /
• pp.3-9
• /
• 2006

HSM(High-speed Machining) is widely used in rapid manufacturing of precision products and molds of various materials. Improvement in cutting efficiency is one of the important subjects in the HSM process. To analyse the dynamic behavior during a very short cutting time, the computational analysis code, LS-DYNA3D, was employed for the simulation of the mechanism of HSM for aluminium 7075. This cutting mechanism includes some difficult points in simulation, for example, material and geometrical non-linearity, high-speed dynamic impact, contact with friction, etc. In this paper, a finite element model considering the strain rate effect is proposed to predict the cutting phenomena such as chip deformation, strain and stress distributions, which will help us to design the HSM process.