• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 1998년도 하계종합학술대회논문집
• /
• pp.387-390
• /
• 1998

In this paper, HBT's with lower phase noise and passive elements, such as resistors, capacitors and inductors, for resonance and impedance matching networks are designed, fabricated, tested, and carefully analysed, respectively, and then, they are integrated for the design and fabrication of functional X-band oscillators with lower phase noise. Epi-wafers for HBT's with the structure of graded $Al_{x}$G $a_{1-x}$ As emitter and C-doped base layer of 700.angs. thick were used to specially emphasize the improvement of $f_{T}$ and $f_{max}$, and the lowering of phase noise, in design aspects. At the test frequencies of 12GHz, capacitances of MIM capacitors, spiral inductor, and resistances are 0.5~10pF, 0.4~11.06nH, and 20~1,380.ohm., respectively. The emitter size of HBY's for the X-band MMIC oscillators is 3*10u $m^{2}$, and find chip size is 0.9*0.9m $m^{2}$..EX>.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.2
• /
• pp.1217-1219
• /
• 2003

상용화되어 있는 이동통신 기기의 Front-end 부분은 듀플렉서와 필터를 포함하는 수동소자로 구성되어 있다. 듀플렉서의 임피던스 정합선로는 전송선로 이론으로부터 설계하며, 단순하게 ${\lambda}=1/4$ 파장 길이의 정합 선로를 설치하는 것이기 때문에 정합선로를 이용한 듀플렉서 성능을 극대화하기 위한 설계의 융통성이 없는게 현실이다. 이런 문제점을 해결하기 위하여 집중소자(lumped element)인 R L C를 탄성 표면파 듀플렉서 대신 스위치 모들에 적용하게 된다면 여러 가지 다양한 형태의 회로를 구현할 수 있고 회로망 내에 위치하는 집중소자의 정격을 최적화하여 스위치 모듈의 성능을 향상시킬 수 있는 가능성이 있다. 본 연구에서는 $900 MHz{\sim}2.2 GHz$의 대역에서 소형화 집적화에 적용 가능한 디바이스를 개발하기 위하여 고주파, 저진압, 저손실 스위치 모듈의 제조와 구성되는 커패시터와 인덕터의 제조와 특성에 관하여 연구하였다.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.385-388
• /
• 2000

본 논문에서는 좀더 효율적이고 소형화한 GPS(Global Positioning System)용 안테나와 LNA(Low Noise Amplifier)를 IMT-2000 단말기에 내장함으로써 개인 휴대 통신 기능과 더불어 좀 더 정확한 위치추적 기능을 동시에 가능케 하고자 한다. 중심 주파수 1.575 GHz의 저잡음 증폭기와 안테나의 크기는, 합쳐서 10$\times$10$\times$4 (mm)로서 상층은 마이크로스트립 패치 안테나이고, 중간층은 안테나 ground와 LNA ground의 공통 ground이며, 제일 아래층에는 LNA가 위치하게 된다. LNA 의 경우 2단을 중첩하여, 첫째 단 16dB, 둘째 단 18dB의 이득 특성을 보였는데 첫째, 둘째 단의 대역통과 필터에서 삽입손실로 3dB의 손실을 가져와 총 3dB의 이득 특성을 보였다. 잡음 특성은 약 1.9의 특성을 보였다. 안테나의 경우 9$\times$9$\times$$\times$2 (mm)로써, 고유전율( $\varepsilon$$_{r}$ = 73 )의 세라믹을 사용하여 그 크기를 상당부분 줄였다. 그리고 유전체 밑의 ground를 옆면까지 높임으로써 좀 더 소형화한 안테나를 가능케 하였다. 고유전율의 유전체를 사용하였기에 안테나 자체의 이득 특성은 저잡음 증폭기에서 보상하고, 안테나의 임피던스 정합 또한 LNA의 입력 쪽에서 하도록 하였다. 또한 위성신호 수신을 위해 안테나는 RHCP 의 원형편파 특성을 갖는다.

• 천문학회보
• /
• 제42권1호
• /
• pp.51.3-51.3
• /
• 2017

To investigate the connection between radio activity and AGN outflows, we present a study of ionized gas kinematics by using [O III] ${\lambda}5007$ emission line along the radio jet for six radio AGNs. These AGNs are selected based on the radioactivity (L1.4GHz ${\geq}$ 1039.8 erg s-1) as well as optical properties as type 2 AGNs. By using the high spatial resolution of the Red Channel Cross Dispersed Echellette Spectrograph at the Multiple Mirror Telescope, we investigate in detail the [O III] and stellar kinematics. We spatially resolve and probe the central AGN-photoionization sizes, which is important in understanding the structures and evolutions of galaxies. We find that the typical central AGN-photoionization sizes of our targets are in range of 1.8-3.8 kpc. We study the [O III] kinematics along the radio jets to test whether there is a link between gas outflows in the narrow-line region and radio jet emissions. Contrary to our expectation, we find no evidence that the gas outflows are directly connected to radio jet emission.

• 디지털산업정보학회논문지
• /
• 제12권1호
• /
• pp.89-95
• /
• 2016

Recent growth of hacking threats and development in software and technology put Network security under threat, In addition, intrusion, malware and worm virus have been increased due to the existence of variety of sophisticated hacking methods. The goal of this study is to compare Snort Alpha version with Suricata 2.0.11 version whereas previous study focuses on comparison between snort 2. x version under thread environment and Suricata under multi-threading environment. This thesis' experiment environment is set as followed. Intel (R) Core (TM) i5-4690 3. 50GHz (4threads) of CPU, 16GB of RAM, 3TB of Seagate HDD, Ubuntu 14.04 are used. According to the result, Snort Alpha version is superior to Suricata in performance, but Snort Alpha had some glitches when executing pcap files which created core dump errors. Therefore this experiment seeks to analyze which performs better between Snort Alpha version that supports multi packet processing threads and Suricata that supports multi-threading. Through this experiment, one can expect the better performance of beta and formal version of Snort in the future.

• KIEE International Transactions on Power Engineering
• /
• 제2A권4호
• /
• pp.131-135
• /
• 2002

This paper describes a new ultra-fast contingency screening algorithm for on-line TSA without time simulation. All machines are represented in a classical model and the stability index is defined as the ratio between acceleration power during a fault and deceleration power after clearing the fault. Critical clustering of machines is done based on the stability index, and the power-angle curve of the critical machines is drawn assuming that the angles of the critical machines increase uniformly, while those of the non-critical ones remain constant. Finally, the critical clearing time (CCT) is computed using the power-angle curve. The proposed algorithm is tested on the KEPCO system comprised of 900-bus and 230-machines. The CCT values computed with the screening algorithm are in good agreement with those computed using the detailed model and the SIME method. The computation time for screening about 270 contingencies is 17 seconds with 1.2 GHz PC.

• Smart Structures and Systems
• /
• 제1권3호
• /
• pp.267-282
• /
• 2005

This work describes ongoing development of an embedded sensor system for the early detection and prevention of deterioration of reinforcing steel tendons within reinforced concrete. These devices will evaluate the condition of the steel tendon using ultrasonic techniques and then wirelessly transmit this data to the outside world without human intervention. The ultrasonic transducers and the interpretation of the sensed signals that allow detection and prognosis of tendon condition are detailed. Electrical characterization of concrete mixtures used in bridge construction is conducted and a wideband microstrip antenna is designed and fabricated to operate between 2.4 and 2.5 GHz when embedded in such a medium. Simulations and measurements of the embedded antenna element are presented. Transceiver selection and implementation are discussed as well as future work in operational protocols, sensor networking, and power sources. By implementing commercially available off-the-shelf components whenever possible, these devices have the potential to save millions of dollars a year in evaluation, repair and replacement of reinforced concrete.

• JSTS:Journal of Semiconductor Technology and Science
• /
• 제8권3호
• /
• pp.179-192
• /
• 2008

A multiphase compensation method with mismatch linearization technique, is presented and demonstrated in a $\Sigma-\Delta$ fractional-N frequency synthesizer. An on-chip delay-locked loop (DLL) and a proposed delay line structure are constructed to provide multiphase compensation on $\Sigma-\Delta$ quantizetion noise. In the delay line structure, dynamic element matching (DEM) techniques are employed for mismatch linearization. The proposed $\Sigma-\Delta$ fractional-N frequency synthesizer is fabricated in a $0.18-{\mu}m$ CMOS technology with 2.14-GHz output frequency and 4-Hz resolution. The die size is 0.92 mm$\times$1.15 mm, and it consumes 27.2 mW. In-band phase noise of -82 dBc/Hz at 10 kHz offset and out-of-band phase noise of -103 dBc/Hz at 1 MHz offset are measured with a loop bandwidth of 200 kHz. The settling time is shorter than $25{\mu}s$.

• Journal of electromagnetic engineering and science
• /
• 제14권2호
• /
• pp.54-60
• /
• 2014

A systematic design for asymmetric coupled-section Marchand baluns is presented. Asymmetrically coupled transmission lines in multilayer configuration are exploited for constructing Marchand baluns. Design equations for characteristic impedance and electrical length of asymmetrical coupled transmission lines are derived for establishing a systematic design procedure. Novel Marchand balun based on these design equations is composed of two identical asymmetrical coupled transmission lines. However, contrary to the general conventional design approach where ranges for characteristic impedances of coupled lines are ambiguously capitalized, values for characteristic impedance and length are explicitly expressed. Our approach is fundamentally different from the design method using coupling coefficients where solution for coupling coefficient is inherently restricted. To verify the proposed method, one design example is performed for wideband Marchand balun in multilayer configuration, and is fabricated for verifying the design procedure proposed. Maintaining the return loss more than 10 dB, the bandwidth is measured from 0.43 to 1.0 GHz, where $S_{21}$ and $S_{31}$ show better than -4 dB. The measured phase and amplitude imbalances illustrate 0.5 dB and ${\pm}5^{\circ}$, respectively.

• 천문학논총
• /
• 제30권2호
• /
• pp.433-437
• /
• 2015

We show the results of a time series analysis of the long-term light curves of four blazars. 3C 279, 3C 345, 3C 446, and BL Lacertae. We used densely sampled light curves spanning 32 years at three frequency bands (4.8, 8, 14.5 GHz), provided by the University of Michigan Radio Astronomy Observatory monitoring program. The spectral indices of our sources are mostly flat or inverted (-0.5 < ${\alpha}$ < 0), which is consistent with optically thick emission. Strong variability was seen in all light curves on various time scales. From the analyses of time lags between the light curves from different frequency bands and the evolution of the spectral indices with time, we find that we can distinguish high-peaking flares and low-peaking flares according to the Valtaoja et al. classification. The periodograms (temporal power spectra) of the light curves are in good agreement with random-walk power-law noise without any indication of (quasi-)periodic variability. We note that random-walk noise light curves can originate from multiple shocks in jets. The fact that all our sources are in agreement with being random-walk noise emitters at radio wavelengths suggests that such behavior is a general property of blazars. We are going to generalize our approach by applying our methodology to a much larger blazar sample in the near future.